Digital Private Network Signalling System: Difference between revisions

Revision as of 22:38, 25 April 2024

Latest revision as of 04:01, 30 May 2025

(One intermediate revision by one other user not shown)

Line 1:

The '''Digital Private Network Signalling System''' ('''DPNSS''') is a [[network protocol]] used on digital [[trunk lines]] for connecting to [[PABX]]. It supports a defined set of inter-networking facilities.

{{multiple issues|

{{unreferenced|date=October 2012}}

{{technical|date=October 2017}}

}}

The '''Digital Private Network Signalling System''' ('''DPNSS''') is a [[network protocol]] used on digital [[trunk lines]] for connecting to [[PABX]]. It supports a defined set of inter-networking facilities.

DPNSS was originally defined by [[BT Group|British Telecom]]. The specification for the protocol is defined in BTNR188. The specification currently comes under the Network Interoperability Consultative Committee.

==History==

DPNSS was developed in the early 1980s by [[BT Group|British Telecom]] (BT), or its forerunner, [[Post Office Telecommunications]] in recognition that the emerging Digital Private Circuit Primary Rate product 'Megastream' had to address the market for both data and voice, the latter being significantly greater because of the market for [[Private Branch Exchange|PBX]]s. At the time, BT dictated what signalling could be used on its leased lines and, whilst it only had a minority interest in the sales of PBXs, was requested by the PBX manufacturers to produce a standard to prevent the creation of a plethora of conflicting PBX protocols being developed. Under the [[liberalization]] rules of the day (1979), BT was barred from manufacturing, selling or supplying PBXs of more than 200 extensions. Digital ([[PCM]]-based) PBXs were just starting to come into the marketplace with the [[Plessey|Plessey PDX]] (a licensed version of the [[ROLM|ROLM CBX]]) and the GEC SL1 (a licensed version of the [[Northern Telecom]] SL1). It was recognised that corporate customers would wish to network these systems across the country. At the time, '[[Channel-associated signaling|CAS]]' inter node signaling was slow and inter-register signaling MF5, developed from [[PSTN]] signalling protocols, was complex and would not support sufficient features.

The support for DPNSS as BT's own signalling protocol also differentiated BT's private circuit's services from those of its emerging rival [[Mercury Communications]].

DPNSS was an active (and successful) collaboration between PBX manufacturers and BT which started relatively slowly (BT & Plessey) but quickly snowballed with [[Mitel|MITEL]], [[General Electric Company plc|GEC]], [[Ericsson]], [[Philips]] and eventually Nortel all joining to create a powerful and feature rich protocol.

BT and some of the UK manufacturers championed DPNSS into ECMA and [[CCITT]] (ITU) but it was eventually deprecated by the standards bodies in favour of [[Q931]] and QSig. Nevertheless, the elegance of the protocol and its compatibility with PBX features ensured the adoption DPNSS actually grew in Europe, compared to the much slower take-up of Qsig.

BT and some of the UK manufacturers championed DPNSS into ECMA and [[CCITT]] (ITU) but it was eventually deprecated by the standards bodies in favour of [[Q931]] and QSig. Nevertheless, the elegance of the protocol and its compatibility with PBX features ensured the adoption DPNSS actually grew in Europe, compared to the much slower take-up of Qsig. There were also attempts (during 1984) to take DPNSS into North America. Unfortunately the structures for the creation of standards in North America seemed to prevent manufacturer collaboration as a route forward and the [[ANSI]] standards body was not interested in creating PBX interworking standards.

Version 1 of BTNR188 (DPNSS) was issued in 1983; the last version of DPNSS to be released 6 in 1995 included compatibility with [[ISDN]] features released in V5. A lightweight version of DPNSS 'APNSS' was developed using analogue trunks (Sometimes compressed) and a [[modem]] to support D channel signalling.

==Overview of the Protocol==

Layer 1(CCITT) ITU-G703 defines the physical and electrical interface. G704 defines the Frame structure of the 2,048 Mbs sent across the link. G732 defines the allocation of that frame structure into the 32 discrete 64 Kbit 'channels', of which 0 is used for alignment of the frames and 16 is (by convention only) allocated to common channel signalling. Speech is carried as G711.

Layer 2 Timeslot 16, 64Kbs operates as [[HDLC]] [[LAPB]], to support up to 60 PVCs or [[Data link connection identifier|DLCDLCs]]s (data link connections) (30 directly associated with the bearer channels and 30 for unrelated messages) as the specification describes them. Therefore, at maximum operation, each potential traffic channel can have two simultaneous data channels available for messages. Note that HDLC operates as a statistical [[multiplexing]] system. When traffic deltas are low, a single call establishment message will have access to the full 64Kbs (allowing for overheads).

DPNSS is a layer 3 protocol functioning as common channel signalling. The functionality is divided into Levels (confusingly nothing to do with OSI layers.) Levels 1-6 deal with simple call establishment (make call/break call) and are the minimum requirements by which a PBX can be said to be DPNSS compatible. The remaining levels are allocated to telephony features, supplementary services or to administrative features. Note that support of 'levels' by a PBX is not necessarily incremental. Some levels are interdependent but a PBX may omit support of some levels (above 6) and support others.