Earthdata Forum

Posted: **Wed Feb 13, 2019 10:35 am America/New_York**

I started seeing these errors in my log files. Any ideas?

Reading Thuillier_F0.dat
Processing at 1000 meter resolution.
1000-meter file: /work/b/bmurch/tmp/S4P_MODIS_H5_MODIST.C_ATLANTIC.2002.243_version_0.05_i3QkMLCV/MOD021KM.2002243.1505.C_ATLANTIC.hdf

File was generated from L1A extract of size 396 x 2580
Pixels 959 - 1354
Lines 1061 - 3640
Allocated 685540 bytes in L1 record.
Allocated 269280 bytes in L2 record.

Opening: /work/b/bmurch/tmp/S4P_MODIS_H5_MODIST.C_ATLANTIC.2002.243_version_0.05_i3QkMLCV/T20022431505.1KM.C_ATLANTIC.L2_LAC_OC

The following products will be included in /work/b/bmurch/tmp/S4P_MODIS_H5_MODIST.C_ATLANTIC.2002.243_version_0.05_i3QkMLCV/T20022431505.1KM.C_ATLANTIC.L2_LAC_OC.
0 angstrom
1 aot_869
2 chlor_a
3 par
4 pic
5 poc
...
58 Lr_1640
59 Lr_2130
60 ozone
61 solz
62 senz
63 sola
64 sena
65 glint_coef
66 l2_flags
-E- /home/seadas/ocssw/oel_hdf4/libdfutils/wrapper.c 491: NetCDF: HDF error for wavelength

ERROR: /work/b/bmurch/tmp/S4P_MODIS_H5_MODIST.C_ATLANTIC.2002.243_version_0.05_i3QkMLCV/T20022431505.1KM.C_ATLANTIC.L2_LAC_OC processing failed

Posted: **Wed Feb 13, 2019 11:11 am America/New_York**

> Any ideas?

Not without a par file

Posted: **Wed Feb 13, 2019 12:20 pm America/New_York**

Sean,
Here is the PAR file contents:
cat /shares/cms_optics/bmurch/holding/S4P_MODIS_H5_MODIST.C_ATLANTIC.2002.243_version_0.05_i3QkMLCV/T20022431505.1KM.C_ATLANTIC.L2_LAC_OC.par
ifile=/work/b/bmurch/tmp/S4P_MODIS_H5_MODIST.C_ATLANTIC.2002.243_version_0.05_i3QkMLCV/MOD021KM.2002243.1505.C_ATLANTIC.hdf
geofile=/work/b/bmurch/tmp/S4P_MODIS_H5_MODIST.C_ATLANTIC.2002.243_version_0.05_i3QkMLCV/MOD03.2002243.1505.C_ATLANTIC.hdf
ofile1=/work/b/bmurch/tmp/S4P_MODIS_H5_MODIST.C_ATLANTIC.2002.243_version_0.05_i3QkMLCV/T20022431505.1KM.C_ATLANTIC.L2_LAC_OC
l2prod1=angstrom,aot_869,chlor_a,par,pic,poc,tau_869,epsilon,sst,qual_sst,nflh,Rrs_vvv,Rrs_748,adg_443_qaa,aph_443_qaa,bbp_547_qaa,Kd_488_lee,Kd_547_lee,Zeu_lee,Lt_vvv,Lt_748,Lt_859,Lt_869,Lt_1240,Lt_1640,Lt_2130,Lr_vvv,Lr_748,Lr_859,Lr_869,Lr_1240,Lr_1640,Lr_2130,ozone,solz,senz,sola,sena,glint_coef
resolution=1000
maskcloud=0
maskhilt=0
icefile=/shares/cms_optics/apps/seadas/seadas-7.5/ocssw/var/anc/2002/243/N200224300_SEAICE_NSIDC_24h.hdf
met1=/shares/cms_optics/apps/seadas/seadas-7.5/ocssw/var/anc/2002/243/N200224312_MET_NCEPR2_6h.hdf
met2=/shares/cms_optics/apps/seadas/seadas-7.5/ocssw/var/anc/2002/243/N200224318_MET_NCEPR2_6h.hdf
met3=/shares/cms_optics/apps/seadas/seadas-7.5/ocssw/var/anc/2002/243/N200224318_MET_NCEPR2_6h.hdf
ozone1=/shares/cms_optics/apps/seadas/seadas-7.5/ocssw/var/anc/2002/243/N200224300_O3_EPTOMS_24h.hdf
ozone2=/shares/cms_optics/apps/seadas/seadas-7.5/ocssw/var/anc/2002/244/N200224400_O3_EPTOMS_24h.hdf
ozone3=/shares/cms_optics/apps/seadas/seadas-7.5/ocssw/var/anc/2002/244/N200224400_O3_EPTOMS_24h.hdf
sstfile=/shares/cms_optics/apps/seadas/seadas-7.5/ocssw/var/anc/2002/243/N2002243_SST_OIV2AVAM_24h.nc

Posted: **Wed Feb 13, 2019 1:28 pm America/New_York**

Works for me.

Which version of SeaDAS are you running? Can you make the input L1B and GEO files available somewhere?

Sean

Posted: **Wed Feb 13, 2019 1:50 pm America/New_York**

Sean,

Version seadas-7.5.
I found a file system problem that may have affected this. I am going to try again, and see if the problems persist.

I'll let you know.
Brock

Posted: **Fri Feb 15, 2019 9:51 am America/New_York**

Sean,

I have sorted through all the problem files and reprocessed them from the start. All succeeded.
It must have been the transient file system problem that caused the error.
Sorry to have wasted your time.

Cheers,
Brock