Steffensen's method: Difference between revisions

Revision as of 01:11, 18 June 2025

Latest revision as of 18:14, 24 July 2025

(23 intermediate revisions by 4 users not shown)

Line 1:

{{short description|Newton-like root-finding algorithm that does not use derivatives}}

In [[numerical analysis]], '''Steffensen's method''' is an [[iterative method]] named after [[Johan Frederik Steffensen]] for numerical [[root-finding method|root-finding]] named after [[Johan Frederik Steffensen]] that is similar to the [[secant method]] and to [[Newton's method]]. '''Steffensen's method''' achieves a quadratic [[order of convergence]] without using [[derivative]]s, whereas the more familiar Newton's method also converges quadratically, but requires derivatives and the secant method does not require derivatives but also converges less quickly than quadratically.

Steffensen's method has the drawback that it requires two function evaluations per step, whereas the secant method requires only one evaluation per step, so it is not necessarily most efficient in terms of [[computational cost]], depending on the number of iterations each requires. Newton's method also requires evaluating two functions per step – for the function and for its derivative – and its computational cost varies between being at best the same as the secant method, and at worst the same as Steffensen's method. (forFor most functions, where calculation of the derivative is just as computationally costly as calculating the original function), and so the normal case is that Newton's method is equally costly as Steffensen's.{{efn|

For rare special case functions the derivative for Newton's method can be calculated at negligible cost, by using saved parts from evaluation of the main function. If optimized in this way, Newton's method becomes only slightly more costly per step than the secant method, withand benefits from slightly faster convergence.

}}

Line 9:

==Simple description==

The simplest form of the formula for Steffensen's method occurs when it is used to find a [[zero of a function|zero]] of a [[real function]] <math>f</math>; that is, to find the real value <math>\ x_\star\ </math> that satisfies <math>\ f(x_\star) = 0 ~.</math> Near the solution <math>\ x_\star\ ,</math> the derivative of the function, <math>\ f'\ ,</math> needs to either exactly or very nearly satisfy <math> -1 < f'(x_\star) < 0\ ;~.</math> this{{efn|
name=deriv_cdx_note|
The condition <math> -1 < f'(x_\star) < 0\ </math> ensures that if <math>\ f\ </math> ''was'' used as a correction-function for <math>\ x\ ,</math> for finding its ''own'' solution, it would step in the direction of the solution (<math>\ f' < 0\ </math>), and that the new value would tend to lie in between the solution and the prior value (<math> -1\ < f'\ </math>).{{efn| But note that <math>\ f\ </math> is only a self-correction function ''in principle''. – itIt is not actually used for that purpose –, and it is not required to workbe efficientlyefficient, even if it were so used.
}}
For some functions, Steffensen's method can work even if this condition is not met, but in such a case, the starting value <math>\ x_0\ </math> must be ''very'' close to the actual solution <math>\ x_\star\ ,</math> and convergence to the solution may be slow. Adjustment of the size of the method's intermediate step, mentioned later, can improve convergence in some of these cases.

Given an adequate starting value <math>\ x_0\ ,</math> a sequence of values <math>\ x_0,\ \ x_1,\ x_2,\ \dots,\ x_n,\ \dots\ </math> can be generated using the formula below. When it works, each value in the sequence is much closer to the solution <math>\ x_\star\ </math> than the prior value. The value <math>\ x_n\ </math> from the current step generates the value <math>\ x_{n+1}\ </math> for the next step, via the formula<ref name=Dahlquist-Björck-1974/>

Line 29 ⟶ 33:

Because the value of <math>\ g\ </math> is an approximation for <math>\ f'\ ,</math> its value can optionally be checked to see if it meets the condition <math>\ -1 < g < 0\ ,</math> which is required to guarantee convergence of Steffensen's algorithm. Although slight non-conformance may not necessarily be dire, any large departure from the condition warns that Steffensen's method is liable to fail, and temporary use of some fallback algorithm is warranted (e.g. the more robust [[Illinois algorithm]], or plain [[regula falsi]]).

It is only for the purpose of finding <math>\ h\ </math> for this auxiliary point that the value of the function <math>\ f\ </math> must be an adequate correction to get closer to its own solution, and for that reason fulfill the requirement that <math>\ -1 < f'(x_\star) < 0 ~.</math>{{efn|name=deriv_cdx_note}} For all other parts of the calculation, Steffensen's method only requires the function <math>\ f\ </math> to be continuous and to actually have a nearby solution.<ref name=Dahlquist-Björck-1974/> Several modest modifications of the step <math>\ h\ </math> used in the formula for the slope <math>\ g\ </math> exist, such as multiplying it by {{sfrac| 1 |2}} or {{sfrac| 3 |4}}, to accommodate functions <math>\ f\ </math> that do not quite meet the requirement.

==Advantages and drawbacks==

The main advantage of Steffensen's method is that it has [[quadratic convergence]]<ref name=Dahlquist-Björck-1974/> like [[Newton's method]] &ndash; that is, both methods find roots to an equation <math>\ f\ </math> just as "quickly". In this case, ''quickly'' means that for both methods, the number of correct digits in the answer doubles with each step. But the formula for Newton's method requires evaluation of the function's derivative <math>\ f'\ </math> as well as the function <math>\ f\ ,</math> while Steffensen's method only requires <math>\ f\ </math> itself. This is important when the derivative is not easily or efficiently available.

The price for the quick convergence is the double function evaluation: Both <math>\ f(x_n)\ </math> and <math>\ f(x_n + h)\ </math> must be calculated, which might be time-consuming if <math>\ f\ </math> is complicated. For comparison, both [[regula falsi]] and the [[secant method]] only need one function evaluation per step. The secant method increases the number of correct digits by "only" a factor of roughly &thinsp; 1.6&nbsp;per step, &thinsp; but one can do twice as many steps of the secant method within a given time. Since the secant method can carry out twice as many steps in the same time as Steffensen's method,{{efn|

Because <math>\ f( x_n + h )\ </math> requires the prior calculation of <math>\ h \equiv f(x_n)\ ,</math> the two evaluations must be done sequentially – the algorithm ''per se'' cannot be made faster by running the function evaluations in parallel. This is yet another disadvantage of Steffensen's method.

}} in practical use the secant method actually converges faster than Steffensen's method, when both algorithms succeed: theThe secant method achieves a factor of about {{nobr|&thinsp; {{math|(1.6){{sup|2}} ≈ 2.6}} times &thinsp;}} as many digits for every two steps (two function evaluations), compared to Steffensen's factor of {{math|2}} for every one step (two function evaluations).

Similar to most other [[Root-finding algorithm#Iterative methods|iterative root-finding algorithms]], the crucial weakness in Steffensen's method is choosing a "sufficiently close" starting value <math>\ x_0 ~.</math> If the value of <math>\ x_0\ </math> is not "close enough" to the actual solution <math>\ x_\star\ ,</math> the method may fail, and the sequence of values <math>\ x_0, \, x_1, \, x_2, \, x_3, \, \dots\ </math> may either erratically flip-flop between two (or more) extremes, or diverge to infinity, or both.

==Derivation using Aitken's delta-squared process==

Line 89 ⟶ 93:

p0 = p; % update p0 for the next iteration.

end

if abs(p - p0) > tol % If we fail to meet the tolerance, we output a

% message of failure.

Line 114 ⟶ 119:

def steff(f: Func, x: float, tol: float) -> Iterator[float]:

"""SteffensonSteffensen algorithm for finding roots.

This recursive generator yields the x_{n+1} value first then, when the generator iterates,

Line 123 ⟶ 128:

x: Starting value upon first call, each level n that the function recurses x is x_n

"""

while True: n = 0

while True:

if abs(fx)n <=> tol1000:

print("failed to converge in 1000 iterations")

break

else:

n = n + 1

fx = f(x)

if abs(fx) <= tol:

if abs(fx) < tol:

break

else:

Line 134 ⟶ 148:

==Generalization to Banach space==

Steffensen's method can also be used to find an input <math>\ x = x_\star\ </math> for a different kind of function <math>\ F\ </math> that produces output the same as its input: <math>\ x_\star = F(x_\star)\ </math> for the special value <math>\ x_\star ~.</math>. Solutions like <math>\ x_\star\ </math> are called ''[[fixed point (mathematics)|fixed point]]s''. Many of these functions can be used to find their own solutions by repeatedly recycling the result back as input, but the rate of convergence can be slow, or the function can fail to converge at all, depending on the individual function. Steffensen's method accelerates this convergence, to make it [[quadratic convergence|quadratic]].

ForMomentarily orientation,ignoring the rootissues of a more general [[Banach space]] vs. basic [[real numbers]] for the sake of an example: To re-orient the reader to the earlier section, a simple [[toy model]] fixed-point function, <math>f\ \tilde F\ ,</math> andusing theany fixed-pointroot functionsfunction are<math>\ simplyf\ related,</math> bycan be made with <math>\ \tilde F(x) = x + \varepsilon\ f(x) ~.</math>, whereHere <math>\ \varepsilon\ </math> is some scalara constant with the appropriate sign that is small enough in magnitude to make <math>\ \tilde F\ </math> stable under iteration, but large enough for the [[non-linearity]] of the function <math>\ f\ </math> to be appreciable. All issues of a more general [[Banach space]] vs. basic [[real numbers]] being momentarily ignored for the sake of the comparison.

This method for finding fixed points of a real-valued function has been generalized for functions <math>\ F : X \to X\ </math> that map a [[Banach space]] <math>\ X\ </math> onto itself or even more generally <math>\ F : X \to Y\ </math> that map from one [[Banach space]] <math>X </math> into another [[Banach space]] <math>\ Y ~.</math>. The generalized method assumes that a [[Indexed family|family]] of [[Bounded set|bounded]] [[linear operators]] <math>\ \bigl\{\ G(u,v): u, v \in X\ \bigr\}\ </math> associated with <math>\ u\ </math> and <math>\ v\ </math> can be devised that (locally) satisfies the condition<ref name=Johnson-Scholz-1968/>

{{NumBlk|:|<math> F\left( u \right) - F\left( v \right) = G\left( u, v \right)\ \bigl[(\ u - v\ \bigr]) \quad</math>|{{EquationRef|1}}}}

ForThe operator <math>\ G\ </math> is roughly equivalent to a [[Matrix (mathematics)|matrix]] whose entries are all functions of [[vector (mathematics)|vector]] [[Argument of a function|arguments]] <math>\ u\ </math> and <math>\ v ~.</math> Refer again back to the [[Function of a real variable|basic real numbersimple function]] <math>\ f\ ,</math>, given in the first section, where the function simplymerely takes in and puts out real numbers.: There, the function <math>\ g\ </math> is a ''[[divided difference]]''. In the generalized form here, the operator <math>\ G\ </math> is the analogue of a divided difference for use in the [[Banach space]]. The operator <math>G</math> is roughly equivalent to a [[Matrix (mathematics)|matrix]] whose entries are all functions of [[vector (mathematics)|vector]] [[Argument of a function|arguments]] <math>u</math> and <math>v</math>.

If division is possible in the [[Banach space]], then the linear operator <math>\ G\ </math> can be obtained from

:<math> G\left( u, v \right) = \bigl[\ F\left( u \right)- F\left( v \right)\ \bigr]\ \bigl[(\ u - v\ \bigr])^{-1}\ ,</math>

which may provide some insight: Expressed in this way, the linear operator <math>\ G\ </math> can be more easily seen to be an elaborate version of the [[divided difference]] <math>\ g\ </math> discussed in the first section, above. The quotient form is shown here for orientation only; it is ''not'' required ''per se''. Note also that division within the Banach space is not necessary for the elaborated Steffensen's method to be viable; the only requirement is that the operator <math>\ G\ </math> satisfy ({{EquationNote|1}}).

Steffensen's method is then very similar to the Newton's method, except that it uses the divided difference <math>\ G \bigl( F\left( x \right), x \bigr)\ </math> instead of the derivative <math>\ F'(x) ~.</math>. Note that for arguments <math>\ x\ </math> close to some fixed point <math>\ x_\star\ ,</math>, fixed point functions <math>\ F\ </math> and their linear operators <math>\ G\ </math> meeting condition ({{EquationNote|1}}), <math>\ F'(x)\ \approx\ G \bigl( F\left( x \right), x \bigr)\ \approx\ I\ ,</math>, where <math>\ I\ </math> is the identity operator.

In the case that division is possible in the Banach space, the generalized iteration formula is given by

: <math> x_{n+1} = x_n + \Bigl[\ I - G\bigl( F\left( x_n \right), x_n \bigr)\ \Bigr]^{-1}\Bigl[\ F\left( x_n \right) - x_n\ \Bigr]\ ,</math>

for <math>\ n = 1,\, 2,\, 3,\, ... ~.</math>. In the more general case in which division may not be possible, the iteration formula requires finding a solution <math>\ x_{n+1}\ </math> close to <math>\ x_{n}\ </math> for which

: <math> \Bigl[\ I - G\bigl( F\left( x_n \right), x_n \bigr)\ \Bigr] \Bigl[bigl(\ x_{n+1} - x_n \ \Bigr]bigr) = F\left( x_n \right) - x_n ~.</math>

Equivalently, one may seek the solution <math>\ x_{n+1}\ </math> to the somewhat reduced form

: <math> \Bigl[\ I - G\bigl( F\left( x_n \right), x_n \bigr)\ \Bigr]\ x_{n+1} = \Bigl[\ F\left( x_n \right) - G\bigl( F\left( x_n \right), x_n \bigr) \ x_n\ \Bigr]\ ,</math>

with all the values inside square brackets being independent of <math>\ x_{n+1}\ :</math>: theThe bracketed terms all only depend on <math>\ x_{n}\ </math>. However, the second form may not be as numerically stable as the first:; because the first form involves finding a value for a (hopefully) small difference, it may be numerically more likely to avoid excessively large or erratic changes to the iterated value <math>\ x_n ~.</math>.

If the linear operator <math>\ G\ </math> satisfies

: <math> \Bigl\| G \left( u, v \right) - G \left( x, y \right) \Bigr\| \le k \biggl( \Bigl\|u - x \Bigr\| + \Bigr\| v - y \Bigr\| \biggr) </math>

for some positive real constant <math>\ k\ ,</math>, then the method converges quadratically to a fixed point of <math>\ F\ </math> if the initial approximation <math>\ x_0\ </math> is "sufficiently close" to the desired solution <math>\ x_\star\ </math> that satisfies <math>\ x_\star = F(x_\star) ~.</math>.

==Notes==