Reproducing chlor_a from oc3m and CI
Posted: Wed Jun 17, 2020 6:13 pm America/New_York
In the algorithm description (https://oceancolor.gsfc.nasa.gov/atbd/chlor_a/) it says simply, "In between these values, the CI and OCx algorithm are blended using a weighted approach." In another post here (https://oceancolor.gsfc.nasa.gov/forum/oceancolor/topic_show.pl?pid=34869;hl=oc3m) Chris says, "A slightly *modified* version of Hu et al. 2012 is used where those algorithms are blended between chlorophyll concentrations of 0.15 to 0.2 mg m^-3."
Equation 5 in Hu et al. 2012 uses a set of coefficients for alpha and beta in the blended algorithm (different range: 0.25 to 0.3 mg m^-3). So, what coefficients does SeaDAS 7.5.3 use for alpha and beta to blend oc3m and CI in the 0.15 to 0.2 range?
I looked in seadas-7.5.3/ocssw/share/modis/msl12_defaults.par, but while the basic ocX coefficients and bands are lists, I don't see CI's alpha and beta coefficients.
Cheers
Equation 5 in Hu et al. 2012 uses a set of coefficients for alpha and beta in the blended algorithm (different range: 0.25 to 0.3 mg m^-3). So, what coefficients does SeaDAS 7.5.3 use for alpha and beta to blend oc3m and CI in the 0.15 to 0.2 range?
I looked in seadas-7.5.3/ocssw/share/modis/msl12_defaults.par, but while the basic ocX coefficients and bands are lists, I don't see CI's alpha and beta coefficients.
Cheers