This portion of the USGS data release presents digital elevation models (DEMs) derived from bathymetric and topographic surveys conducted on the Elwha River delta in August 2019 (USGS Field Activity Number 2019-633-FA). Nearshore bathymetry data were collected using two personal watercraft (PWCs) equipped with single-beam echosounders and survey-grade global navigation satellite systems (GNSS) receivers. Topographic data were collected on foot with survey-grade GNSS receivers mounted on backpacks. Positions of the survey platforms were referenced to a GNSS base station placed on a benchmark with known horizontal and vertical coordinates relative to the North American Datum of 1983 (CORS96 realization) and North American Vertical Datum of 1988 based on NGS Geoid09 vertical offsets. The final data were projected in Cartesian coordinates using the Washington State Plane North (meters) coordinate system. A total of 1,067,448 individual elevation points were collected within the survey area between August 26 and August 29, 2019. DEM surfaces were produced from all available elevation data using linear interpolation. Two separate DEMs were constructed. A DEM was produced that covered the entire survey area (approximately 482 ha) with 5-m horizontal resolution. A second DEM with 1-m resolution was produced that covered the river mouth and adjacent areas (approximately 209 ha). The DEMs were created by interpolating between measurements as much as 50 meters apart. For this reason, we cannot evaluate the accuracy of each point in the DEM, only the measurements it is based on. The estimated vertical uncertainties of the bathymetric and topographic measurements are 12 and 5 cm, respectively. Digital data files for each DEM are provided in ESRI ARC ASCII (*.asc) format.