Content deleted Content added
update from Module talk:Convert/makeunits |
update from Module talk:Convert/makeunits |
||
| (56 intermediate revisions by 3 users not shown) | |||
Line 1:
-- Conversion data used by [[Module:Convert]] which uses mw.loadData() for
-- read-only access to this module so that it is loaded only once per page.
-- See [[:en:Template:Convert/Transwiki guide]] if copying to another wiki.
--
-- These data tables follow:
Line 8 ⟶ 9:
--
-- These tables are generated by a script which reads the wikitext of a page that
-- documents the required properties of each unit; see [[:en:Module:Convert/doc]].
---------------------------------------------------------------------------
Line 15 ⟶ 16:
---------------------------------------------------------------------------
local all_units = {
["Gy"] = {
_name1 = "gray",
_symbol = "Gy",
utype = "absorbed radiation dose",
scale = 1,
prefixes = 1,
default = "rad",
link = "Gray (unit)",
},
["rad"] = {
_name1 = "rad",
_symbol = "rad",
utype = "absorbed radiation dose",
scale = 0.01,
prefixes = 1,
default = "Gy",
link = "Rad (unit)",
},
["cm/s2"] = {
name1 = "centimetre per second squared",
Line 37 ⟶ 56:
name1 = "standard gravity",
name2 = "standard gravities",
symbol = "''g''<sub>0</sub>
utype = "acceleration",
scale = 9.80665,
default = "m/s2",
},
["g-force"] = {
name2 = "''g''",
symbol = "''g''",
utype = "acceleration",
scale = 9.80665,
default = "m/s2",
link = "g-force",
},
["km/hs"] = {
Line 47 ⟶ 74:
name2 = "kilometres per hour per second",
name2_us = "kilometers per hour per second",
symbol = "km/(
utype = "acceleration",
scale = 0.
default = "mph/s",
link = "Acceleration",
},
["km/s2"] = {
name1 = "kilometre per second squared",
name1_us = "kilometer per second squared",
name2 = "kilometres per second squared",
name2_us = "kilometers per second squared",
symbol = "km/s<sup>2</sup>",
utype = "acceleration",
scale = 1000,
default = "mph/s",
link = "Acceleration",
Line 102 ⟶ 140:
scale = 4046.8564224,
default = "ha",
subdivs = { ["rood"] = { 4, default = "ha" }, ["sqperch"] = { 160, default = "ha" } },
},
["acre-sing"] = {
},
["arpent"] = {
Line 122 ⟶ 157:
utype = "area",
scale = 3930.395625,
default = "
},
["daa"] = {
Line 161 ⟶ 165:
scale = 1000,
default = "km2 sqmi",
},
["dunam"] = {
Line 184 ⟶ 180:
default = "km2 sqmi",
link = "Dunam",
},
["ha"] = {
Line 215 ⟶ 195:
scale = 10000,
default = "acre",
},
["Irish acre"] = {
Line 265 ⟶ 214:
default = "sqft",
link = "Square metre",
},
["pondemaat"] = {
Line 311 ⟶ 229:
usename = 1,
utype = "area",
scale = 3.
default = "m2",
},
["rai"] = {
name2 = "rai",
symbol = "rai",
utype = "area",
scale = 1600,
default = "m2",
link = "Rai (unit)",
},
["rood"] = {
Line 319 ⟶ 245:
utype = "area",
scale = 1011.7141056,
default = "sqft
subdivs = { ["sqperch"] = { 40, default = "m2" } },
link = "Rood (unit)",
},
Line 360 ⟶ 287:
default = "km2 sqmi",
link = "Nautical mile",
},
["sqperch"] = {
name2 = "perches",
symbol = "perch",
usename = 1,
utype = "area",
scale = 25.29285264,
default = "m2",
link = "Rod (unit)#Area and volume",
},
["sqverst"] = {
Line 381 ⟶ 317:
usename = 1,
utype = "area",
scale = 3.
default = "m2",
link = "Japanese units of measurement#Area",
Line 390 ⟶ 326:
["are"] = {
target = "a",
},
["decare"] = {
target = "daa",
},
["
target = "
},
["ft2"] = {
Line 411 ⟶ 338:
["in2"] = {
target = "sqin",
symbol = "in<sup>2</sup>",
},
["km²"] = {
target = "km2",
},
["mi2"] = {
Line 453 ⟶ 360:
["nmi2"] = {
target = "sqnmi",
},
["pond"] = {
Line 465 ⟶ 366:
["sq arp"] = {
target = "arpent",
},
["sqkm"] = {
Line 500 ⟶ 398:
symbol = "sq ft/acre",
utype = "area per unit area",
scale = 2.
default = "m2/ha",
link = "Basal area",
},
["cent"] = {
name1 = "cent",
symbol = "¢",
utype = "cent",
scale = 1,
default = "cent",
link = "Cent (currency)",
},
["¢"] = {
target = "cent",
},
["A.h"] = {
name1 = "ampere
symbol = "
utype = "charge",
scale = 3600,
Line 525 ⟶ 435:
scale = 1.602176487e-19,
default = "coulomb",
},
["g-mol"] = {
name1 = "gram-mole",
symbol = "g
utype = "chemical amount",
scale = 1,
Line 555 ⟶ 462:
["lb-mol"] = {
name1 = "pound-mole",
symbol = "lb
utype = "chemical amount",
scale = 453.59237,
default = "mol",
},
["lbmol"] = {
Line 567 ⟶ 473:
scale = 453.59237,
default = "mol",
},
["mol"] = {
Line 593 ⟶ 498:
symbol = "lbCO2/US gal",
utype = "co2 per unit volume",
scale = 119.
default = "kgCO2/L",
link = "Exhaust gas",
},
["
per = { "
utype = "
default = "
},
["
per = { "
utype = "
default = "
},
["g/dm3"] = {
Line 745 ⟶ 605:
symbol = "lb/cu ft",
utype = "density",
scale = 16.
default = "g/cm3",
link = "Density",
Line 754 ⟶ 614:
symbol = "lb/cu in",
utype = "density",
scale = 27679.
default = "g/cm3",
link = "Density",
Line 763 ⟶ 623:
symbol = "lb/cu yd",
utype = "density",
scale = 0.
default = "kg/m3",
link = "Density",
Line 772 ⟶ 632:
symbol = "lb/imp gal",
utype = "density",
scale = 99.
default = "kg/L",
link = "Density",
Line 781 ⟶ 641:
symbol = "lb/cu in",
utype = "density",
scale = 27679.
default = "g/cm3",
link = "Density",
Line 790 ⟶ 650:
symbol = "lb/U.S. gal",
utype = "density",
scale = 119.
default = "kg/L",
link = "Density",
Line 799 ⟶ 659:
symbol = "lb/US bu",
utype = "density",
scale = 12.
default = "kg/m3",
link = "Bushel",
Line 808 ⟶ 668:
symbol = "lb/US gal",
utype = "density",
scale = 119.
default = "kg/L",
link = "Density",
Line 817 ⟶ 677:
symbol = "lbm/cu in",
utype = "density",
scale = 27679.
default = "g/cm3",
link = "Density",
Line 837 ⟶ 697:
symbol = "oz/cu in",
utype = "density",
scale = 1729.
default = "g/cm3",
link = "Density",
Line 850 ⟶ 710:
utype = "density",
default = "lb/cuyd",
link = "
},
["Mg/m3"] = {
Line 857 ⟶ 717:
default = "lb/cuft",
},
["
per = { "
utype = "density",
default = "oz/cuin",
},
["μg/dL"] = {
per = { "μg", "dL" },
utype = "density",
default = "lb/cuin",
},
["μg/l"] = {
per = { "μg", "ll" },
utype = "density",
default = "oz/cuin",
},
["lb/ft3"] = {
Line 872 ⟶ 742:
},
["mcg/dL"] = {
target = "
},
["oz/in3"] = {
Line 878 ⟶ 748:
},
["ug/dL"] = {
target = "
},
["
target = "
},
["B.O.T.U."] = {
Line 889 ⟶ 759:
scale = 3600000,
default = "MJ",
link = "
},
["bboe"] = {
Line 1,003 ⟶ 873:
},
["Btu-ISO"] = {
},
["BTU-IT"] = {
Line 1,132 ⟶ 996:
default = "J",
link = "Calorie",
},
["CHU-IT"] = {
Line 1,149 ⟶ 1,004:
scale = 1899.100534716,
default = "kJ",
link = "Conversion of units#Energy",
},
["cufootnaturalgas"] = {
Line 1,177 ⟶ 1,014:
scale = 1055055.85262,
default = "MJ",
link = "Conversion of units#Energy",
},
["cuftnaturalgas"] = {
Line 1,196 ⟶ 1,024:
scale = 1055055.85262,
default = "MJ",
link = "Conversion of units#Energy",
},
["Eh"] = {
Line 1,218 ⟶ 1,037:
utype = "energy",
scale = 0.0000001,
default = "
},
["eV"] = {
Line 1,240 ⟶ 1,059:
scale = 1e44,
default = "YJ",
link = "Foe (unit
},
["ftlb"] = {
name1 = "foot-pound",
symbol = "
utype = "energy",
alttype = "torque",
Line 1,254 ⟶ 1,073:
name1 = "foot-pound force",
name2 = "foot-pounds force",
symbol = "
utype = "energy",
alttype = "torque",
Line 1,264 ⟶ 1,083:
name1 = "foot-pound force",
name2 = "foot-pounds force",
symbol = "
utype = "energy",
alttype = "torque",
Line 1,273 ⟶ 1,092:
["ftpdl"] = {
name1 = "foot-poundal",
symbol = "
utype = "energy",
scale = 0.0421401100938048,
Line 1,285 ⟶ 1,104:
default = "nJ",
link = "Electronvolt",
},
["gTNT"] = {
Line 1,342 ⟶ 1,143:
["GW.h"] = {
name1 = "gigawatt-hour",
symbol = "
utype = "energy",
scale = 3.6e12,
default = "TJ",
link = "
},
["GWh"] = {
Line 1,354 ⟶ 1,155:
scale = 3.6e12,
default = "TJ",
link = "
},
["hph"] = {
name1 = "horsepower-hour",
symbol = "
utype = "energy",
scale = 2684519.537696172792,
default = "kWh",
link = "Horsepower",
},
["inlb"] = {
name1 = "inch-pound",
symbol = "
utype = "energy",
alttype = "torque",
Line 1,384 ⟶ 1,177:
name1 = "inch-pound force",
name2 = "inch-pounds force",
symbol = "
utype = "energy",
alttype = "torque",
Line 1,394 ⟶ 1,187:
name1 = "inch-pound force",
name2 = "inch-pounds force",
symbol = "
utype = "energy",
alttype = "torque",
Line 1,404 ⟶ 1,197:
name1 = "inch-ounce force",
name2 = "inch-ounces force",
symbol = "
utype = "energy",
alttype = "torque",
Line 1,414 ⟶ 1,207:
name1 = "inch-ounce force",
name2 = "inch-ounces force",
symbol = "
utype = "energy",
alttype = "torque",
Line 1,498 ⟶ 1,291:
default = "MJ",
link = "TNT equivalent",
},
["kt(TNT)"] = {
Line 1,555 ⟶ 1,330:
["kW.h"] = {
name1 = "kilowatt-hour",
symbol = "
utype = "energy",
scale = 3600000,
default = "MJ",
},
["kWh"] = {
Line 1,567 ⟶ 1,341:
scale = 3600000,
default = "MJ",
},
["Mcal"] = {
Line 1,832 ⟶ 1,425:
utype = "energy",
scale = 0.0000000001,
default = "
link = "Erg",
},
Line 1,850 ⟶ 1,443:
default = "zJ",
link = "Electronvolt",
},
["MMBtu"] = {
Line 1,893 ⟶ 1,450:
utype = "energy",
scale = 1055055852.62,
default = "GJ",
link = "British thermal unit",
Line 2,096 ⟶ 1,509:
["MW.h"] = {
name1 = "megawatt-hour",
symbol = "
utype = "energy",
scale = 3600000000,
default = "GJ",
link = "
},
["mW.h"] = {
name1 = "milliwatt-hour",
symbol = "
utype = "energy",
scale = 3.6,
default = "J",
link = "
},
["MWh"] = {
Line 2,116 ⟶ 1,529:
scale = 3600000000,
default = "GJ",
link = "
},
["mWh"] = {
Line 2,124 ⟶ 1,537:
scale = 3.6,
default = "J",
link = "
},
["neV"] = {
Line 2,149 ⟶ 1,562:
default = "yJ",
link = "Electronvolt",
},
["PSh"] = {
name1 = "Pferdestärkenstunde",
symbol = "PSh",
utype = "energy",
scale = 2647795.5,
default = "kWh",
},
["quad"] = {
Line 2,157 ⟶ 1,577:
scale = 1.054804e18,
default = "EJ",
link = "Quad (
},
["Ry"] = {
Line 2,166 ⟶ 1,586:
default = "eV",
link = "Rydberg constant",
},
["scf"] = {
Line 2,183 ⟶ 1,594:
scale = 2869.2044809344,
default = "kJ",
},
["scfoot"] = {
Line 2,192 ⟶ 1,602:
scale = 2869.2044809344,
default = "kJ",
},
["t(TNT)"] = {
Line 2,225 ⟶ 1,617:
utype = "energy",
scale = 1.602176487e-7,
default = "
link = "Electronvolt",
},
Line 2,234 ⟶ 1,626:
scale = 4186800,
default = "MJ",
link = "Conversion of units#Energy",
},
["thm-EC"] = {
Line 2,312 ⟶ 1,704:
["TW.h"] = {
name1 = "terawatt-hour",
symbol = "
utype = "energy",
scale = 3.6e15,
default = "PJ",
link = "
},
["TWh"] = {
Line 2,324 ⟶ 1,716:
scale = 3.6e15,
default = "PJ",
link = "
},
["W.h"] = {
name1 = "watt-hour",
symbol = "
utype = "energy",
scale = 3600,
default = "kJ",
link = "Kilowatt-hour",
},
["Wh"] = {
Line 2,357 ⟶ 1,732:
scale = 3600,
default = "kJ",
link = "Kilowatt-hour",
},
["
name1 = "microerg",
symbol = "
utype = "energy",
scale = 1e-13,
Line 2,366 ⟶ 1,742:
link = "Erg",
},
["
name1 = "microelectronvolt",
symbol = "
utype = "energy",
scale = 1.602176487e-25,
Line 2,374 ⟶ 1,750:
link = "Electronvolt",
},
["
name1 = "microwatt-hour",
symbol = "
utype = "energy",
scale = 0.0036,
default = "mJ",
link = "
},
["
name1 = "microwatt-hour",
symbol = "
utype = "energy",
scale = 0.0036,
default = "mJ",
link = "
},
["-kW.h"] = {
Line 2,438 ⟶ 1,778:
["ft.lbf"] = {
target = "ftlbf",
},
["ft·lbf"] = {
Line 2,491 ⟶ 1,828:
},
["hp.h"] = {
target = "hph",
},
Line 2,506 ⟶ 1,840:
},
["in.ozf"] = {
target = "inozf",
},
Line 2,547 ⟶ 1,869:
["MW·h"] = {
target = "MW.h",
},
["TW-h"] = {
target = "TW.h",
},
["
target = "
},
["ueV"] = {
target = "
},
["uW-h"] = {
target = "
},
["uW.h"] = {
target = "
},
["uWh"] = {
target = "
},
["W-h"] = {
target = "W.h",
},
["
_symbol = "eV",
utype = "energy per chemical amount",
scale = 96485.329522144166,
prefixes = 1,
default = "kcal/mol",
link = "Electronvolt",
},
["
utype = "energy per chemical amount",
default = "kJ/mol",
},
["
utype = "energy per chemical amount",
default = "kcal/mol",
link = "Joule per mole",
},
["kWh/100 km"] = {
Line 2,638 ⟶ 1,917:
name2 = "kilowatt-hours per 100 kilometres",
name2_us = "kilowatt-hours per 100 kilometers",
symbol = "
utype = "energy per unit length",
scale = 36,
default = "MJ/km kWh/mi",
link = "
},
["kWh/100 mi"] = {
name1 = "kilowatt-hour per 100 miles",
name2 = "kilowatt-hours per 100 miles",
symbol = "kW⋅h/100 mi",
utype = "energy per unit length",
scale = 22.3694,
default = "mpge",
link = "Miles per gallon gasoline equivalent",
},
["MJ/100 km"] = {
Line 2,649 ⟶ 1,937:
name2 = "megajoules per 100 kilometres",
name2_us = "megajoules per 100 kilometers",
symbol = "MJ/100
utype = "energy per unit length",
scale = 10,
default = "BTU/mi",
link = "British thermal unit",
},
["mpge"] = {
name1 = "mile per gallon gasoline equivalent",
name2 = "miles per gallon gasoline equivalent",
symbol = "mpg‑e",
utype = "energy per unit length",
scale = 1.3263314048360777e-5,
invert = -1,
iscomplex= true,
default = "kWh/100 mi",
link = "Miles per gallon gasoline equivalent",
},
["BTU/mi"] = {
Line 2,679 ⟶ 1,978:
utype = "energy per unit length",
default = "BTU/mi",
},
["mpg-e"] = {
target = "mpge",
},
["BTU/lb"] = {
Line 2,685 ⟶ 1,987:
symbol = "BTU/lb",
utype = "energy per unit mass",
scale =
default = "kJ/kg",
link = "British thermal unit",
Line 2,704 ⟶ 2,006:
scale = 1e9,
default = "ktTNT/t",
link = "
},
["J/g"] = {
Line 2,713 ⟶ 2,015:
scale = 1000,
default = "kcal/g",
link = "
},
["kcal/g"] = {
Line 2,730 ⟶ 2,032:
scale = 1000000,
default = "kcal/g",
link = "
},
["kJ/kg"] = {
Line 2,739 ⟶ 2,041:
scale = 1000,
default = "BTU/lb",
link = "Specific energy",
},
["ktonTNT/MT"] = {
Line 2,783 ⟶ 2,086:
scale = 1e12,
default = "MtTNT/MT",
link = "
},
["Cal/g"] = {
Line 2,821 ⟶ 2,124:
},
["kJ/l"] = {
per = { "kJ", "
utype = "energy per unit volume",
default = "BTU/cuft",
Line 2,829 ⟶ 2,132:
utype = "energy per unit volume",
default = "Cal/USoz",
},
["MJ/m3"] = {
per = { "MJ", "m3" },
utype = "energy per unit volume",
default = "BTU/cuft",
},
["Sv"] = {
_name1 = "sievert",
_symbol = "Sv",
utype = "equivalent radiation dose",
scale = 1,
prefixes = 1,
default = "rem",
link = "Sievert",
},
["rem"] = {
_name1 = "rem",
_symbol = "rem",
utype = "equivalent radiation dose",
scale = 0.01,
prefixes = 1,
default = "Sv",
link = "Roentgen equivalent man",
},
["g/km"] = {
Line 2,846 ⟶ 2,172:
symbol = "g/mi",
utype = "exhaust emission",
scale = 6.
default = "g/km",
link = "Exhaust gas",
Line 2,866 ⟶ 2,192:
symbol = "g(CO<sub>2</sub>)/mi",
utype = "exhaust emission",
scale = 6.
default = "gCO2/km",
link = "Exhaust gas",
Line 2,897 ⟶ 2,223:
symbol = "lb/mi",
utype = "exhaust emission",
scale = 0.
default = "kg/km",
link = "Exhaust gas",
Line 2,906 ⟶ 2,232:
symbol = "lb(CO<sub>2</sub>)/mi",
utype = "exhaust emission",
scale = 0.
default = "kgCO2/km",
link = "Exhaust gas",
Line 2,915 ⟶ 2,241:
symbol = "oz/mi",
utype = "exhaust emission",
scale = 1.
default = "g/km",
link = "Exhaust gas",
Line 2,924 ⟶ 2,250:
symbol = "oz(CO<sub>2</sub>)/mi",
utype = "exhaust emission",
scale = 1.
default = "gCO2/km",
link = "Exhaust gas",
Line 2,933 ⟶ 2,259:
symbol = "cu ft/a",
utype = "flow",
scale = 8.
default = "m3/a",
link = "Cubic foot per second",
Line 2,942 ⟶ 2,268:
symbol = "cu ft/d",
utype = "flow",
scale = 3.
default = "m3/d",
link = "Cubic foot per second",
Line 2,951 ⟶ 2,277:
symbol = "cu ft/h",
utype = "flow",
scale = 7.
default = "m3/h",
link = "Cubic foot per second",
Line 2,960 ⟶ 2,286:
symbol = "cu ft/min",
utype = "flow",
scale = 0.
default = "m3/min",
},
["cuft/s"] = {
Line 2,977 ⟶ 2,302:
symbol = "cu mi/a",
utype = "flow",
scale = 132.
default = "km3/a",
link = "Cubic foot per second",
Line 2,986 ⟶ 2,311:
symbol = "cuyd/h",
utype = "flow",
scale = 0.
default = "m3/h",
link = "Cubic foot per
},
["cuyd/s"] = {
Line 2,995 ⟶ 2,320:
symbol = "cu yd/s",
utype = "flow",
scale = 0.
default = "m3/s",
},
Line 3,003 ⟶ 2,328:
symbol = "Gbbl/a",
utype = "flow",
scale = 5.
default = "v * 1.58987294928 < 10 ! e6 ! e9 ! m3/a",
link = "Barrel per day",
Line 3,012 ⟶ 2,337:
symbol = "imp gal/h",
utype = "flow",
scale = 1.
default = "m3/h",
link = "Gallon",
Line 3,021 ⟶ 2,346:
symbol = "imp gal/min",
utype = "flow",
scale = 7.
default = "m3/s",
link = "Gallon",
Line 3,041 ⟶ 2,366:
symbol = "km<sup>3</sup>/a",
utype = "flow",
scale = 31.
default = "cumi/a",
link = "Cubic metre per second",
},
["km3/d"] = {
name1 = "cubic kilometre per day",
name1_us = "cubic kilometer per day",
name2 = "cubic kilometres per day",
name2_us = "cubic kilometers per day",
symbol = "km<sup>3</sup>/d",
utype = "flow",
scale = 11574.074074074075,
default = "cuft/d",
link = "Cubic metre per second",
},
Line 3,050 ⟶ 2,386:
symbol = "kbbl/a",
utype = "flow",
scale = 5.
default = "v * 1.58987294928 < 10 ! ! e3 ! m3/a",
link = "Barrel per day",
Line 3,059 ⟶ 2,395:
symbol = "kbbl/d",
utype = "flow",
scale = 0.
default = "v * 1.58987294928 < 10 ! ! e3 ! m3/d",
link = "Barrel per day",
Line 3,070 ⟶ 2,406:
symbol = "L/h",
utype = "flow",
scale = 2.
default = "impgal/h USgal/h",
link = "Cubic metre per second",
Line 3,081 ⟶ 2,417:
symbol = "L/min",
utype = "flow",
scale = 1.
default = "impgal/min USgal/min",
link = "Cubic metre per second",
Line 3,103 ⟶ 2,439:
symbol = "m<sup>3</sup>/a",
utype = "flow",
scale = 3.
default = "cuft/a",
link = "Cubic metre per second",
Line 3,114 ⟶ 2,450:
symbol = "m<sup>3</sup>/d",
utype = "flow",
scale = 1.
default = "cuft/d",
link = "Cubic metre per second",
Line 3,125 ⟶ 2,461:
symbol = "m<sup>3</sup>/h",
utype = "flow",
scale = 0.
default = "cuft/h",
link = "Cubic metre per second",
Line 3,136 ⟶ 2,472:
symbol = "m<sup>3</sup>/min",
utype = "flow",
scale = 0.
default = "cuft/min",
link = "Cubic metre per second",
Line 3,155 ⟶ 2,491:
symbol = "Mbbl/a",
utype = "flow",
scale = 0.
default = "v * 1.58987294928 < 10 ! e3 ! e6 ! m3/a",
link = "Barrel per day",
Line 3,164 ⟶ 2,500:
symbol = "Mbbl/d",
utype = "flow",
scale = 1.
default = "v * 1.58987294928 < 10 ! e3 ! e6 ! m3/d",
link = "Barrel per day",
Line 3,173 ⟶ 2,509:
symbol = "bbl/a",
utype = "flow",
scale = 5.
default = "m3/a",
link = "Barrel per day",
Line 3,182 ⟶ 2,518:
symbol = "bbl/d",
utype = "flow",
scale = 1.
default = "m3/d",
},
Line 3,190 ⟶ 2,526:
symbol = "Tbbl/a",
utype = "flow",
scale = 5038.
default = "v * 1.58987294928 < 10 ! e9 ! e12 ! m3/a",
link = "Barrel per day",
Line 3,199 ⟶ 2,535:
symbol = "U.S. gal/d",
utype = "flow",
scale = 4.
default = "m3/s",
customary= 1,
Line 3,208 ⟶ 2,544:
symbol = "gal/h",
utype = "flow",
scale = 1.
default = "m3/h",
link = "Gallon",
Line 3,218 ⟶ 2,554:
symbol = "U.S. gal/min",
utype = "flow",
scale = 6.
default = "m3/s",
link = "Gallon",
Line 3,227 ⟶ 2,563:
symbol = "US gal/a",
utype = "flow",
scale = 1.
default = "m3/s",
},
["USgal/d"] = {
Line 3,236 ⟶ 2,571:
symbol = "US gal/d",
utype = "flow",
scale = 4.
default = "m3/s",
},
Line 3,244 ⟶ 2,579:
symbol = "gal/h",
utype = "flow",
scale = 1.
default = "m3/h",
link = "Gallon",
Line 3,254 ⟶ 2,589:
symbol = "US gal/min",
utype = "flow",
scale = 6.
default = "m3/s",
link = "Gallon",
Line 3,367 ⟶ 2,702:
utype = "force",
scale = 0.0006354602307515,
default = "
link = "Pound
},
["grf"] = {
Line 3,376 ⟶ 2,711:
utype = "force",
scale = 0.0006354602307515,
default = "
link = "Pound
},
["kdyn"] = {
Line 3,434 ⟶ 2,769:
scale = 4.4482216152605,
default = "N",
link = "Pound (force)",
},
["lbf"] = {
Line 3,442 ⟶ 2,778:
scale = 4.4482216152605,
default = "N",
link = "Pound (force)",
},
["lb(f)"] = {
name1 = "pound",
symbol = "lb",
utype = "force",
scale = 4.4482216152605,
default = "N",
link = "Pound (force)",
},
["LT-f"] = {
Line 3,482 ⟶ 2,827:
utype = "force",
scale = 0.00000980665,
default = "
link = "Kilogram-force",
},
Line 3,491 ⟶ 2,836:
utype = "force",
scale = 0.00000980665,
default = "
link = "Kilogram-force",
},
Line 3,507 ⟶ 2,852:
utype = "force",
scale = 0.00000980665,
default = "
link = "Kilogram-force",
},
Line 3,526 ⟶ 2,871:
scale = 0.2780138203095378125,
default = "mN",
link = "Pound
},
["ozf"] = {
Line 3,535 ⟶ 2,880:
scale = 0.2780138203095378125,
default = "mN",
link = "Pound
},
["p"] = {
Line 3,620 ⟶ 2,965:
invert = 1,
iscomplex= true,
default = "
},
["km/L"] = {
Line 3,630 ⟶ 2,975:
},
["km/l"] = {
per = { "km", "
utype = "fuel efficiency",
invert = -1,
Line 3,642 ⟶ 2,987:
iscomplex= true,
default = "mpgimp mpgus",
symlink = "[[Fuel economy in automobiles#Units of measure|L/100
},
["l/100 km"] = {
per = { "
utype = "fuel efficiency",
invert = 1,
iscomplex= true,
default = "mpgimp mpgus",
symlink = "[[Fuel economy in automobiles#Units of measure|l/100
},
["L/km"] = {
Line 3,660 ⟶ 3,005:
},
["l/km"] = {
per = { "
utype = "fuel efficiency",
invert = 1,
Line 3,696 ⟶ 3,041:
["mpgimp"] = {
per = { "mi", "@impgal" },
symbol = "mpg<sub>
utype = "fuel efficiency",
invert = -1,
iscomplex= true,
default = "L/100 km
symlink = "[[Fuel economy in automobiles#Units of measure|mpg]]<sub>
},
["mpgus"] = {
per = { "mi", "+USgal" },
symbol = "mpg<sub>
utype = "fuel efficiency",
invert = -1,
iscomplex= true,
default = "L/100 km
symlink = "[[Fuel economy in automobiles#Units of measure|mpg]]<sub>
},
["U.S.gal/mi"] = {
Line 3,718 ⟶ 3,063:
invert = 1,
iscomplex= true,
default = "
},
["usgal/mi"] = {
Line 3,725 ⟶ 3,070:
invert = 1,
iscomplex= true,
default = "
},
["L/100km"] = {
Line 3,732 ⟶ 3,077:
["l/100km"] = {
target = "l/100 km",
},
["mpg"] = {
Line 3,741 ⟶ 3,083:
["mpgU.S."] = {
target = "mpgus",
symbol = "mpg<sub>
sp_us = true,
symlink = "[[Fuel economy in automobiles#Units of measure|mpg]]<sub>
},
["mpgu.s."] = {
target = "mpgus",
symbol = "mpg<sub>
sp_us = true,
symlink = "[[Fuel economy in automobiles#Units of measure|mpg]]<sub>
},
["mpgUS"] = {
Line 3,783 ⟶ 3,125:
symbol = "ft/mi",
utype = "gradient",
scale = 0.
default = "v < 5.28 ! c ! ! m/km",
link = "Grade (slope)",
Line 3,792 ⟶ 3,134:
symbol = "ft/nmi",
utype = "gradient",
scale = 0.
default = "v < 6.076 ! c ! ! m/km",
link = "Grade (slope)",
Line 3,801 ⟶ 3,143:
symbol = "in/ft",
utype = "gradient",
scale = 0.
default = "mm/m",
link = "Grade (slope)",
Line 3,810 ⟶ 3,152:
symbol = "in/mi",
utype = "gradient",
scale = 1.
default = "v < 0.6336 ! m ! c ! m/km",
link = "Grade (slope)",
Line 3,875 ⟶ 3,217:
usename = 1,
utype = "length",
scale = 0.
default = "mm",
link = "Japanese units of measurement#Length",
Line 3,887 ⟶ 3,229:
subdivs = { ["ft"] = { 66, default = "m" }, ["yd"] = { 22, default = "m" } },
link = "Chain (unit)",
},
["chlk"] = {
name1 = "[[Chain (unit)|chain]]",
symbol = "[[Chain (unit)|ch]]",
utype = "length",
scale = 20.1168,
default = "ft m",
link = "",
},
["chain"] = {
Line 3,896 ⟶ 3,246:
subdivs = { ["ft"] = { 66, default = "m" }, ["yd"] = { 22, default = "m" } },
link = "Chain (unit)",
},
["chainlk"] = {
symbol = "[[Chain (unit)|chain]]",
usename = 1,
utype = "length",
scale = 20.1168,
default = "ft m",
link = "",
},
["dpcm"] = {
name2 = "dot/cm",
symbol = "dot/cm",
utype = "length",
scale = 100,
invert = -1,
iscomplex= true,
default = "dpi",
link = "Dots per inch",
},
["dpi"] = {
name2 = "DPI",
symbol = "DPI",
utype = "length",
scale = 39.370078740157481,
invert = -1,
iscomplex= true,
default = "pitch",
link = "Dots per inch",
},
["fathom"] = {
Line 3,938 ⟶ 3,316:
scale = 9.4607304725808e24,
default = "Mpc",
link = "Light-year#
},
["Gpc"] = {
Line 3,955 ⟶ 3,333:
scale = 0.1016,
iscomplex= true,
default = "in cm",
link = "Hand (unit)",
},
["in"] = {
Line 3,991 ⟶ 3,359:
scale = 9.4607304725808e18,
default = "pc",
link = "Light-year#
},
["kpc"] = {
Line 4,011 ⟶ 3,379:
["league"] = {
symbol = "league",
usename = 1,
utype = "length",
scale = 4828.032,
Line 4,039 ⟶ 3,408:
scale = 1609.344,
default = "km",
subdivs = { ["ch"] = { 80, default = "km" }, ["chlk"] = { 80, default = "km" }, ["chain"] = { 80, default = "km" }, ["chainlk"] = { 80, default = "km" }, ["ft"] = { 5280, default = "km" }, ["furlong"] = { 8, default = "km" }, ["yd"] = { 1760, default = "km" } },
},
["mil"] = {
Line 4,047 ⟶ 3,416:
scale = 0.0000254,
default = "mm",
link = "
},
["Mly"] = {
Line 4,055 ⟶ 3,424:
scale = 9.4607304725808e21,
default = "kpc",
link = "Light-year#
},
["Mpc"] = {
Line 4,108 ⟶ 3,477:
default = "ft m",
link = "Rod (unit)",
},
["pitch"] = {
name2 = "μm",
symbol = "μm",
utype = "length",
scale = 1e-6,
default = "dpi",
defkey = "pitch",
linkey = "pitch",
link = "Dots per inch",
},
["pole"] = {
Line 4,119 ⟶ 3,498:
["pre1954U.S.nmi"] = {
name1 = "(pre-1954 U.S.) nautical mile",
symbol = "(pre
utype = "length",
scale = 1853.24496,
Line 4,128 ⟶ 3,507:
name1 = "(pre-1954 US) nautical mile",
name1_us = "(pre-1954 U.S.) nautical mile",
symbol = "(pre
sym_us = "(pre
utype = "length",
scale = 1853.24496,
Line 4,172 ⟶ 3,551:
usename = 1,
utype = "length",
scale = 0.
default = "m",
link = "
},
["sm"] = {
Line 4,191 ⟶ 3,570:
default = "km",
subdivs = { ["chain"] = { 80, default = "km" } },
},
["solar radius"] = {
name1 = "solar radius",
name2 = "solar radii",
symbol = "''R''<sub>☉</sub>",
utype = "length",
scale = 695700e3,
default = "km",
},
["sun"] = {
Line 4,197 ⟶ 3,584:
usename = 1,
utype = "length",
scale = 0.
default = "mm",
link = "Japanese units of measurement#Length",
Line 4,208 ⟶ 3,595:
scale = 0.0000254,
default = "mm",
link = "
},
["verst"] = {
Line 4,225 ⟶ 3,612:
subdivs = { ["ft"] = { 3, default = "m" } },
},
["
name1 = "microinch",
name2 = "microinches",
symbol = "
utype = "length",
scale = 0.0000000254,
default = "nm",
link = "SI prefix#Non-
},
["Å"] = {
Line 4,240 ⟶ 3,627:
scale = 0.0000000001,
default = "in",
["Hz"] = {
_name1 = "hertz",
_name2 = "hertz",
_symbol = "Hz",
utype = "length",
scale = 3.3356409519815204e-9,
invert = -1,
iscomplex= true,
prefixes = 1,
default = "m",
link = "Hertz",
},
["rpm"] = {
name1 = "revolution per minute",
name2 = "revolutions per minute",
symbol = "rpm",
utype = "length",
scale = 5.5594015866358675e-11,
invert = -1,
iscomplex= true,
default = "Hz",
link = "Revolutions per minute",
},
["-ft-frac"] = {
Line 4,260 ⟶ 3,669:
["100km"] = {
target = "km",
multiplier= 100,
},
["100mi"] = {
target = "mi",
multiplier= 100,
},
["100miles"] = {
target = "mi",
symbol = "miles",
multiplier= 100,
},
Line 4,267 ⟶ 3,685:
["angstrom"] = {
target = "Å",
},
["au"] = {
target = "AU",
symbol = "au",
},
["feet"] = {
},
["hands"] = {
Line 4,275 ⟶ 3,697:
},
["inch"] = {
target = "in",
},
["inches"] = {
target = "in",
},
["light-year"] = {
target = "ly",
},
["meter"] = {
target = "m",
sp_us = true,
},
["meters"] = {
target = "m",
sp_us = true,
},
["metre"] = {
target = "m",
},
["metres"] = {
target = "m",
},
["micrometre"] = {
target = "
},
["micron"] = {
target = "μm",
default = "μin",
},
["mile"] = {
target = "mi",
usename = 1,
},
["miles"] = {
target = "mi",
usename = 1,
},
["parsec"] = {
Line 4,314 ⟶ 3,744:
},
["uin"] = {
target = "
},
["yard"] = {
Line 4,324 ⟶ 3,754:
["yds"] = {
target = "yd",
},
["dtex"] = {
Line 4,335 ⟶ 3,762:
scale = 1e-7,
default = "lb/yd",
link = "Units of textile measurement#
},
["kg/cm"] = {
Line 4,364 ⟶ 3,791:
symbol = "lb/ft",
utype = "linear density",
scale = 1.
default = "kg/m",
link = "Linear density",
Line 4,373 ⟶ 3,800:
symbol = "lb/yd",
utype = "linear density",
scale = 0.
default = "kg/m",
link = "Linear density",
},
["G"] = {
utype = "magnetic field strength",
scale = 0.0001,
prefixes = 1,
default = "T",
link = "Gauss (unit)",
Line 4,395 ⟶ 3,823:
link = "Tesla (unit)",
},
["
name1 = "ampere per metre",
name1_us = "ampere per meter",
name2 = "amperes per metre",
name2_us = "amperes per meter",
symbol = "A/m",
utype = "magnetizing field",
scale = 1,
default = "Oe",
},
["kA/m"] = {
name1 = "kiloampere per metre",
name1_us = "kiloampere per meter",
name2 = "kiloamperes per metre",
name2_us = "kiloamperes per meter",
symbol = "kA/m",
utype = "magnetizing field",
scale = 1000,
default = "kOe",
link = "Ampere per metre",
},
["MA/m"] = {
name1 = "megaampere per metre",
name1_us = "megaampere per meter",
name2 = "megaamperes per metre",
name2_us = "megaamperes per meter",
symbol = "MA/m",
utype = "magnetizing field",
scale = 1e6,
default = "kOe",
link = "Ampere per metre",
},
["Oe"] = {
_name1 = "oersted",
_symbol = "Oe",
utype = "magnetizing field",
scale = 79.5774715,
prefixes = 1,
default = "kA/m",
link = "Oersted",
},
["-Lcwt"] = {
name1 = "hundredweight",
utype = "mass",
scale = 50.80234544,
default = "lb",
},
["
name1 = "hundredweight",
utype = "mass",
scale = 45.359237,
Line 4,452 ⟶ 3,905:
},
["dram"] = {
},
["dwt"] = {
Line 4,473 ⟶ 3,920:
scale = 1016.0469088,
default = "DWtonne",
link = "
},
["DWtonne"] = {
name1_us = "deadweight metric ton",
symbol = "deadweight tonne",
sym_us = "~deadweight metric ton",
usename = 1,
utype = "mass",
scale = 1000,
default = "DWton",
link = "
},
["g"] = {
Line 4,513 ⟶ 3,962:
symbol = "imp gal H<sub>2</sub>O",
utype = "mass",
scale = 4.
default = "lb kg",
link = "Imperial gallon",
Line 4,530 ⟶ 3,979:
utype = "mass",
scale = 0.45359237,
exception= "integer_more_precision",
default = "kg",
subdivs = { ["oz"] = { 16, default = "kg" } },
Line 4,536 ⟶ 3,986:
["Lcwt"] = {
name1 = "long hundredweight",
name2 = "long hundredweight",
symbol = "Lcwt",
usename = 1,
Line 4,541 ⟶ 3,992:
scale = 50.80234544,
default = "lb",
subdivs = { ["qtr"] = { 4, default = "kg
link = "Hundredweight",
},
["long cwt"] = {
name1 = "long hundredweight",
name2 = "long hundredweight",
symbol = "long cwt",
utype = "mass",
scale = 50.80234544,
default = "lb kg",
subdivs = { ["qtr"] = { 4, default = "kg" } },
link = "Hundredweight",
},
Line 4,558 ⟶ 4,011:
scale = 12.70058636,
default = "lb kg",
},
["LT"] = {
Line 4,573 ⟶ 4,018:
scale = 1016.0469088,
default = "t",
subdivs = { ["Lcwt"] = { 20, default = "t", unit = "
},
["lt"] = {
Line 4,581 ⟶ 4,026:
scale = 1016.0469088,
default = "t",
subdivs = { ["Lcwt"] = { 20, default = "t", unit = "-Lcwt" } },
},
["metric ton"] = {
Line 4,635 ⟶ 4,081:
default = "lb kg",
subdivs = { ["lb"] = { 28, default = "kg" } },
link = "
},
["Scwt"] = {
Line 4,645 ⟶ 4,091:
scale = 45.359237,
default = "lb",
link = "Hundredweight",
},
["short cwt"] = {
name1 = "short hundredweight",
name2 = "short hundredweight",
symbol = "short cwt",
utype = "mass",
Line 4,660 ⟶ 4,108:
scale = 11.33980925,
default = "lb kg",
},
["
symbol = "short ton",
usename = 1,
Line 4,668 ⟶ 4,115:
scale = 907.18474,
default = "t",
subdivs = { ["Scwt"] = { 20, default = "t", unit = "-Scwt" } },
},
["shtn"] = {
Line 4,686 ⟶ 4,134:
name1 = "solar mass",
name2 = "solar masses",
symbol = "''M''<sub>☉</sub>",
utype = "mass",
scale = 1.98855e30,
default = "kg",
},
["st"] = {
Line 4,740 ⟶ 4,180:
symbol = "US gal H<sub>2</sub>O",
utype = "mass",
scale = 3.
default = "lb kg",
link = "United States customary units#Fluid volume",
Line 4,750 ⟶ 4,190:
scale = 1.632932532,
default = "kg",
link = "
},
["billion tonne"] = {
Line 4,756 ⟶ 4,196:
},
["kilogram"] = {
},
["kilotonne"] = {
Line 4,769 ⟶ 4,209:
["lcwt"] = {
target = "Lcwt",
},
["long ton"] = {
target = "LT",
},
["mcg"] = {
target = "
},
["million tonne"] = {
Line 4,778 ⟶ 4,221:
["scwt"] = {
target = "Scwt",
},
["short ton"] = {
target = "ST",
},
["stone"] = {
Line 4,802 ⟶ 4,248:
symbol = "lb/hp",
utype = "mass per unit power",
scale = 0.
default = "kg/kW",
link = "Horsepower",
Line 4,819 ⟶ 4,265:
name1 = "gram-mole per day",
name2 = "gram-moles per day",
symbol = "g
utype = "molar rate",
scale = 1.
default = "
link = "Mole (unit)",
},
Line 4,828 ⟶ 4,274:
name1 = "gram-mole per hour",
name2 = "gram-moles per hour",
symbol = "g
utype = "molar rate",
scale = 0.
default = "mmol/s",
link = "Mole (unit)",
Line 4,837 ⟶ 4,283:
name1 = "gram-mole per minute",
name2 = "gram-moles per minute",
symbol = "g
utype = "molar rate",
scale = 0.
default = "g-mol/s",
link = "Mole (unit)",
Line 4,846 ⟶ 4,292:
name1 = "gram-mole per second",
name2 = "gram-moles per second",
symbol = "g
utype = "molar rate",
scale = 1,
Line 4,857 ⟶ 4,303:
symbol = "gmol/d",
utype = "molar rate",
scale = 1.
default = "
link = "Mole (unit)",
},
Line 4,866 ⟶ 4,312:
symbol = "gmol/h",
utype = "molar rate",
scale = 0.
default = "mmol/s",
link = "Mole (unit)",
Line 4,875 ⟶ 4,321:
symbol = "gmol/min",
utype = "molar rate",
scale = 0.
default = "gmol/s",
link = "Mole (unit)",
Line 4,893 ⟶ 4,339:
symbol = "kmol/d",
utype = "molar rate",
scale = 0.
default = "mmol/s",
link = "Mole (unit)",
Line 4,902 ⟶ 4,348:
symbol = "kmol/h",
utype = "molar rate",
scale = 0.
default = "mol/s",
link = "Mole (unit)",
Line 4,911 ⟶ 4,357:
symbol = "kmol/min",
utype = "molar rate",
scale = 16.
default = "mol/s",
link = "Kilomole (unit)",
Line 4,927 ⟶ 4,373:
name1 = "pound-mole per day",
name2 = "pound-moles per day",
symbol = "lb
utype = "molar rate",
scale = 0.
default = "mmol/s",
link = "
},
["lb-mol/h"] = {
name1 = "pound-mole per hour",
name2 = "pound-moles per hour",
symbol = "lb
utype = "molar rate",
scale = 0.
default = "mol/s",
link = "
},
["lb-mol/min"] = {
name1 = "pound-mole per minute",
name2 = "pound-moles per minute",
symbol = "lb
utype = "molar rate",
scale = 7.
default = "mol/s",
link = "
},
["lb-mol/s"] = {
name1 = "pound-mole per second",
name2 = "pound-moles per second",
symbol = "lb
utype = "molar rate",
scale = 453.59237,
default = "kmol/s",
link = "
},
["lbmol/d"] = {
Line 4,965 ⟶ 4,411:
symbol = "lbmol/d",
utype = "molar rate",
scale = 0.
default = "mmol/s",
link = "
},
["lbmol/h"] = {
Line 4,974 ⟶ 4,420:
symbol = "lbmol/h",
utype = "molar rate",
scale = 0.
default = "mol/s",
link = "
},
["lbmol/min"] = {
Line 4,983 ⟶ 4,429:
symbol = "lbmol/min",
utype = "molar rate",
scale = 7.
default = "mol/s",
link = "
},
["lbmol/s"] = {
Line 4,994 ⟶ 4,440:
scale = 453.59237,
default = "kmol/s",
link = "
},
["mmol/s"] = {
Line 5,010 ⟶ 4,456:
symbol = "mol/d",
utype = "molar rate",
scale = 1.
default = "
link = "Mole (unit)",
},
Line 5,019 ⟶ 4,465:
symbol = "mol/h",
utype = "molar rate",
scale = 0.
default = "mmol/s",
link = "Mole (unit)",
Line 5,028 ⟶ 4,474:
symbol = "mol/min",
utype = "molar rate",
scale = 0.
default = "mol/s",
link = "Mole (unit)",
Line 5,041 ⟶ 4,487:
link = "Mole (unit)",
},
["
name1 = "micromole per second",
name2 = "micromoles per second",
symbol = "
utype = "molar rate",
scale = 0.000001,
Line 5,051 ⟶ 4,497:
},
["umol/s"] = {
target = "
},
["/acre"] = {
Line 5,060 ⟶ 4,503:
name2 = "per acre",
symbol = "/acre",
utype = "per unit area",
scale =
default = "/ha",
link = "Acre",
Line 5,071 ⟶ 4,513:
symbol = "/ha",
utype = "per unit area",
scale =
default = "/acre",
link = "Hectare",
Line 5,082 ⟶ 4,524:
symbol = "/cm<sup>2</sup>",
utype = "per unit area",
scale =
default = "/sqin",
link = "Square centimetre",
Line 5,091 ⟶ 4,533:
symbol = "/in<sup>2</sup>",
utype = "per unit area",
scale =
default = "/sqcm",
link = "Square inch",
Line 5,102 ⟶ 4,544:
symbol = "/km<sup>2</sup>",
utype = "per unit area",
scale =
default = "/sqmi",
link = "Square kilometre",
Line 5,111 ⟶ 4,553:
symbol = "/sq mi",
utype = "per unit area",
scale =
default = "/sqkm",
link = "Square mile",
},
["PD/acre"] = {
name1 = "
name2 = "inhabitants per acre",
symbol = "/acre",
utype = "per unit area",
scale =
default = "PD/ha",
link = "Acre",
},
["PD/ha"] = {
name1 = "
name2 = "inhabitants per hectare",
symbol = "/ha",
utype = "per unit area",
scale =
default = "PD/acre",
link = "Hectare",
},
["PD/sqkm"] = {
name1 = "
name1_us = "
name2 = "inhabitants per square kilometre",
name2_us = "inhabitants per square kilometer",
symbol = "/km<sup>2</sup>",
utype = "per unit area",
scale =
default = "PD/sqmi",
link = "Square kilometre",
},
["PD/sqmi"] = {
name1 = "
name2 = "inhabitants per square mile",
symbol = "/sq mi",
utype = "per unit area",
scale =
default = "PD/sqkm",
link = "Square mile",
Line 5,190 ⟶ 4,631:
name2_us = "per liter",
symbol = "/l",
utype = "per unit volume",
scale = 1000,
default = "/usgal",
link = "Litre",
},
["/L"] = {
name1 = "per litre",
name1_us = "per liter",
name2 = "per litre",
name2_us = "per liter",
symbol = "/L",
utype = "per unit volume",
scale = 1000,
Line 5,201 ⟶ 4,653:
utype = "per unit volume",
scale = 264.172052,
default = "/
link = "US gallon",
customary= 2,
Line 5,222 ⟶ 4,674:
symbol = "Cal/d",
utype = "power",
scale = 0.
default = "kJ/d",
link = "Calorie",
},
["Cal/h"] = {
name1 = "large calorie per hour",
name2 = "large calories per hour",
symbol = "Cal/h",
utype = "power",
scale = 1.
default = "kJ/h",
link = "Calorie",
Line 5,240 ⟶ 4,692:
symbol = "cal/h",
utype = "power",
scale = 0.
default = "W",
link = "Calorie",
Line 5,275 ⟶ 4,727:
scale = 746,
default = "kW",
link = "Horsepower#Electrical horsepower",
},
["hp-electrical"] = {
Line 5,283 ⟶ 4,736:
scale = 746,
default = "kW",
link = "Horsepower#Electrical horsepower",
},
["hp-metric"] = {
Line 5,306 ⟶ 4,760:
symbol = "kcal/h",
utype = "power",
scale = 1.
default = "kW",
link = "Calorie",
Line 5,315 ⟶ 4,769:
symbol = "kJ/d",
utype = "power",
scale = 0.
default = "Cal/d",
link = "Kilojoule",
Line 5,324 ⟶ 4,778:
symbol = "kJ/h",
utype = "power",
scale = 0.
default = "W",
link = "Kilojoule",
Line 5,387 ⟶ 4,841:
["whp"] = {
target = "hp",
},
["hp/lb"] = {
name1 = "horsepower per pound",
name2 = "horsepower per pound",
symbol = "hp/lb",
utype = "power per unit mass",
scale = 1643.986806,
default = "kW/kg",
link = "Power-to-weight ratio",
},
["hp/LT"] = {
name1 = "horsepower per long ton",
name2 = "horsepower per long ton",
symbol = "hp/LT",
utype = "power per unit mass",
scale = 0.
default = "kW/t",
link = "Power-to-weight ratio",
Line 5,398 ⟶ 4,862:
["hp/ST"] = {
name1 = "horsepower per short ton",
name2 = "horsepower per short ton",
symbol = "hp/ST",
utype = "power per unit mass",
scale = 0.821993403,
default = "kW/t",
link = "Power-to-weight ratio",
},
["hp/t"] = {
name1 = "horsepower per tonne",
name2 = "horsepower per tonne",
symbol = "hp/t",
utype = "power per unit mass",
scale = 0.74569987158227022,
default = "kW/t",
link = "Power-to-weight ratio",
},
["kW/kg"] = {
name1 = "kilowatt per kilogram",
name2 = "kilowatts per kilogram",
symbol = "kW/kg",
utype = "power per unit mass",
scale = 1000,
default = "hp/lb",
link = "Power-to-weight ratio",
},
["kW/t"] = {
name1 = "kilowatt per tonne",
name2 = "kilowatts per tonne",
symbol = "kW/t",
utype = "power per unit mass",
Line 5,414 ⟶ 4,898:
["PS/t"] = {
name1 = "metric horsepower per tonne",
name2 = "metric horsepower per tonne",
symbol = "PS/t",
utype = "power per unit mass",
Line 5,419 ⟶ 4,904:
default = "kW/t",
link = "Power-to-weight ratio",
},
["shp/lb"] = {
name1 = "shaft horsepower per pound",
name2 = "shaft horsepower per pound",
symbol = "shp/lb",
utype = "power per unit mass",
scale = 1643.986806,
default = "kW/kg",
link = "Power-to-weight ratio",
},
["hp/tonne"] = {
target = "hp/t",
symbol = "hp/tonne",
default = "kW/tonne",
},
["kW/tonne"] = {
target = "kW/t",
symbol = "kW/tonne",
},
["-lb/in2"] = {
Line 5,425 ⟶ 4,928:
symbol = "lb/in<sup>2</sup>",
utype = "pressure",
scale = 6894.
default = "kPa kgf/cm2",
},
["atm"] = {
Line 5,513 ⟶ 5,015:
symbol = "ksi",
utype = "pressure",
scale = 6894757.
default = "MPa",
link = "
},
["lbf/in2"] = {
Line 5,522 ⟶ 5,024:
symbol = "lbf/in<sup>2</sup>",
utype = "pressure",
scale = 6894.
default = "kPa kgf/cm2",
},
["mb"] = {
Line 5,551 ⟶ 5,052:
scale = 133.322387415,
default = "kPa",
},
["Pa"] = {
Line 5,567 ⟶ 5,067:
symbol = "psf",
utype = "pressure",
scale = 47.
default = "kPa",
link = "
},
["psi"] = {
Line 5,576 ⟶ 5,076:
symbol = "psi",
utype = "pressure",
scale = 6894.
default = "kPa",
},
["Torr"] = {
Line 5,584 ⟶ 5,083:
symbol = "Torr",
utype = "pressure",
scale = 133.
default = "kPa",
},
Line 5,607 ⟶ 5,106:
utype = "pressure",
default = "lb/sqft",
multiplier= 9.80665,
},
["kg/ha"] = {
per = { "kg", "ha" },
utype = "pressure",
default = "lb/acre",
multiplier= 9.80665,
},
Line 5,619 ⟶ 5,124:
utype = "pressure",
default = "g/m2",
multiplier= 9.80665,
},
["lb/acre"] = {
per = { "lb", "acre" },
utype = "pressure",
default = "kg/ha",
multiplier= 9.80665,
},
Line 5,642 ⟶ 5,153:
per = { "MT", "ha" },
utype = "pressure",
default = "LT/acre ST/acre",
multiplier= 9.80665,
},
Line 5,666 ⟶ 5,177:
per = { "t", "ha" },
utype = "pressure",
default = "LT/acre ST/acre",
multiplier= 9.80665,
},
["tonne/acre"] = {
per = { "tonne", "acre" },
utype = "pressure",
default = "tonne/ha",
multiplier= 9.80665,
},
["tonne/ha"] = {
per = { "tonne", "ha" },
utype = "pressure",
default = "tonne/acre",
multiplier= 9.80665,
},
Line 5,700 ⟶ 5,223:
prefixes = 1,
default = "GBq",
link = "Curie (unit)",
},
["Rd"] = {
_name1 = "rutherford",
_symbol = "Rd",
utype = "radioactivity",
scale = 1e6,
prefixes = 1,
default = "MBq",
link = "Rutherford (unit)",
},
["cm/h"] = {
Line 5,709 ⟶ 5,241:
symbol = "cm/h",
utype = "speed",
scale = 2.
default = "in/h",
link = "Metre per second",
Line 5,731 ⟶ 5,263:
symbol = "cm/year",
utype = "speed",
scale = 3.
default = "in/year",
link = "Orders of magnitude (speed)",
Line 5,742 ⟶ 5,274:
scale = 0.3048,
default = "m/s",
},
["ft/min"] = {
Line 5,767 ⟶ 5,298:
usename = 1,
utype = "speed",
scale = 0.
default = "km/h mph",
link = "FFF
},
["in/h"] = {
Line 5,776 ⟶ 5,307:
symbol = "in/h",
utype = "speed",
scale = 7.
default = "cm/h",
link = "Inch",
Line 5,794 ⟶ 5,325:
symbol = "in/year",
utype = "speed",
scale = 8.
default = "cm/year",
link = "Orders of magnitude (speed)",
},
["isp"] = {
name1 = "second",
symbol = "s",
utype = "speed",
scale = 9.80665,
default = "km/s",
link = "Specific impulse",
},
["km/d"] = {
name1 = "kilometre per day",
name1_us = "kilometer per day",
name2 = "kilometres per day",
name2_us = "kilometers per day",
symbol = "km/d",
utype = "speed",
scale = 1.1574074074074074e-2,
default = "mi/d",
link = "Orders of magnitude (speed)",
},
Line 5,805 ⟶ 5,355:
symbol = "km/h",
utype = "speed",
scale = 0.
default = "mph",
link = "Kilometres per hour",
Line 5,824 ⟶ 5,374:
symbol = "kn",
utype = "speed",
scale = 0.
default = "km/h mph",
link = "Knot (unit)",
},
["kNs/kg"] = {
name2 = "kN‑s/kg",
symbol = "kN‑s/kg",
utype = "speed",
scale = 1000,
default = "isp",
link = "Specific impulse",
},
["m/min"] = {
Line 5,835 ⟶ 5,393:
symbol = "m/min",
utype = "speed",
scale = 0.
default = "ft/min",
link = "Metre per second",
Line 5,856 ⟶ 5,414:
scale = 0,
iscomplex= true,
default = "
link = "Mach number",
},
["mi/d"] = {
name1 = "mile per day",
name2 = "miles per day",
symbol = "mi/d",
utype = "speed",
scale = 1.8626666666666667e-2,
default = "km/d",
link = "Orders of magnitude (speed)",
},
["mi/s"] = {
Line 5,875 ⟶ 5,442:
symbol = "mm/h",
utype = "speed",
scale = 2.
default = "in/h",
link = "Metre per second",
Line 5,887 ⟶ 5,454:
default = "km/h",
link = "Miles per hour",
},
["Ns/kg"] = {
name2 = "N‑s/kg",
symbol = "N‑s/kg",
utype = "speed",
scale = 1,
default = "isp",
link = "Specific impulse",
},
["si tsfc"] = {
name2 = "g/(kN⋅s)",
symbol = "g/(kN⋅s)",
utype = "speed",
scale = 9.9999628621379242e-7,
invert = -1,
iscomplex= true,
default = "tsfc",
link = "Thrust specific fuel consumption",
},
["tsfc"] = {
name2 = "lb/(lbf⋅h)",
symbol = "lb/(lbf⋅h)",
utype = "speed",
scale = 2.832545036049801e-5,
invert = -1,
iscomplex= true,
default = "si tsfc",
link = "Thrust specific fuel consumption",
},
["cm/y"] = {
Line 5,916 ⟶ 5,511:
utype = "speed",
default = "in/s",
link = "
},
["C"] = {
Line 5,937 ⟶ 5,532:
usesymbol= 1,
utype = "temperature",
scale = 0.
offset = 32-273.15*(9/5),
iscomplex= true,
Line 5,945 ⟶ 5,540:
},
["K"] = {
usesymbol= 1,
utype = "temperature",
Line 5,953 ⟶ 5,548:
iscomplex= true,
istemperature= true,
prefixes = 1,
default = "C F",
link = "Kelvin",
},
["keVT"] = {
Line 5,964 ⟶ 5,561:
default = "MK",
link = "Electronvolt",
},
["R"] = {
Line 5,981 ⟶ 5,568:
usesymbol= 1,
utype = "temperature",
scale = 0.
offset = 0,
iscomplex= true,
Line 6,016 ⟶ 5,603:
usesymbol= 1,
utype = "temperature change",
scale = 0.
default = "C-change",
link = "Fahrenheit",
Line 6,035 ⟶ 5,622:
["°F-change"] = {
target = "F-change",
},
["century"] = {
Line 6,082 ⟶ 5,651:
scale = 220903200,
default = "years",
link = "List of unusual units of measurement#Dog year",
},
["fortnight"] = {
Line 6,159 ⟶ 5,729:
scale = 1,
prefixes = 1,
default = "v < 7200 ! min ! h",
link = "Second",
},
Line 6,259 ⟶ 5,829:
["myr"] = {
target = "million year",
},
["sec"] = {
target = "s",
},
["second"] = {
Line 6,287 ⟶ 5,860:
name1 = "kilogram metre",
name1_us = "kilogram meter",
symbol = "
utype = "torque",
scale = 9.80665,
default = "Nm lbft",
link = "Kilogram metre (torque)",
},
["kgf.m"] = {
name1 = "kilogram force-metre",
name1_us = "kilogram force-meter",
symbol = "
utype = "torque",
scale = 9.80665,
default = "Nm lbfft",
link = "Kilogram metre (torque)",
},
["kgm"] = {
name1 = "kilogram metre",
name1_us = "kilogram meter",
symbol = "
utype = "torque",
scale = 9.80665,
default = "Nm lbfft",
link = "Kilogram metre (torque)",
},
["kpm"] = {
name1 = "kilopond metre",
name1_us = "kilopond meter",
symbol = "kp⋅m",
utype = "torque",
scale = 9.80665,
default = "Nm lbft",
link = "Kilogram metre (torque)",
},
["lb-fft"] = {
name1 = "pound force-foot",
name2 = "pound force-feet",
symbol = "
utype = "torque",
scale = 1.3558179483314004,
Line 6,321 ⟶ 5,905:
name1 = "pound force-foot",
name2 = "pound force-feet",
symbol = "
utype = "torque",
scale = 1.3558179483314004,
Line 6,329 ⟶ 5,913:
["lb.in"] = {
name1 = "pound force-inch",
symbol = "
utype = "torque",
scale = 0.1129848290276167,
Line 6,338 ⟶ 5,922:
name1 = "pound force-foot",
name2 = "pound force-feet",
symbol = "
utype = "torque",
scale = 1.3558179483314004,
Line 6,347 ⟶ 5,931:
name1 = "pound-foot",
name2 = "pound-feet",
symbol = "
utype = "torque",
scale = 1.
default = "Nm",
link = "Pound-foot (torque)",
Line 6,358 ⟶ 5,942:
name2 = "metre kilograms-force",
name2_us = "meter kilograms-force",
symbol = "
utype = "torque",
scale = 9.80665,
default = "Nm lbfft",
link = "Kilogram metre (torque)",
},
["m.kgf"] = {
Line 6,369 ⟶ 5,953:
name2 = "metre kilograms-force",
name2_us = "meter kilograms-force",
symbol = "
utype = "torque",
scale = 9.80665,
default = "Nm lbfft",
link = "Kilogram metre (torque)",
},
["mN.m"] = {
name1 = "millinewton
name1_us = "millinewton
symbol = "
utype = "torque",
scale = 0.001,
default = "lb.in",
link = "Newton
},
["Nm"] = {
utype = "torque",
alttype = "energy",
scale = 1,
prefixes = 1,
default = "lbfft",
link = "Newton-metre",
},
["kN/m"] = {
Line 6,404 ⟶ 5,990:
},
["lb-f.ft"] = {
target = "lb-fft",
},
Line 6,429 ⟶ 6,012:
["N·m"] = {
target = "Nm",
},
["ton-mile"] = {
symbol = "ton-mile",
usename = 1,
utype = "transportation",
scale = 1.4599723182105602,
default = "tkm",
},
["tkm"] = {
name1 = "tonne-kilometre",
name1_us = "tonne-kilometer",
symbol = "tkm",
utype = "transportation",
scale = 1,
default = "ton-mile",
},
["-12USoz(mL)serve"] = {
Line 6,435 ⟶ 6,033:
sym_us = "12 U.S. fl oz (355 mL) serving",
utype = "volume",
scale = 0.
default = "mL",
link = "Beverage can#
},
["-12USoz(ml)serve"] = {
Line 6,444 ⟶ 6,042:
sym_us = "12 U.S. fl oz (355 ml) serving",
utype = "volume",
scale = 0.
default = "ml",
link = "Beverage can#
},
["-12USozserve"] = {
Line 6,453 ⟶ 6,051:
sym_us = "12 U.S. fl oz serving",
utype = "volume",
scale = 0.
default = "mL",
link = "Beverage can#
},
["acre
name1 = "acre
name2 = "acre
symbol = "
utype = "volume",
scale = 1233.48183754752,
default = "m3",
},
["acre
name1 = "acre
name2 = "acre
symbol = "
utype = "volume",
scale = 1233.48183754752,
default = "m3",
},
["AUtbsp"] = {
name1 = "Australian tablespoon",
symbol = "AU tbsp",
utype = "volume",
scale = 0.000020,
default = "ml",
},
["Bcuft"] = {
name1 = "billion cubic foot",
name2 = "billion cubic feet",
symbol = "billion cu ft",
utype = "volume",
scale = 28316846.592,
default = "Gl",
link = "Cubic foot",
},
["bdft"] = {
Line 6,519 ⟶ 6,133:
scale = 3.624556363776,
default = "m3",
link = "Cord (
},
["cufoot"] = {
Line 6,564 ⟶ 6,178:
utype = "volume",
scale = 0.04091481,
default = "
link = "Firkin (unit)",
},
["foot3"] = {
},
["Goilbbl"] = {
Line 6,581 ⟶ 6,191:
scale = 158987294.928,
default = "v * 1.58987294928 < 10 ! e6 ! e9 ! m3",
link = "Barrel (
},
["gr water"] = {
name1 = "grains water",
name2 = "grains water",
symbol = "gr H<sub>2</sub>O",
utype = "volume",
scale = 0.00000006479891,
default = "cm3",
link = "Grain (unit)",
},
["grt"] = {
Line 6,596 ⟶ 6,215:
utype = "volume",
scale = 0.16365924,
default = "
link = "Barrel (unit)",
},
Line 6,604 ⟶ 6,223:
utype = "volume",
scale = 0.03636872,
default = "
},
["impbu"] = {
Line 6,618 ⟶ 6,237:
utype = "volume",
scale = 0.00454609,
default = "
},
["impgi"] = {
Line 6,633 ⟶ 6,252:
utype = "volume",
scale = 0.01818436,
default = "
link = "Kenning (unit)",
},
Line 6,648 ⟶ 6,267:
utype = "volume",
scale = 0.00909218,
default = "
link = "Peck",
},
Line 6,656 ⟶ 6,275:
utype = "volume",
scale = 0.00056826125,
default = "
},
["impqt"] = {
Line 6,671 ⟶ 6,290:
utype = "volume",
scale = 0.08182962,
default = "
},
["koilbbl"] = {
Line 6,680 ⟶ 6,299:
scale = 158.987294928,
default = "v * 1.58987294928 < 10 ! ! e3 ! m3",
link = "Barrel (
},
["L"] = {
Line 6,701 ⟶ 6,320:
default = "impgal USgal",
link = "Litre",
},
["ll"] = {
name1 = "litre",
name1_us = "liter",
symbol = "l",
utype = "volume",
scale = 0.001,
default = "impgal USgal",
},
["m3"] = {
Line 6,720 ⟶ 6,347:
scale = 158.987294928,
default = "v * 1.58987294928 < 10 ! e3 ! ! m3",
link = "Barrel (
},
["MMoilbbl"] = {
Line 6,737 ⟶ 6,356:
scale = 158987.294928,
default = "v * 1.58987294928 < 10 ! e3 ! e6 ! m3",
link = "Barrel (
},
["Moilbbl"] = {
Line 6,746 ⟶ 6,365:
scale = 158987.294928,
default = "v * 1.58987294928 < 10 ! e3 ! e6 ! m3",
link = "Barrel (
},
["MTON"] = {
Line 6,752 ⟶ 6,371:
symbol = "MTON",
utype = "volume",
scale = 1.
default = "m3",
},
Line 6,773 ⟶ 6,392:
scale = 0.158987294928,
default = "m3",
link = "Barrel (
},
["stere"] = {
symbol = "
usename = 1,
utype = "volume",
Line 6,789 ⟶ 6,408:
scale = 158987294928,
default = "v * 1.58987294928 < 10 ! e9 ! e12 ! m3",
link = "Barrel (
},
["USbbl"] = {
Line 6,798 ⟶ 6,417:
utype = "volume",
scale = 0.119240471196,
default = "
link = "Barrel (unit)",
},
Line 6,808 ⟶ 6,427:
utype = "volume",
scale = 0.117347765304,
default = "
link = "Barrel (unit)",
},
Line 6,818 ⟶ 6,437:
utype = "volume",
scale = 0.03523907016688,
default = "
link = "Bushel",
},
Line 6,828 ⟶ 6,447:
utype = "volume",
scale = 0.03523907016688,
default = "
link = "Bushel",
},
Line 6,848 ⟶ 6,467:
utype = "volume",
scale = 0.00440488377086,
default = "
link = "Gallon",
},
Line 6,878 ⟶ 6,497:
utype = "volume",
scale = 0.003785411784,
default = "
link = "Gallon",
},
Line 6,888 ⟶ 6,507:
utype = "volume",
scale = 0.003785411784,
default = "
},
["USgi"] = {
Line 6,905 ⟶ 6,524:
utype = "volume",
scale = 0.01761953508344,
default = "
link = "Kenning (unit)",
},
Line 6,934 ⟶ 6,553:
utype = "volume",
scale = 0.00880976754172,
default = "
link = "Peck",
},
Line 6,944 ⟶ 6,563:
utype = "volume",
scale = 0.000473176473,
default = "
link = "Pint",
},
Line 6,967 ⟶ 6,586:
default = "ml impoz",
link = "Quart",
},
["UStbsp"] = {
name1 = "US tablespoon",
name1_us = "U.S. tablespoon",
symbol = "US tbsp",
sym_us = "U.S. tbsp",
utype = "volume",
scale = 1.4786764781250001e-5,
default = "ml",
},
["winecase"] = {
Line 6,973 ⟶ 6,601:
utype = "volume",
scale = 0.009,
default = "
link = "Case (goods)",
},
Line 6,984 ⟶ 6,612:
target = "USgal",
sp_us = true,
customary= 2,
},
Line 7,010 ⟶ 6,637:
},
["acre feet"] = {
target = "acre
},
["acre foot"] = {
target = "acre-foot",
},
["acre ft"] = {
target = "acre-ft",
},
["acre-feet"] = {
target = "acre
},
["acre.foot"] = {
target = "acre
},
["acre.ft"] = {
target = "acre
},
["acre·ft"] = {
target = "acre
},
["bushels"] = {
Line 7,035 ⟶ 6,662:
["cid"] = {
target = "CID",
},
["ft3"] = {
Line 7,071 ⟶ 6,686:
["in3"] = {
target = "cuin",
symbol = "in<sup>3</sup>",
},
["hm³"] = {
target = "hm3",
},
["kcuft"] = {
Line 7,128 ⟶ 6,747:
target = "USbbl",
sp_us = true,
default = "
},
["U.S.beerbbl"] = {
target = "USbeerbbl",
sp_us = true,
default = "
},
["U.S.bsh"] = {
target = "USbsh",
sp_us = true,
default = "
},
["U.S.bu"] = {
target = "USbu",
sp_us = true,
default = "
},
["U.S.drybbl"] = {
Line 7,172 ⟶ 6,791:
target = "USgal",
sp_us = true,
link = "U.S. gallon",
},
Line 7,178 ⟶ 6,796:
target = "USgal",
sp_us = true,
link = "U.S. gallon",
},
Line 7,223 ⟶ 6,840:
},
["usdrygal"] = {
target = "
},
["usdrypt"] = {
Line 7,295 ⟶ 6,912:
usename = 1,
utype = "volume per unit area",
scale = 8.
default = "m3/ha",
link = "Bushel",
Line 7,303 ⟶ 6,920:
utype = "volume per unit area",
default = "m3/km2",
},
["cuyd/mi"] = {
per = { "cuyd", "mi" },
utype = "volume per unit length",
default = "m3/km",
},
["m3/km"] = {
per = { "m3", "km" },
utype = "volume per unit length",
default = "cuyd/mi",
},
["mich"] = {
combination= { "ch", "mi" },
multiple = { 80 },
utype = "length",
},
["michlk"] = {
combination= { "chlk", "mi" },
multiple = { 80 },
utype = "length",
},
["michainlk"] = {
combination= { "chainlk", "mi" },
multiple = { 80 },
utype = "length",
},
["miyd"] = {
combination= { "yd", "mi" },
multiple = { 1760 },
utype = "length",
},
["miydftin"] = {
Line 7,358 ⟶ 7,005:
multiple = { 14 },
utype = "mass",
},
["GN LTf"] = {
Line 7,533 ⟶ 7,012:
["GN LTf STf"] = {
combination= { "GN", "-LTf", "-STf" },
utype = "force",
},
Line 7,549 ⟶ 7,020:
["GN STf LTf"] = {
combination= { "GN", "-STf", "-LTf" },
utype = "force",
},
Line 7,573 ⟶ 7,028:
["kN LTf STf"] = {
combination= { "kN", "-LTf", "-STf" },
utype = "force",
},
Line 7,589 ⟶ 7,036:
["kN STf LTf"] = {
combination= { "kN", "-STf", "-LTf" },
utype = "force",
},
["LTf STf"] = {
combination= { "-LTf", "-STf" },
utype = "force",
},
Line 7,621 ⟶ 7,048:
["MN LTf STf"] = {
combination= { "MN", "-LTf", "-STf" },
utype = "force",
},
Line 7,645 ⟶ 7,056:
["MN STf LTf"] = {
combination= { "MN", "-STf", "-LTf" },
utype = "force",
},
Line 7,686 ⟶ 7,061:
combination= { "-STf", "-LTf" },
utype = "force",
},
["L/100 km mpgimp"] = {
Line 7,757 ⟶ 7,068:
["l/100 km mpgimp"] = {
combination= { "l/100 km", "mpgimp" },
utype = "fuel efficiency",
},
Line 7,773 ⟶ 7,076:
["L/100 km mpgus"] = {
combination= { "L/100 km", "mpgus" },
utype = "fuel efficiency",
},
["l/100 km mpgus"] = {
combination= { "l/100 km", "mpgus" },
utype = "fuel efficiency",
},
Line 7,818 ⟶ 7,085:
combination= { "mpgimp", "L/100 km" },
utype = "fuel efficiency",
},
["LT ST t"] = {
combination= { "
utype = "mass",
},
["LT t ST"] = {
combination= { "
utype = "mass",
},
["ST LT t"] = {
combination= { "-ST", "
utype = "mass",
},
["ST t LT"] = {
combination= { "-ST", "t", "
utype = "mass",
},
["t LT ST"] = {
combination= { "t", "
utype = "mass",
},
Line 8,142 ⟶ 7,109:
combination= { "LT", "ST" },
utype = "mass",
},
["kPa kg/cm2"] = {
combination= { "kPa", "kgf/cm2" },
utype = "pressure",
Line 8,230 ⟶ 7,117:
combination= { "kPa", "-lb/in2" },
utype = "pressure",
},
["floz"] = {
combination= { "impoz", "USoz" },
utype = "volume",
},
Line 9,332 ⟶ 7,155:
["TJ"] = "kWh",
["YJ"] = "kWh",
["yJ"] = "
["ZJ"] = "kWh",
["zJ"] = "meV",
Line 9,361 ⟶ 7,184:
["e9USgal/s"] = "v * 3.785411784 < 1000 ! e6 ! e9 ! m3/s",
["nN"] = "gr-f",
["
["mN"] = "oz-f",
["am"] = "in",
Line 9,391 ⟶ 7,214:
["Zm"] = "mi",
["zm"] = "in",
["
["e12lb"] = "v * 4.5359237 < 10 ! Mt ! Gt",
["e3lb"] = "v * 4.5359237 < 10 ! kg ! t",
Line 9,408 ⟶ 7,231:
["Mg"] = "LT ST",
["ng"] = "gr",
["
["mBq"] = "fCi",
["kBq"] = "nCi",
["MBq"] = "
["GBq"] = "mCi",
["TBq"] = "Ci",
Line 9,419 ⟶ 7,242:
["pCi"] = "Bq",
["nCi"] = "Bq",
["
["mCi"] = "MBq",
["kCi"] = "TBq",
["MCi"] = "PBq",
["ns"] = "
["
["ms"] = "s",
["ks"] = "h",
Line 9,432 ⟶ 7,255:
["Ps"] = "million year",
["Es"] = "thousand million year",
["MK"] = "keVT",
["cL"] = "impoz usoz",
["cl"] = "impoz usoz",
Line 9,437 ⟶ 7,261:
["dL"] = "impoz usoz",
["dl"] = "impoz usoz",
["mm<sup>3</sup>"] = "cuin",
["dm<sup>3</sup>"] = "cuin",
["e12cuft"] = "v * 2.8316846592 < 100 ! e9 ! e12 ! m3",
Line 9,476 ⟶ 7,301:
["TL"] = "cumi",
["Tl"] = "cumi",
["
["
}
Line 9,493 ⟶ 7,318:
["kJ"] = "Kilojoule",
["MJ"] = "Megajoule",
["GJ"] = "Gigajoule",
["TJ"] = "Terajoule",
["fm"] = "Femtometre",
["pm"] = "Picometre",
["nm"] = "Nanometre",
["
["mm"] = "Millimetre",
["cm"] = "Centimetre",
Line 9,510 ⟶ 7,337:
["Zm"] = "Zettametre",
["Ym"] = "Yottametre",
["
["mg"] = "Milligram",
["kg"] = "Kilogram",
Line 9,520 ⟶ 7,347:
["pW"] = "Picowatt",
["nW"] = "Nanowatt",
["
["mW"] = "Milliwatt",
["kW"] = "Kilowatt",
Line 9,534 ⟶ 7,361:
["ps"] = "Picosecond",
["ns"] = "Nanosecond",
["
["ms"] = "Millisecond",
["ks"] = "Kilosecond",
Line 9,544 ⟶ 7,371:
["Zs"] = "Zettasecond",
["Ys"] = "Yottasecond",
["mm<sup>3</sup>"] = "Cubic millimetre",
["cm<sup>3</sup>"] = "Cubic centimetre",
["dm<sup>3</sup>"] = "Cubic decimetre",
["dam<sup>3</sup>"] = "Cubic decametre",
["km<sup>3</sup>"] = "Cubic kilometre",
["
["
["mL"] = "Millilitre",
["ml"] = "Millilitre",
Line 9,570 ⟶ 7,398:
["PL"] = "Petalitre",
["Pl"] = "Petalitre",
}
---------------------------------------------------------------------------
-- Do not change the data in this table because it is created by running --
-- a script that reads the wikitext from a wiki page (see note above). --
---------------------------------------------------------------------------
local per_unit_fixups = {
-- Automatically created per units of form "x/y" may have their unit type
-- changed, for example, "length/time" is changed to "speed".
-- Other adjustments can also be specified.
["/area"] = "per unit area",
["/volume"] = "per unit volume",
["area/area"] = "area per unit area",
["energy/length"] = "energy per unit length",
["energy/mass"] = "energy per unit mass",
["energy/time"] = { utype = "power", link = "Power (physics)" },
["energy/volume"] = "energy per unit volume",
["force/area"] = { utype = "pressure", link = "Pressure" },
["length/length"] = { utype = "gradient", link = "Grade (slope)" },
["length/time"] = { utype = "speed", link = "Speed" },
["length/time/time"] = { utype = "acceleration", link = "Acceleration" },
["mass/area"] = { utype = "pressure", multiplier = 9.80665 },
["mass/length"] = "linear density",
["mass/mass"] = "concentration",
["mass/power"] = "mass per unit power",
["mass/time"] = "mass per unit time",
["mass/volume"] = { utype = "density", link = "Density" },
["power/mass"] = "power per unit mass",
["power/volume"] = { link = "Power density" },
["pressure/length"] = "fracture gradient",
["speed/time"] = { utype = "acceleration", link = "Acceleration" },
["volume/area"] = "volume per unit area",
["volume/length"] = "volume per unit length",
["volume/time"] = "flow",
}
Line 9,576 ⟶ 7,438:
default_exceptions = default_exceptions,
link_exceptions = link_exceptions,
per_unit_fixups = per_unit_fixups,
}
| |||