Sub-band coding: Difference between revisions

Revision as of 20:34, 3 July 2010

Latest revision as of 16:10, 1 March 2025

(34 intermediate revisions by 20 users not shown)

Line 1:

{{Short description|Lossy audio coding technique}}

{{Cleanup|date=February 2007}}

{{about|the signal coding technique|the Bluetooth audio codec|SBC (codec)}}

'''Sub-band coding''' ('''SBC''') is any form of [[transform coding]] that breaks a signal into a number of different [[frequency band]]s and encodes each one independently. This decomposition is often the first step in data compression for audio and video signals.

{{Contextno footnotes|date = October 20092011}}

==Basic Principles==

The utility of SBC is perhaps best illustrated with a specific example. When used for audio compression, SBC exploits what might be considered a deficiency of the human auditory system. Human ears are normally sensitive to a wide range of frequencies, but when a sufficiently loud signal is present at one frequency, the ear will not hear weaker signals at nearby frequencies. We say that the louder signal masks the softer ones. The louder signal is called the masker, and the point at which masking occurs is known, appropriately enough, as the masking threshold.

[[File:SubBandCoding.svg|thumb|500px|Sub-band coding and decoding signal flow diagram]]

The basic idea of SBC is to enable a data reduction by discarding information about frequencies which are masked. The result differs from the original signal, but if the discarded information is chosen carefully, the difference will not be noticeable, or more importantly, objectionable.

In [[signal processing]], '''Subsub-band coding''' ('''SBC''') is any form of [[transform coding]] that breaks a signal into a number of different [[frequency band]]s, typically by using a [[fast Fourier transform]], and encodes each one independently. This decomposition is often the first step in data compression for audio and video signals.

SBC is the core technique used in many popular [[lossy audio compression]] algorithms including [[MP3]].

==Encoding audio signals==

The simplest way to digitally encode audio signals is [[pulse-code modulation]] (PCM), which is used on [[audio CDs]], [[Digital Audio Tape|DAT]] recordings, and so on. Digitization transforms continuous signals into discrete ones by sampling a signal's amplitude at uniform intervals and [[rounding]] to the nearest value representable with the available [[Audio bit depth|number of bits]]. This process is fundamentally inexact, and involves two errors: ''[[discretization error]],'' from sampling at intervals, and ''[[quantization error]],'' from rounding.

The more bits used to represent each sample, the finer the granularity in the digital representation, and thus the smaller the quantization error. Such ''quantization errors'' may be thought of as a type of noise, because they are effectively the difference between the original source and its binary representation. With PCM, the only way to mitigate the audible effects of these errors iscan tobe mitigated with [[dither]] and by useusing enough bits to ensure that the noise is low enough to be masked either by the signal itself or by other sources of noise. A high quality signal is possible, but at the cost of a high [[bitrate]] (e.g., over 700 [[kbit/s]] for one channel of CD audio). In effect, many bits are wasted in encoding masked portions of the signal because PCM makes no assumptions about how the human ear hears.

MoreCoding clever ways of digitizing an audio signal cantechniques reduce that wastebitrate by exploiting known characteristics of the auditory system. A classic method is nonlinear PCM, such as the [[muμ-law algorithm]] encoding (named after a perceptual curve in auditory perception research). Small signals are digitized with finer granularity than are large ones; the effect is to add noise that is proportional to the signal strength. Sun's [[Au file format]] for sound is a popular example of mu-law encoding. Using 8-bit mu-law encoding would cut the per-channel bitrate of CD audio down to about 350  kbit/s, or about half the standard rate. Because this simple method only minimally exploits masking effects, it produces results that are often audibly poorerinferior thancompared to the original.

==Basic Principlesprinciples==

Sub-band coding is used for example in [[G.722]] codec. It uses sub-band adaptive differential pulse code modulation (SB-[[ADPCM]]) within a bit rate of 64 kbit/s. In the SB-ADPCM technique used, the frequency band is split into two sub-bands (higher and lower) and the signals in each sub-band are encoded using ADPCM.

The utility of SBC is perhaps best illustrated with a specific example. When used for audio compression, SBC exploits what[[auditory mightmasking]] be considered a deficiency ofin the human [[auditory system]]. Human ears are normally sensitive to a wide range of frequencies, but when a sufficiently loud signal is present at one frequency, the ear will not hear weaker signals at nearby frequencies. We say that the louder signal masks the softer ones. The louder signal is called the masker, and the point at which masking occurs is known, appropriately enough, as the masking threshold.

The basic idea of SBC is to enable a data reduction by discarding information about frequencies which are masked. The result differs from the original signal, but if the discarded information is chosen carefully, the difference will not be noticeable, or more importantly, objectionable.

==A basic SBC scheme==

To enable higher quality compression, one may use subband coding. First, a digital filter bank divides the input signal spectrum into some number (e.g., 32) of subbands. The psychoacoustic model looks at the energy in each of these subbands, as well as in the original signal, and computes masking thresholds using psychoacoustic information. Each of the subband samples isare quantized and encoded so as to keep the quantization noise below the dynamically computed masking threshold. The final step is to format all these quantized samples into groups of data called frames, to facilitate eventual playback by a decoder.

[[Image:sbc.fig1.gif]]

To enable higher quality compression, one may use subband coding. First, a digital filter bank divides the input signal spectrum into some number (e.g., 32) of subbands. The psychoacoustic model looks at the energy in each of these subbands, as well as in the original signal, and computes masking thresholds using psychoacoustic information. Each of the subband samples is quantized and encoded so as to keep the quantization noise below the dynamically computed masking threshold. The final step is to format all these quantized samples into groups of data called frames, to facilitate eventual playback by a decoder.

Decoding is much easier than encoding, since no psychoacoustic model is involved. The frames are unpacked, subband samples are decoded, and a frequency-time mapping reconstructs an output audio signal.

==Applications==

Over the last five to ten years, SBC systems have been developed by many of the key companies and laboratories in the audio industry. Beginning in the late 1980s, a standardization body called, the Motion[[Moving Picture Experts Group]] (MPEG), developed generic standards for coding of both audio and video. Subband coding resides at the heart of the popular MP3 format (more properly known as [[MPEG-1 Audio Layer III]]), for example.

Sub-band coding is used for example in the [[G.722]] codec. Itwhich uses sub-band adaptive differential pulse code modulation (SB-[[ADPCM]]) within a bit rate of 64  kbit/s. In the SB-ADPCM technique used, the frequency band is split into two sub-bands (higher and lower) and the signals in each sub-band are encoded using ADPCM.

==External links==

* [https://web.archive.org/web/20070613152917/http://www.otolith.com/otolith/olt/sbc.html Sub-Band Coding Tutorial]

* [http://sbc.sourceforge.net/ Bluetooth low-complexity, subband codec]

{{Compression Methods}}

{{FOLDOC}}

{{Context|date=October 2009}}

[[Category:Data compression]]

[[Category:Audio engineering]]

[[Category:Signal processing]]

[[de:Teilbandkodierung]]