Key Code Qualifier: Difference between revisions

Revision as of 16:26, 13 June 2013

Latest revision as of 22:16, 9 December 2024

(21 intermediate revisions by 16 users not shown)

Line 1:

{{Short description|Type of SCSI error code}}

''{{redirect|KCQ redirects here. For |the radio station in Saginaw, Michigan, see [[|WKCQ]]''}}

'''Key Code Qualifier''' is an error-code returned by a [[SCSI]] device.

When a SCSI [[SCSI target|target]] device returns a [[SCSI check condition|check condition]] in response to a [[SCSI command|command]], the [[SCSI initiator|initiator]] usually then issues a [[SCSI Request Sense Command|SCSI Request Sense command]]. This process is part of a SCSI protocol called [[SCSI contingent allegiance condition|Contingent Allegiance Condition]]. The target will respond to the Request Sense command with a set of [[SCSI Request Sense Command|SCSI sense data]] which includes three fields giving increasing levels of detail about the error:

*K - sense key - 4 bits, (byte 2 of Fixed sense data format)

*C - additional sense code (ASC) - 8 bits, (byte 12 of Fixed sense data format)

Line 19 ⟶ 20:

|-

|rowspan="36" valign="top"|Soft Error||1||01||00||Recovered Write error - no index

|-

|1||02||00||Recovered no seek completion

|-

Line 90 ⟶ 91:

|1||5D||00||PFA threshold reached

|-

|rowspan="1315" valign="top"|Not Ready||2||04||00||Not Ready - Cause not reportable.

|-

|2||04||01||Not Ready - becoming ready

Line 113 ⟶ 114:

|-

|2||3A||02||Not Ready - medium not present - tray open

|-

|2||3A||03||Not Ready - medium not present - loadable

|-

|2||3A||04||Not Ready - medium not present - medium auxiliary memory accessible

|-

|2||4C||00||Diagnostic Failure - config not loaded

Line 152 ⟶ 157:

|3||31||01||Medium Error - format command failed

|-

|rowspan="1923" valign="top"|Hardware Error||4||01||00||Hardware Error - no index or sector

|-

|4||02||00||Hardware Error - no seek complete

Line 161 ⟶ 166:

|-

|4||11||00||Hardware Error - unrecovered read error in reserved area

|-

|4||3115||0001||Hardware Error - reassignMechanical failedpositioning error

|-

|4||16||00||Hardware Error - Data Sync Mark error in reserved area

Line 169 ⟶ 176:

|-

|4||19||03||Hardware Error - defect list error in Grown List

|-

|4||31||00||Hardware Error - reassign failed

|-

|4||32||00||Hardware Error - no defect spare available

|-

|4||35||00||Hardware Error - enclosure services failure

|-

|4||35||01||Hardware Error - unsupported enclosure function

Line 183 ⟶ 190:

|-

|4||35||05||Hardware Error - enclosure services checksum error

|-

|4||3E||00||Hardware Error - logical unit has not self configured yet

|-

|4||3E||01||Hardware Error - logical unit failed

|-

|4||3E||02||Hardware Error - timeout on logical unit

|-

|4||3E||03||Hardware Error - self-test failed

|-

|4||3E||04||Hardware Error - unable to update self-test log

|-

|4||44||00||Hardware Error - internal target failure

Line 196 ⟶ 209:

|5||21||00||Illegal Request - LBA out of range

|-

|5||24||00||Illegal Request - invalid field in [[SCSI CDB|CDB]] (Command Descriptor Block)

|-

|5||25||00||Illegal Request - invalid LUN

Line 228 ⟶ 241:

|5||55||04||Illegal Request - Insufficient Registration Resources

|-

|rowspan="2143" valign="top"|Unit Attention||6||28||00||Unit Attention - not-ready to ready transition (format complete)

|-

|6||29||00||Unit Attention - POR or device reset occurred

Line 265 ⟶ 278:

|-

|6||3F||03||Unit Attention - inquiry parameters changed

|-

|6||3F||04||Unit Attention - component device attached

|-

|6||3F||05||Unit Attention - device identifier changed

|-

|6||3F||06||Unit Attention - redundancy group created or modified

|-

|6||3F||07||Unit Attention - redundancy group deleted

|-

|6||3F||08||Unit Attention - spare created or modified

|-

|6||3F||09||Unit Attention - spare deleted

|-

|6||3F||0A||Unit Attention - volume set created or modified

|-

|6||3F||0B||Unit Attention - volume set deleted

|-

|6||3F||0C||Unit Attention - volume set deassigned

|-

|6||3F||0D||Unit Attention - volume set reassigned

|-

|6||3F||0E||Unit Attention - reported LUNs data has changed

|-

|6||3F||0F||Unit Attention - echo buffer overwritten

|-

|6||3F||10||Unit Attention - medium loadable

|-

|6||3F||11||Unit Attention - medium auxiliary memory accessible

|-

|6||3F||12||Unit Attention - iSCSI IP address added

|-

|6||3F||13||Unit Attention - iSCSI IP address removed

|-

|6||3F||14||Unit Attention - iSCSI IP address changed

|-

|6||3F||15||Unit Attention - inspect referrals sense descriptors

|-

|6||3F||16||Unit Attention - microcode has been changed without reset

|-

|6||3F||17||Unit Attention - zone transition to full

|-

|6||3F||18||Unit Attention - bind completed

|-

|6||3F||19||Unit Attention - bind redirected

|-

|6||3F||1A||Unit Attention - subsidiary binding changed

|-

|6||5D||00||Unit Attention - PFA threshold reached

|-

| rowspan="2" |Data Protect

|Write Protect||7||27||00||Write Protect - command not allowed

|7

|20

|02

|Access Denied - No Access Rights

|-

|7||27||00||Write Protect - command not allowed
|-
|rowspan="1314" valign="top"|Aborted Command||B||00||00||Aborted Command - no additional sense code

|-

|B||1B||00||Aborted Command - sync data transfer error (extra ACK)

Line 291 ⟶ 354:

|-

|B||49||00||Aborted Command - inappropriate/illegal message

|-

|B||55||03||Aborted Command - insufficient resources

|-

|B||4B||00||Aborted Command - data phase error