Computer aided transceiver: Difference between revisions

Revision as of 07:40, 15 October 2024

Latest revision as of 01:25, 18 February 2025

(8 intermediate revisions by 3 users not shown)

Line 1:

{{Short description|Device for controlling a transceiver radio receiver}}

{{unreferencedmore citations needed|date=DecemberOctober 20162024}}

'''computerComputer aided transceiver''' ('''CAT''') is a non-generic serial protocol<ref>https://circuitdigest.com/tutorial/serial-communication-protocols</ref> used by [[radio amateurs]] for (remotely) controlling a [[transceiver]] [[radio receiver]] equipment using a [[computer]].

Conventional transmitters are manually controlled and used to transmit voice using buttons, dials, etc. However, advances in electronics have come to market devices that can be controlled by a computer and allow digital modes such as [[packet radio]] and also the use of satellite tracking, because it can continuously change the device's frequency according to the [[Doppler effect]]. This is done by connecting a Radio receiver and a PC using a [[CAT interface]] and a [[CAT Program]]

Additionally, CAT interfaces arecan also be used to position tracking antennas, in controllers,. asAs a satellite moves overhead.

A CAT interface is a piece of hardware that connects the PC and radio that provides a connection to allows the radio and the PC to communicate with each other. The CAT interface provides the signals to and fro via correct voltage levels and in the case of a Universal Serial Bus (USB) CAT interface it requires a "protocol" for communication but communication itself is down to the radio and the software on the PC.

Software that may be called a CAT program allows a radio to be controlled through the PC. Changes made on the radio through user interactions on the CAT Program are (generally) shown on the PC's screen.

The functionality of CAT equipment (software & interface) depends on the radio and what features the software writers included in the CAT software. Modern radio systems do have more CAT functionality

If you run a logging program that supports CAT, then that software may take advantage of the CAT system by retrieving information from the radio to help fill in log details, such as the frequency that the contact was made.

CAT is also useful on many radios where there are many sub-menus in the radios menu system, and many of the sub-menu items can be easily changed via the PC. On many HF radios, the CAT system is also used to program the memories on the radio, but you would need to use appropriate programming software.

Line 23:

==References==

{{reflist}}Each radio or controller has unique hardware and a unique set of features. For detailed reference use the specific device's manual/s.

* [[Serial port]]

== External links ==

* [[sourceforge:p/hamlib/wiki/Hamlib/|Hamlib]] — a library that allows to exploit the CAT interfaces of many radio transceivers.

* [https://www.socialhams.net/m/tutorials/view/Computer-Aided-Transceiver-for-Ham-Radio Socialhams] — A blog explaining the use of CAT and its interfaces using [[RS-232|RS232]].

* https://www.icomeurope.com/wp-content/uploads/2020/08/IC-705_ENG_CI-V_1_20200721.pdf — An example document for general ICOM implementations.

[[Category:Telecommunications]]