Hello
I have a doubt, I realized l2gen processing for rhos, are the generated products georeferenced?
I tried to run the reprojection tool on my l2 data, generated with l2gen, and it gives me this error
I have my doubts about if the l2 data are projected, since I think it has a distortion. Compared to the l1b data to which I used the reprojection tool.
How could I fix it?
I really appreciate your response and help.
-Rodigo RaHe
SeaDAS Reprojection OCI data
-
rodbager3579
- Posts: 9
- Joined: Thu Aug 22, 2024 6:18 pm America/New_York
SeaDAS Reprojection OCI data
- Attachments
-
- The same area after l2gen
- Captura de pantalla 2024-09-26 123446.png (180.72 KiB) Not viewed yet
-
- My study area, L1b after reprojection tool
- Captura de pantalla 2024-09-26 123500.png (283.77 KiB) Not viewed yet
-
- Error reprojection tool for L2 OCI data
- Captura de pantalla 2024-09-26 123011.png (6.25 KiB) Not viewed yet
Filters:
-
OB SeaDAS - dshea
- Subject Matter Expert
- Posts: 271
- Joined: Thu Mar 05, 2009 10:25 am America/New_York
- Been thanked: 2 times
Re: SeaDAS Reprojection OCI data
I can not speak about the error message, but the reprojection looks correct. L1B and L2 products are geolocated, but the lines and pixels are as the satellite saw them. The distortion you see is "most likely" due to OCI tilting in the bottom of your image. You can also notice the glint in the tilt region which is why OCI tilts.
don
don