Cartesian parallel manipulators: Difference between revisions

Revision as of 16:56, 28 December 2020

Latest revision as of 00:50, 19 August 2025

(15 intermediate revisions by 7 users not shown)

Line 1:

{{Too many sections|date=December 2020}}

In robotics, '''Cartesian parallel manipulators''' are [[Manipulator (device)|manipulators]] that move a platform using [[Parallel manipulator|parallel]]-connected kinematic [[Linkage (mechanical)|linkages]] (`'limbs') lined up with a [[Cartesian coordinate system]]. Multiple limbs connect the moving platform to a base. Each limb is driven by a [[linear actuator]] and the linear actuators are mutually perpendicular. The term `'parallel' here refers to the way that the kinematic linkages are put together, it does not connote geometrically [[Parallel (geometry)|parallel]]; i.e., equidistant lines. [[Manipulator (device)|Manipulators]] may also be called `[[Robot|robots]]' or `[[Mechanism (engineering)|mechanisms]]'.

== Context ==

InGenerally, 1637manipulators (also called '[[René DescartesRobot|robots]]<ref>{{Cite' journal|last=Descartes|first=Rene|date=2009-01-01|title=Discourseor on'[[Mechanism the method of rightly conducting the reason, and seeking truth in the sciences(engineering)|url=http://dx.doi.org/10.5214/ans.0972.7531.2009.160108|journal=Annalsmechanisms]]') ofare Neurosciences|volume=16|issue=01|pages=17–21|doi=10.5214/ans.0972.7531.2009.160108|issn=0972-7531}}</ref><ref>{{Citemechanical journal|last=Klubertanz|first=Georgedevices P.|date=1969|title=Discoursethat on Method, Optics, Geometry,position and Meteorology.orientate By Rene Descartesobjects. Trans, with Introd. Paul J. Olscamp|url=http://dx.doi.org/10.5840/schoolman196946493|journal=The Modern Schoolman|volume=46|issue=4|pages=370–371|doi=10.5840/schoolman196946493|issn=0026-8402}}</ref> introduced [[Analytic geometry|analytical geometry]], a fieldposition of [[mathematics]]an that studies [[geometry]]object in termsthree-dimensional of(3D) numbersspace andcan equations. Specifically, Descartesbe specified theby position of a point using twothree numbers ''X, Y, Z'' correspondingknown as to'coordinates.' the horizontal and vertical distance fromIn a reference point in a plane.  Positive or negative numbers indicate the direction of the position relative to the reference point. This `[[Cartesian coordinate system|Cartesian]] [[Coordinate system#:~:text%3DIn%20geometry geometry%2C%20a%20coordinate%20system a coordinate system%2Cmanifold%20such%20as%20Euclidean%20space such as Euclidean space.|coordinate system]]’ may(named beafter extended[[René withDescartes]] awho thirdintroduced number[[analytic ''Z'' corresponding togeometry]], the heightmathematical ofbasis thefor pointcontrolling abovemanipulators) the ''X,coordinates Y''specify plane. distances Consequently the position of a point infrom three dimensionalmutually spaceperpendicular (3D) can be specified by three numbers ''X, Y, Z'' known asreference `coordinates’planes.  The orientation of an object in 3D can be specified by three additional numbers corresponding to the orientation [[Euler angles|angles]].  Generally [[Manipulator (device)|manipulators]] or [[Robot|robots]] are mechanical devices that position and orientate objects specified by their 3D coordinate numbers.  Analytical geometry is the mathematical basis for controlling manipulators. The first [[Remote manipulator| manipulators]] were developed after World War II for the [[Argonne National Laboratory]] to safely handle highly radioactive material [[Teleoperation|remotely]].  The first [[Numerical control|numerically controlled]] manipulators (NC machines) were developed by [[John T. Parsons|Parsons Corp]]. and the [[MIT Servomechanisms Laboratory]], for [[Milling (machining)|milling applications]].  These machines position a cutting tool relative to a Cartesian coordinate system using three mutually perpendicular linear actuators ([[Prismatic joint|prismatic ''P'' joints]]), with ''(PP)P'' [[Kinematic pair#:~:text%3DA%20kinematic%20pair%20is%20a kinematic pair is a%2Celements%20consisting%20of%20simple%20machines consisting of simple machines.|joint topology]].  The first [[industrial robot]],<ref>George C Devol, Programmed article transfer, US patent 2988237, June 13, 1961. </ref> [[Unimation|Unimate]], was invented in the 1950’s1950s. Its control axes correspond to a [[spherical coordinate system]], with ''RRP'' joint topology composed of two [[Revolute joint#:~:text%3DA%20revolute%20joint%20 revolute joint (also%20called called%2Crotation%20along%20a%20common%20axis along a common axis.|revolute ''R'' joints]] in series with a prismatic ''P'' joint.  Most [[Industrial robot|industrial robots]] today are [[Articulated robot#:~:text%3DAn%20articulated%20robot%20is%20a articulated robot is a%2Cof%20means means%2C%20including%20electric%20motors including electric motors.|articulated robots]] composed of a serial chain of revolute ''R'' joints ''RRRRRR''.

== Description ==

Cartesian parallel manipulators are in the intersection of two broader categories of manipulators: [[Cartesian coordinate robot|Cartesian]] and [[Parallel manipulator|parallel]]. Cartesian manipulators are driven by mutually perpendicular linear actuators. They generally have a one-to-one correspondence between the linear positions of the actuators and the ''X, Y, Z'' position coordinates of the moving platform, making them easy to control. Furthermore, Cartesian manipulators do not change the orientation of the moving platform. Most commonly, [[Cartesian coordinate robot|Cartesian manipulators]] are [[Serial manipulator|serial]]-connected; i.e., they consist of a single [[Linkage (mechanical)|kinematic linkage]] chain, i.e. the first linear actuator moves the second one and so on. On the other hand, Cartesian parallel manipulators are parallel-connected, i.e. they consist of multiple kinematic linkages. Parallel-connected manipulators have innate advantages<ref>Z. Pandilov, V. Dukovski, Comparison of the characteristics between serial and parallel robots, Acta Technica Corviniensis-Bulletin of Engineering, Volume 7, Issue 1, Pages 143-160</ref> in terms of stiffness,<ref>{{Cite journal|lastlast1=Geldart|firstfirst1=M|last2=Webb|first2=P|last3=Larsson|first3=H|last4=Backstrom|first4=M|last5=Gindy|first5=N|last6=Rask|first6=K|date=2003|title=A direct comparison of the machining performance of a variax 5 axis parallel kinetic machining centre with conventional 3 and 5 axis machine tools|url=http://dx.doi.org/10.1016/s0890-6955(03)00119-6|journal=International Journal of Machine Tools and Manufacture|volume=43|issue=11|pages=1107–1116|doi=10.1016/s0890-6955(03)00119-6|issn=0890-6955|url-access=subscription}}</ref> precision,<ref>{{Cite journal|date=1997|title=Vibration control for precision manufacturing using piezoelectric actuators|url=http://dx.doi.org/10.1016/s0141-6359(97)81235-4|journal=Precision Engineering|volume=20|issue=2|pages=151|doi=10.1016/s0141-6359(97)81235-4|issn=0141-6359|url-access=subscription}}</ref> dynamic performance<ref>R. Clavel, inventor, S.A. SovevaSwitzerland, assignee. Device for the movement and positioning of an element in space, USA patent number, 4,976,582 (1990)</ref> <ref>{{Cite journalbook|last=Prempraneerach|first=Pradya|datetitle=2014 International Computer Science and Engineering Conference (ICSEC) |titlechapter=Delta parallel robot workspace and dynamic trajectory tracking of delta parallel robot |date=2014|chapter-url=http://dx.doi.org/10.1109/icsec.2014.6978242|journalpages=2014469–474 International Computer Science and Engineering Conference (ICSEC)|publisher=IEEE|doi=10.1109/icsec.2014.6978242|isbn=978-1-4799-4963-2|s2cid=14227646 }}</ref> and in supporting heavy loads.<ref> 

 Stewart D. A Platform with Six Degrees of Freedom. Proceedings of the Institution of Mechanical Engineers. 1965;180(1):371-386. doi:10.1243/PIME_PROC_1965_180_029_02

Line 16:

=== Multipteron family ===

Members of the Multipteron <ref>{{Cite journalbook|lastlast1=Gosselin|firstfirst1=Clement M.|last2=Masouleh|first2=Mehdi Tale|last3=Duchaine|first3=Vincent|last4=Richard|first4=Pierre-Luc|last5=Foucault|first5=Simon|last6=Kong|first6=Xianwen|title=Proceedings 2007 IEEE International Conference on Robotics and Automation |chapter=Parallel Mechanisms of the Multipteron Family: Kinematic Architectures and Benchmarking |chapter-url=http://dx.doi.org/10.1109/robot.2007.363045|journalyear=Proceedings 2007 IEEE|pages=555–560 International Conference on Robotics and Automation|publisher=IEEE|doi=10.1109/robot.2007.363045|isbn=978-1-4244-0602-19|s2cid=5755981 }}</ref> family of manipulators have either 3, 4, 5 or 6 degrees of freedom (DoF). The Tripteron 3-DoF member has three translation degrees of freedom ''3T'' DoF, with the subsequent members of the Multipteron family each adding a rotational ''R'' degree of freedom. Each member of the family has mutually perpendicular linear actuators connected to a fixed base. The moving platform is typically attached to the linear actuators through three geometrically parallel revolute ''R'' joints. See [[Kinematic pair]] for a description of shorthand joint notation used to describe manipulator configurations, like revolute ''R'' joint for example.

==== Tripteron ====

[[File:Tripteron robot.jpg|thumb|Tripteron]]

The 3-DoF Tripteron<ref>Gosselin, C. M., and Kong, X., 2004, “Cartesian Parallel Manipulators,” U.S. Patent No. 6,729,202</ref> <ref>Xianwen Kong, Clément M. Gosselin, Kinematics and Singularity Analysis of a Novel Type of 3-CRR 3-DOF Translational Parallel Manipulator, The International Journal of Robotics Research Vol. 21, No. 9, September 2002, pp. 791-7</ref> <ref>{{Citation|lastlast1=Kong|firstfirst1=Xianwen|title=Type Synthesis of Linear Translational Parallel Manipulators|date=2002|url=http://dx.doi.org/10.1007/978-94-017-0657-5_48|work=Advances in Robot Kinematics|pages=453–462|place=Dordrecht|publisher=Springer Netherlands|isbn=978-90-481-6054-9|access-date=2020-12-14|last2=Gosselin|first2=Clément M.|doi=10.1007/978-94-017-0657-5_48 |url-access=subscription}}</ref> <ref>{{Citation|lastlast1=Kim|firstfirst1=Han Sung|title=Evaluation of a Cartesian Parallel Manipulator|date=2002|url=http://dx.doi.org/10.1007/978-94-017-0657-5_3|work=Advances in Robot Kinematics|pages=21–28|place=Dordrecht|publisher=Springer Netherlands|isbn=978-90-481-6054-9|access-date=2020-12-14|last2=Tsai|first2=Lung-Wen|doi=10.1007/978-94-017-0657-5_3 |url-access=subscription}}</ref><ref>{{Citation|lastlast1=Elkady|firstfirst1=Ayssam|title=Cartesian Parallel Manipulator Modeling, Control and Simulation|date=2008-04-01|url=http://dx.doi.org/10.5772/5435|work=Parallel Manipulators, towards New Applications|publisher=I-Tech Education and Publishing|isbn=978-3-902613-40-0|access-date=2020-12-22|last2=Elkobrosy|first2=Galal|last3=Hanna|first3=Sarwat|last4=Sobh|first4=Tarek|doi=10.5772/5435 |doi-access=free}}</ref> member of the Multipteron family has three parallel-connected kinematic chains consisting of a linear actuator (active prismatic ''<u>P</u>'' joint) in series with three revolute ''R'' joints ''3(<u>P</u>RRR).'' Similar manipulators, with three parallelogram ''Pa'' limbs ''3(<u>PR</u>PaR)'' are the Orthoglide<ref>{{Citation|lastlast1=Wenger|firstfirst1=P.|title=Kinematic Analysis of a New Parallel Machine Tool: The Orthoglide|date=2000|url=http://dx.doi.org/10.1007/978-94-011-4120-8_32|work=Advances in Robot Kinematics|pages=305–314|place=Dordrecht|publisher=Springer Netherlands|isbn=978-94-010-5803-2|access-date=2020-12-14|last2=Chablat|first2=D.|doi=10.1007/978-94-011-4120-8_32 |s2cid=5485837 |arxiv=0707.3666}}</ref> <ref>{{Cite journal|lastlast1=Chablat|firstfirst1=D.|last2=Wenger|first2=P.|date=2003|title=Architecture optimization of a 3-DOF translational parallel mechanism for machining applications, the orthoglide|url=http://dx.doi.org/10.1109/tra.2003.810242|journal=IEEE Transactions on Robotics and Automation|volume=19|issue=3|pages=403–410|doi=10.1109/tra.2003.810242|issn=1042-296X|arxiv=0708.3381|s2cid=3263909 }}</ref> and Parallel cube-manipulator.<ref>{{Cite journal|lastlast1=Liu|firstfirst1=Xin-Jun|last2=Jeong|first2=Jay il|last3=Kim|first3=Jongwon|date=2003-10-24|title=A three translational DoFs parallel cube-manipulator|url=http://dx.doi.org/10.1017/s0263574703005198|journal=Robotica|volume=21|issue=6|pages=645–653|doi=10.1017/s0263574703005198|s2cid=35529910 |issn=0263-5747|url-access=subscription}}</ref> The Pantepteron<ref>{{Cite journal|lastlast1=Briot|firstfirst1=S.|last2=Bonev|first2=I. A.|date=2009-01-06|title=Pantopteron: A New Fully Decoupled 3DOF Translational Parallel Robot for Pick-and-Place Applications|url=http://dx.doi.org/10.1115/1.3046125|journal=Journal of Mechanisms and Robotics|volume=1|issue=2|doi=10.1115/1.3046125|issn=1942-4302}}</ref> is also similar to the Tripteron, with pantograph linkages to speed up the motion of the platform.

==== Qudrupteron ====

[[File:Quadrupteron robot.jpg|link=link=Special:FilePath/Quadrupteron.png|thumb|Quadrupteron]]

The 4-DoF Qudrupteron<ref>{{Cite journal|last=Gosselin|first=C|date=2009-01-06|title=Compact dynamic models for the tripteron and quadrupteron parallel manipulators|url=http://dx.doi.org/10.1243/09596518jsce605|journal=Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering|volume=223|issue=1|pages=1–12|doi=10.1243/09596518jsce605|s2cid=61817314|issn=0959-6518|url-access=subscription}}</ref> has ''3T1R'' DoF with (''3<u>P</u>RRU)(<u>P</u>RRR)'' joint topology.

==== Pentapteron ====

The 5-DoF Pentateron<ref>{{Cite journalbook|lastlast1=Gosselin|firstfirst1=Clement M.|last2=Masouleh|first2=Mehdi Tale|last3=Duchaine|first3=Vincent|last4=Richard|first4=Pierre-Luc|last5=Foucault|first5=Simon|last6=Kong|first6=Xianwen|datetitle=Proceedings 2007 IEEE International Conference on Robotics and Automation |titlechapter=Parallel Mechanisms of the Multipteron Family: Kinematic Architectures and Benchmarking |date=2007|chapter-url=http://dx.doi.org/10.1109/robot.2007.363045|journalpages=Proceedings555–560 2007 IEEE International Conference on Robotics and Automation|publisher=IEEE|doi=10.1109/robot.2007.363045|isbn=978-1-4244-0602-19|s2cid=5755981 }}</ref> has ''3T2R'' DoF with ''5(<u>P</u>RRRR)'' joint topology.

==== Hexapteron ====

The 6-DoF Hexapteron<ref>{{Cite journalbook|lastlast1=Seward|firstfirst1=Nicholas|last2=Bonev|first2=Ilian A.|datetitle=2014 IEEE International Conference on Robotics and Automation (ICRA) |titlechapter=A new 6-DOF parallel robot with simple kinematic model |date=2014|chapter-url=http://dx.doi.org/10.1109/icra.2014.6907449|journalpages=20144061–4066 IEEE International Conference on Robotics and Automation (ICRA)|publisher=IEEE|doi=10.1109/icra.2014.6907449|isbn=978-1-4799-3685-4|s2cid=18895630 }}</ref> has ''3T3R'' DoF with ''6(<u>P</u>CRS)'' joint topology, with cylindrical ''C'' and spherical ''S'' joints.

=== Isoglide ===

The Isoglide family<ref>{{Cite journal|last=Gogu|first=Grigore|date=2004|title=Structural synthesis of fully-isotropic translational parallel robots via theory of linear transformations|url=http://dx.doi.org/10.1016/j.euromechsol.2004.08.006|journal=European Journal of Mechanics - A/Solids|volume=23|issue=6|pages=1021–1039|doi=10.1016/j.euromechsol.2004.08.006|bibcode=2004EJMS...23.1021G |issn=0997-7538|url-access=subscription}}</ref> <ref>{{Cite journal|last=Gogu|first=Grigore|date=2007|title=Structural synthesis of fully-isotropic parallel robots with Schönflies motions via theory of linear transformations and evolutionary morphology|url=http://dx.doi.org/10.1016/j.euromechsol.2006.06.001|journal=European Journal of Mechanics - A/Solids|volume=26|issue=2|pages=242–269|doi=10.1016/j.euromechsol.2006.06.001|bibcode=2007EJMS...26..242G |issn=0997-7538|url-access=subscription}}</ref><ref>{{Citation|titlechapter=Structural synthesis|date=2008|chapter-url=http://dx.doi.org/10.1007/978-1-4020-5710-6_5|workseries=Solid Mechanics and its Applications |volume=149 |pages=299–328|place=Dordrecht|publisher=Springer Netherlands|doi=10.1007/978-1-4020-5710-6_5 |isbn=978-1-4020-5102-9|access-date=2020-12-14|title=Structural Synthesis of Parallel Robots }}</ref><ref>{{Cite journal|last=Gogu|first=G.|date=2009|title=Structural synthesis of maximally regular T3R2-type parallel robots via theory of linear transformations and evolutionary morphology|url=http://dx.doi.org/10.1017/s0263574708004542|journal=Robotica|volume=27|issue=1|pages=79–101|doi=10.1017/s0263574708004542|s2cid=32809408 |issn=0263-5747|url-access=subscription}}</ref> includes many different Cartesian parallel manipulators from 2-6 DoF.

=== Xactuator ===

[[File:Xactuator real hardware.jpg|thumb|Xactuator]]

The 4-DoF or 5-DoF Coupled Cartesian manipulators family<ref>{{Cite journal|last=Wiktor|first=Peter|date=2020|title=Coupled Cartesian Manipulators|url=http://dx.doi.org/10.1016/j.mechmachtheory.2020.103903|journal=Mechanism and Machine Theory|volume=161 |pages=103903|doi=10.1016/j.mechmachtheory.2020.103903|issn=0094-114X|doi-access=free}}</ref> are gantry type Cartesian parallel manipulators with ''2T2R'' DoF or ''3T2R'' DoF.

== References ==