Dynamic amplification factor: Difference between revisions

Revision as of 13:02, 21 August 2014

Latest revision as of 17:12, 31 December 2024

(11 intermediate revisions by 11 users not shown)

Line 1:

'''Dynamic amplificationAmplification factorFactor (DAF)''' or Dynamic Increase Factor (DIF), is a [[dimensionless number]] which describes that by how many times the [[deflection (engineering)|deflections]] or stresses should be multiplied to the deflections or stresses caused by the [[static loadsload]]s when a [[Structural dynamics|dynamic load]] is applied on to a structure.<ref>Dynamics of structures by Anil K Chopra</ref>

{{Dead end|date=August 2014}}

When lifting an object during a sub-sea operation, the DAF is calculated based on dynamic hydraulic forces or on snap-forces. <ref>[https://rules.dnvgl.com/docs/pdf/DNV/codes/docs/2011-04/RP-H103.pdf Modelling and analysis of marine operation] {{Webarchive|url=https://web.archive.org/web/20160304200557/https://rules.dnvgl.com/docs/pdf/DNV/codes/docs/2011-04/RP-H103.pdf |date=2016-03-04 }}, DNV-RP-H103, April 2011</ref>

'''Dynamic amplification factor''' is a dimensionless number which describes that by how many times the deflections or stresses should be multiplied to the deflections or stresses caused by the static loads when a dynamic load is applied on to a structure.<ref>Dynamics of structures by Anil K Chopra</ref>

:<math> DAF = \frac{{F_{total}}}{{Mg}}</math>

Where:

:<math> M </math> is the mass of the object in air (kg)

:<math>g </math> is the acceleration of gravity (9.81m/s2)

:<math>F_{total}</math> is the largest of <math>{F_{static-max} + F_{hyd}} </math> or <math>F_{static-max} + F_{snap}</math> (N)

==References==

{{reflist}}

[[Category:Dimensionless numbers of physics]]

{{Uncategorized|date=June 2014}}

{{physics-stub}}