Harvest sources

2014 Primary Roads

Primary roads are generally divided, limited-access highways within the interstate highway system or under State management, and are distinguished by the presence of interchanges. These highways are accessible by ramps and may include some toll highways. The MAF/TIGER Feature Classification Code (MTFCC) is S1100 for primary roads.

— Organization: U.S. Census Bureau, Department of Commerce
2014 Rails

The Rails Shapefile includes all features within the MTDB Super Class "Rail Features" distinguished where the MAF/TIGER Feature Classification Code (MTFCC) for the feature in the MTDB that begins with "R". This includes main lines such as spur lines, rail yards, mass transit rail lines such as carlines, streetcar track, and monorail or other mass transit rail and special purpose rail lines such as cog rail lines, incline rail lines and trams.

— Organization: U.S. Census Bureau, Department of Commerce
2014 Current County and Equivalent

The primary legal divisions of most states are termed counties. In Louisiana, these divisions are known as parishes. In Alaska, which has no counties, the equivalent entities are the organized boroughs, city and boroughs, municipalities, and for the unorganized area, census areas. The latter are delineated cooperatively for statistical purposes by the State of Alaska and the Census Bureau. In four states (Maryland, Missouri, Nevada, and Virginia), there are one or more incorporated places that are independent of any county organization and thus constitute primary divisions of their states. These incorporated places are known as independent cities and are treated as equivalent entities for purposes of data presentation. The District of Columbia and Guam have no primary divisions, and each area is considered an equivalent entity for purposes of data presentation. The Census Bureau treats the following entities as equivalents of counties for purposes of data presentation: Municipios in Puerto Rico, Districts and Islands in American Samoa, Municipalities in the Commonwealth of the Northern Mariana Islands, and Islands in the U.S. Virgin Islands. The entire area of the United States, Puerto Rico, and the Island Areas is covered by counties or equivalent entities. The boundaries for counties and equivalent entities are mostly as of January 1, 2013, primarily as reported through the Census Bureau's Boundary and Annexation Survey (BAS). However, some changes made after January 2013, including the addition and deletion of counties, are included.

— Organization: U.S. Census Bureau, Department of Commerce
2014 Current State Legislative District (SLD) Lower Chamber

State Legislative Districts (SLDs) are the areas from which members are elected to State legislatures. The SLDs embody the upper (senate) and lower (house) chambers of the state legislature. Nebraska has a unicameral legislature and the District of Columbia has a single council, both of which the Census Bureau treats as upper-chamber legislative areas for the purpose of data presentation; there are no data by SLDL for either Nebraska or the District of Columbia. A unique three-character census code, identified by State participants, is assigned to each SLD within a state. In Connecticut, Illinois, Louisiana, Maine, Maryland, Massachusetts, Michigan, Ohio, and Puerto Rico, the Redistricting Data Program (RDP) participant did not define the SLDs to cover all of the state or state equivalent area. In these areas with no SLDs defined, the code "ZZZ" has been assigned, which is treated as a single SLD for purposes of data presentation. The boundaries of the 2014 State legislative districts were provided by state-level participants through the RDP and reflect the districts used to elect members in or prior to the November 2014 election.

— Organization: U.S. Census Bureau, Department of Commerce
2014 Alaska Native Regional Corporation

Alaska Native Regional Corporations (ANRCs) were created pursuant to the Alaska Native Claims Settlement Act (ANCSA), which is federal legislation (Pub. L. 92-203, 85 Stat. 688 (1971); 43 U.S.C. 1602 et seq. (2000)) enacted in 1971, as a 'Regional Corporation' and organized under the laws of the State of Alaska as "Regional Corporations" to conduct both the for profit and non profit affairs of Alaska Natives within defined regions of Alaska. Twelve ANRCs cover the entire State of Alaska except for the area within the Annette Island Reserve (an American Indian Reservation under the governmental authority of the Metlakatla Indian Community). There is a thirteenth ANRC that represents the eligible Alaska Natives living outside of Alaska that are not members of any of the twelve ANRCs within the State of Alaska. Because it has no defined geographic extent, this thirteenth ANRC does not appear in the TIGER/Line Shapefiles and the Census Bureau does not provide data for it. The Census Bureau offers representatives of the twelve ANRCs the opportunity to review and update the ANRC boundaries. ANRCs are represented by a 5 character FIPS code unique within Alaska and a nationally unique 8 character National Standard (GNIS) code

— Organization: U.S. Census Bureau, Department of Commerce
2014 Economic Census Planning Region

Planning regions are areas in Puerto Rico. They replace the Commercial Regions which were published for the 2007 and earlier economic censuses. Municipios, equivalent to a county, are grouped into 11 planning regions that are unique to Puerto Rico, and are used only to tabulate economic census data. The Economic Census planning region boundaries are as of January 1, 2012.

— Organization: U.S. Census Bureau, Department of Commerce
2014 Economic Census Metropolitan Statistical Area/Micropolitan Statistical Area

Metropolitan and Micropolitan Statistical Areas are together termed Core Based Statistical Areas (CBSAs) and are defined by the Office of Management and Budget (OMB) and consist of the county or counties or equivalent entities associated with at least one urban core (urbanized area or urban cluster) of at least 10,000 population, plus adjacent counties having a high degree of social and economic integration with the core as measured through commuting ties with the counties containing the core. Categories of CBSAs are: Metropolitan Statistical Areas, based on urbanized areas of 50,000 or more population; and Micropolitan Statistical Areas, based on urban clusters of at least 10,000 population but less than 50,000 population. Economic Census CBSAs are similar to current CBSAs, which are those that the OMB announced and published in February 2013.

— Organization: U.S. Census Bureau, Department of Commerce
2014 American Indian Tribal Subdivision

American Indian tribal subdivisions are administrative subdivisions of federally recognized American Indian reservations/off-reservation trust lands or Oklahoma tribal statistical areas (OTSAs). These entities are internal units of self-government and/or administration that serve social, cultural, and/or economic purposes for the American Indian tribe or tribes on the reservations/off-reservation trust lands or OTSAs. The Census Bureau obtains the boundary and attribute information for tribal subdivisions on federally recognized American Indian reservations and off-reservation trust lands from federally recognized tribal governments through the Census Bureau's Boundary and Annexation Survey (BAS). For the 2010 Census, the boundaries for tribal subdivisions on OTSAs were also obtained from federally recognized tribal governments through the Tribal Statistical Areas Program (TSAP). Note that tribal subdivisions do not exist on all reservations/off-reservation trust lands or OTSAs, rather only where they were submitted to the Census Bureau by the federally recognized tribal government for that area. The boundaries for American Indian tribal subdivisions are as of January 1, 2013, as reported by the federally recognized tribal governments through the Census Bureau's Boundary and Annexation Survey (BAS). The boundaries for tribal subdivisions on OTSAs are those reported as of January 1, 2010 through TSAP.

— Organization: U.S. Census Bureau, Department of Commerce
2014 2010 Census Block

Census Blocks are statistical areas bounded on all sides by visible features, such as streets, roads, streams, and railroad tracks, and/or by nonvisible boundaries such as city, town, township, and county limits, and short line-of-sight extensions of streets and roads. Census blocks are relatively small in area; for example, a block in a city bounded by streets. However, census blocks in remote areas are often large and irregular and may even be many square miles in area. A common misunderstanding is that data users think census blocks are used geographically to build all other census geographic areas, rather all other census geographic areas are updated and then used as the primary constraints, along with roads and water features, to delineate the tabulation blocks. As a result, all 2010 Census blocks nest within every other 2010 Census geographic area, so that Census Bureau statistical data can be tabulated at the block level and aggregated up to the appropriate geographic areas. Census blocks cover all territory in the United States, Puerto Rico, and the Island Areas (American Samoa, Guam, the Commonwealth of the Northern Mariana Islands, and the U.S. Virgin Islands). Blocks are the smallest geographic areas for which the Census Bureau publishes data from the decennial census. A block may consist of one or more faces.

— Organization: U.S. Census Bureau, Department of Commerce
2014 2010 Census 5-Digit ZIP Code Tabulation Area (ZCTA5)

ZIP Code Tabulation Areas (ZCTAs) are approximate area representations of U.S. Postal Service (USPS) ZIP Code service areas that the Census Bureau creates to present statistical data for each decennial census. The Census Bureau delineates ZCTA boundaries for the United States, Puerto Rico, American Samoa, Guam, the Commonwealth of the Northern Mariana Islands, and the U.S. Virgin Islands once each decade following the decennial census. Data users should not use ZCTAs to identify the official USPS ZIP Code for mail delivery. The USPS makes periodic changes to ZIP Codes to support more efficient mail delivery.The Census Bureau uses tabulation blocks as the basis for defining each ZCTA. Tabulation blocks are assigned to a ZCTA based on the most frequently occurring ZIP Code for the addresses contained within that block. The most frequently occurring ZIP Code also becomes the five-digit numeric code of the ZCTA. These codes may contain leading zeros. Blocks that do not contain addresses but are surrounded by a single ZCTA (enclaves) are assigned to the surrounding ZCTA. Because the Census Bureau only uses the most frequently occurring ZIP Code to assign blocks, a ZCTA may not exist for every USPS ZIP Code. Some ZIP Codes may not have a matching ZCTA because too few addresses were associated with the specific ZIP Code or the ZIP Code was not the most frequently occurring ZIP Code within any of the blocks where it exists. The ZCTA boundaries in this release are those delineated following the 2010 Census.

— Organization: U.S. Census Bureau, Department of Commerce
2014 Metropolitan Statistical Area/Micropolitan Statistical Area

Metropolitan and Micropolitan Statistical Areas are together termed Core Based Statistical Areas (CBSAs) and are defined by the Office of Management and Budget (OMB) and consist of the county or counties or equivalent entities associated with at least one urban core (urbanized area or urban cluster) of at least 10,000 population, plus adjacent counties having a high degree of social and economic integration with the core as measured through commuting ties with the counties containing the core. Categories of CBSAs are: Metropolitan Statistical Areas, based on urbanized areas of 50,000 or more population; and Micropolitan Statistical Areas, based on urban clusters of at least 10,000 population but less than 50,000 population. The CBSAs boundaries are those defined by OMB based on the 2010 Census and published in 2013.

— Organization: U.S. Census Bureau, Department of Commerce
2014 Current Tribal Block Group

A tribal block group is a cluster of census tabulation blocks within a single tribal census tract delineated by American Indian tribal participants or the Census Bureau for the purpose of presenting demographic data on their reservation and/or off-reservation trust land. The tribal block groups are defined independently of the standard county-based block group delineation. For federally recognized American Indian Tribes with reservations and/or off-reservation trust lands with a population less than 1,200, a single tribal block group is defined. Qualifying reservations and/or off-reservation trust lands with a population greater than 1,200 could define additional tribal block groups within their area without regard to the standard block group configuration. Tribal block groups do not necessarily contain tabulation blocks always beginning with the same number and could contain seemingly duplicate block numbers. Tabulation block numbers are still assigned by using standard block groups, not the tribal block groups. To better identify tribal block groups, the letter code range A through K (except I, which could be confused with a number 1) is used uniquely within each tribal census tract. The boundaries of tribal block groups and tribal census tracts are those delineated through the Tribal Statistical Areas Program (TSAP) for the 2010 Census.

— Organization: U.S. Census Bureau, Department of Commerce
2014 Current Census Tract

Census tracts are small, relatively permanent statistical subdivisions of a county or equivalent entity, and were defined by local participants as part of the 2010 Census Participant Statistical Areas Program. The Census Bureau delineated the census tracts in situations where no local participant existed or where all the potential participants declined to participate. The primary purpose of census tracts is to provide a stable set of geographic units for the presentation of census data and comparison back to previous decennial censuses. Census tracts generally have a population size between 1,200 and 8,000 people, with an optimum size of 4,000 people. When first delineated, census tracts were designed to be homogeneous with respect to population characteristics, economic status, and living conditions. The spatial size of census tracts varies widely depending on the density of settlement. Physical changes in street patterns caused by highway construction, new development, and so forth, may require boundary revisions. In addition, census tracts occasionally are split due to population growth, or combined as a result of substantial population decline. Census tract boundaries generally follow visible and identifiable features. They may follow legal boundaries such as minor civil division (MCD) or incorporated place boundaries in some States and situations to allow for census tract-to-governmental unit relationships where the governmental boundaries tend to remain unchanged between censuses. State and county boundaries always are census tract boundaries in the standard census geographic hierarchy. In a few rare instances, a census tract may consist of noncontiguous areas. These noncontiguous areas may occur where the census tracts are coextensive with all or parts of legal entities that are themselves noncontiguous. For the 2010 Census, the census tract code range of 9400 through 9499 was enforced for census tracts that include a majority American Indian population according to Census 2000 data and/or their area was primarily covered by federally recognized American Indian reservations and/or off-reservation trust lands; the code range 9800 through 9899 was enforced for those census tracts that contained little or no population and represented a relatively large special land use area such as a National Park, military installation, or a business/industrial park; and the code range 9900 through 9998 was enforced for those census tracts that contained only water area, no land area.

— Organization: U.S. Census Bureau, Department of Commerce
Census Bureau Planned Acquisition

The Census Bureau updates and maintains address data to support the correct allocation of population and housing for censuses and surveys. Boundaries, streets, addresses, structure points, and selected other features are maintained in the Master Address File/Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) database. The Census Bureau collects geographic and address data from tribal, state, and local governments through a Geographic Support System Initiative (GSS-I) Partnership Program and through other geographic programs, such as the annual Boundary and Annexation Survey. When the Census Bureau updates the MAF/TIGER database with new or corrected street, address and structure point data, the boundary network must be updated concurrently to preserve geographic relationships. Additional sources of data are required to ensure complete coverage of all street centerlines and addresses for the fifty States, the District of Columbia, Puerto Rico, and the Island Areas. Some government partners are unable to provide street and address data that meets the Census Bureau's requirements. Therefore, the Census Bureau is requesting proposals for provision of address data from commercial vendors that can be easily integrated into the MAF/TIGER database.

— Organization: U.S. Census Bureau, Department of Commerce
2015_aiannh_500k

The American Indian/Alaska Native/Native Hawaiian (AIANNH) Areas cartographic boundary file includes generalized versions of the following legal entities: federally recognized American Indian reservations and off-reservation trust land areas, state-recognized American Indian reservations, and Hawaiian home lands (HHLs). The statistical entities included are Alaska Native village statistical areas (ANVSAs), Oklahoma tribal statistical areas (OTSAs), tribal designated statistical areas (TDSAs), and state designated tribal statistical areas (SDTSAs). Joint use areas are also included in this shapefile refer to areas that are administered jointly and/or claimed by two or more American Indian tribes. The Census Bureau designates both legal and statistical joint use areas as unique geographic entities for the purpose of presenting statistical data. Note that tribal subdivisions and Alaska Native Regional Corporations (ANRCs) are additional types of American Indian/Alaska Native areas stored by the Census Bureau, but are displayed in separate files because of how they fall within the Census Bureau's geographic hierarchy.

— Organization: U.S. Census Bureau, Department of Commerce
2015_cbsa_5m

Metropolitan and Micropolitan Statistical Areas are together termed Core Based Statistical Areas (CBSAs) and are defined by the Office of Management and Budget (OMB) and consist of the county or counties or equivalent entities associated with at least one urban core (urbanized area or urban cluster) of at least 10,000 population, plus adjacent counties having a high degree of social and economic integration with the core as measured through commuting ties with the counties containing the core. Categories of CBSAs are: Metropolitan Statistical Areas, based on urbanized areas of 50,000 or more population; and Micropolitan Statistical Areas, based on urban clusters of at least 10,000 population but less than 50,000 population. The CBSAs boundaries are those defined by OMB based on the 2010 Census and published in 2013.

— Organization: U.S. Census Bureau, Department of Commerce
2014_cd114_20m

Congressional Districts are the 435 areas from which people are elected to the U.S. House of Representatives. After the apportionment of congressional seats among the States based on census population counts, each State is responsible for establishing congressional districts for the purpose of electing representatives. Each congressional district is to be as equal in population to all other congressional districts in a State as practicable. The 114th Congress is seated from January 2015 to 2017. The cartographic boundary files for the District of Columbia, Puerto Rico, and the Island Areas (American Samoa, Guam, the Commonwealth of the Northern Mariana Islands, and the U.S. Virgin Islands) each contain a single record for the non-voting delegate district in these areas. The boundaries of all other congressional districts are provided to the Census Bureau through the Redistricting Data Program (RDP).

— Organization: U.S. Census Bureau, Department of Commerce
2016_zcta510_500

ZIP Code Tabulation Areas (ZCTAs) are approximate area representations of U.S. Postal Service (USPS) ZIP Code service areas that the Census Bureau creates to present statistical data for each decennial census. The Census Bureau delineates ZCTA boundaries for the United States, Puerto Rico, American Samoa, Guam, the Commonwealth of the Northern Mariana Islands, and the U.S. Virgin Islands once each decade following the decennial census. Data users should not use ZCTAs to identify the official USPS ZIP Code for mail delivery. The USPS makes periodic changes to ZIP Codes to support more efficient mail delivery. The Census Bureau uses tabulation blocks as the basis for defining each ZCTA. Tabulation blocks are assigned to a ZCTA based on the most frequently occurring ZIP Code for the addresses contained within that block. The most frequently occurring ZIP Code also becomes the five-digit numeric code of the ZCTA. These codes may contain leading zeros. Blocks that do not contain addresses but are surrounded by a single ZCTA (enclaves) are assigned to the surrounding ZCTA. Because the Census Bureau only uses the most frequently occurring ZIP Code to assign blocks, a ZCTA may not exist for every USPS ZIP Code. Some ZIP Codes may not have a matching ZCTA because too few addresses were associated with the specific ZIP Code or the ZIP Code was not the most frequently occurring ZIP Code within any of the blocks where it exists. The generalized ZCTA boundaries in this file are based on those delineated following the 2010 Census.

— Organization: U.S. Census Bureau, Department of Commerce
2016_county_500

The primary legal divisions of most states are termed counties. In Louisiana, these divisions are known as parishes. In Alaska, which has no counties, the equivalent entities are the organized boroughs, city and boroughs, municipalities, and for the unorganized area, census areas. The latter are delineated cooperatively for statistical purposes by the State of Alaska and the Census Bureau. In four states (Maryland, Missouri, Nevada, and Virginia), there are one or more incorporated places that are independent of any county organization and thus constitute primary divisions of their states. These incorporated places are known as independent cities and are treated as equivalent entities for purposes of data presentation. The District of Columbia and Guam have no primary divisions, and each area is considered an equivalent entity for purposes of data presentation. The Census Bureau treats the following entities as equivalents of counties for purposes of data presentation: Municipios in Puerto Rico, Districts and Islands in American Samoa, Municipalities in the Commonwealth of the Northern Mariana Islands, and Islands in the U.S. Virgin Islands. The entire area of the United States, Puerto Rico, and the Island Areas is covered by counties or equivalent entities.

— Organization: U.S. Census Bureau, Department of Commerce
2016_kml_bg_500

Block Groups (BGs) are clusters of blocks within the same census tract. Each census tract contains at least one BG, and BGs are uniquely numbered within census tracts. BGs have a valid code range of 0 through 9. BGs have the same first digit of their 4-digit census block number from the same decennial census. For example, tabulation blocks numbered 3001, 3002, 3003,.., 3999 within census tract 1210.02 are also within BG 3 within that census tract. BGs coded 0 are intended to only include water area, no land area, and they are generally in territorial seas, coastal water, and Great Lakes water areas. Block groups generally contain between 600 and 3,000 people. A BG usually covers a contiguous area but never crosses county or census tract boundaries. They may, however, cross the boundaries of other geographic entities like county subdivisions, places, urban areas, voting districts, congressional districts, and American Indian / Alaska Native / Native Hawaiian areas.

— Organization: U.S. Census Bureau, Department of Commerce

660 harvests found