|
local extra_units = {
["100mibit"] = {
target_name1 = "mibit",
multiplier_symbol = 100"bit",
utype = " torqueinformation", ▼ },
["100milesper-km2"] = {
targetname1 = "miper square kilometre",
name1_us = " tonne-per square kilometer", ▼ symbol = "miles",
name1name2 = " tonne-per square kilometre", ▼
multiplier= 100,
name2_us = "per square kilometer",
},
symbol = "per km<sup>2</sup>",
["g0-temp"] = { -- test how g0 will work in next release; the zero is not in italics
name1utype = "standardper gravityunit area",
name2scale = "standard gravities"1e-6,
symbol default = "''g''<sub>0</sub>sqmi",
utypelink = "accelerationSquare kilometre",
scale = 9.80665,
default = "m/s2",
},
["g-force"] = {
name2 = "''g''",
symbol = "''g''",
utype = "acceleration",
scale = 9.80665,
default = "m/s2",
},
["kpm"] = {
name1 = "kilopond metre",
name1_us = "kilopond meter",
symbol = "kp⋅m",
scale = 9.80665,
default = "Nm lbft",
link = "Kilogram metre (torque)",
},
["miyd"] = {
combination= { "yd", "mi" },
multiple = { 1760 },
utype = "length",
},
["scf2"] = {
name1 = "standard cubic foot",
name2 = "standard cubic feet",
symbol = "scf",
utype = "energy",
scale = 2869.2044809344,
link = "Standard cubic foot",
},
["scfoot2"] = {
name1 = "standard cubic foot",
name2 = "standard cubic foot",
symbol = "scf",
utype = "energy",
scale = 2869.2044809344,
default = "kJ",
link = "Standard cubic foot",
},
["mi/kWh"] = {
name1 = "miles per kiloWatt hour",
per = { "mi", "kWh" },
utype = "Energy per unit length",
invert = -1,
default = "kWh/100km",
},
["ton-mile"] = {
symbol = "ton-mile",
utype = "transportation",
scale = 1.4599723182105602,
default = "tkm",
},
["tkm"] = {
▲ name1 = "tonne-kilometre",
▲ name1_us = "tonne-kilometer",
symbol = "tkm",
utype = "transportation",
default = "ton-mile",
},
["rpm"] = {
name1 = "revolution per minute",
name2 = "revolutions per minute",
symbol = "rpm",
utype = "length",
scale = 2.0013845711889122e-7,
invert = -1,
iscomplex= true,
default = "Hz",
link = "Revolutions per minute",
},
}
|
