Selenium rectifier: Difference between revisions

Revision as of 20:57, 9 January 2018

Latest revision as of 09:02, 15 June 2025

(47 intermediate revisions by 30 users not shown)

Line 1:

{{Short description|Type of power rectifier}}

[[File:Selenium Rectifier.jpg|thumb|An 8 plate 160V 450mA Federal brand Selenium Rectifier|224x224px]]A '''selenium rectifier''' is a type of [[metal rectifier]], invented in 1933. They were used in [[power supply|power supplies]] for electronic equipment, and in high current battery charger applications until they were superseded by [[silicon diode]] rectifiers in the late 1960s. The arrival of the [[alternator (automotive)|alternator]] in some automobiles was the result of compact, low cost, high current silicon rectifiers. These units were small enough to be inside the alternator case, unlike the selenium units that preceded silicon devices.

[[File:Selenium Rectifier.jpg|thumb|An 8-plate 160 V 450 mA Federal brand selenium rectifier|224x224px]]

[[File:Selenium Rectifier.jpg|thumb|An 8 plate 160V 450mA Federal brand Selenium Rectifier|224x224px]]A '''selenium rectifier''' is a type of [[metal rectifier]], invented in 1933.<ref>{{Cite book|last1=Hempstead|first1=Colin|url=https://books.google.com/books?id=2ZCNAgAAQBAJ&dq=selenium+rectifier+invented&pg=PA669|title=Encyclopedia of 20th-Century Technology|last2=Worthington|first2=William|date=2005-08-08|publisher=Routledge|isbn=978-1-135-45551-4|pages=669|language=en|quote=selenium rectifiers, which were invented by Charles E. Fitts in 1933}}</ref> They were used in [[power supply|power supplies]] for electronic equipment, and in high -current battery -charger applications until they were superseded by [[silicon diode]] rectifiers in the late 1960s. The arrival of the [[alternator (automotive)|alternator]] in some automobiles was the result of compact, low -cost, high -current silicon rectifiers. These units were small enough to be inside the alternator case, unlike the [[selenium]] units that preceded silicon devices.

The rectifying properties of [[selenium]], amongst other semiconductors, were observed by Braun, Schuster and Siemens between 1874 toand 1883.<ref>[https://books.google.co.ukcom/books?id=JXqKERUAdQcC&pg=PA342&dq=History+Selenium+Rectifier+Willoughby&hlpg=en&sa=X&ved=0ahUKEwiLnOfxp5vXAhWG2BoKHdHbAq8Q6AEINzAD#v=onepage&q=History%20Selenium%20Rectifier%20Willoughby&f=falsePA342 books.google.co.uk]</ref> The photoelectric and rectifying properties of [[selenium]] were also observed by Adams and Day in 1876<ref>[https://books.google.co.ukcom/books?id=N_3uCAAAQBAJ&pg=PA2&lpg=PA2&dq=Adams+Day+1876+Selenium+Rectifier&sourcepg=bl&ots=ECJ9DHBjdr&sig=FKjLMGFdfot_YY4q2AS1v32p28A&hl=en&sa=X&ved=0ahUKEwjR9qPOq5vXAhXGiRoKHeehBVQQ6AEIODAG#v=onepage&q=Adams%20Day%201876%20Selenium%20Rectifier&f=falsePA2 books.google.co.uk]</ref> and C. E. Fitts around 1886, but practical rectifier devices were not manufactured routinely until the 1930s. Compared with the earlier [[coppermetal rectifier|copper-oxide]] rectifier]], the selenium cell could withstand higher voltage, but at a lower current capacity per unit area.<ref>Peter Robin Morris . ''A history of the world semiconductor industry'', IET, 1990, {{ISBN|0-86341-227-0}} , pages 13, 18.</ref>

==Construction==

[[File:Structure selenium rectifier.svg|thumb|Typical structure of a selenium rectifier.{{clarify|contradicts associated text (no Bi/Ni layer)|date=August 2016}}]]

[[Selenium]] rectifiers are made from stacks of [[aluminum]] or [[steel]] plates coated with about 1 &nbsp;[[μm]] of [[bismuth]] or [[nickel]]. A much thicker layer of selenium (50 to 60 &nbsp;μm) which has been doped with a [[halogen]] is deposited on top of the thin metal [[plating]]. The selenium is then converted into polycrystalline gray (hexagonal) form by [[Annealing (metallurgy)|annealing]]. Cadmium selenide forms by reaction of the selenium with the tin-cadmium alloy and the CdSe-Se [[heterojunction]] is the active rectifying junction. Each plate is able to withstand about 20 volts in the [[Peak inverse voltage|reverse direction]]. The metal squares, or disks, also serve as [[heat sink]]s in addition to providing a mounting place for the selenium disks. Plates can be stacked indefinitely to withstand higher voltages. Stacks of thousands of miniature selenium disks have been used as high -voltage rectifiers in [[television set]]s and [[photocopy machine]]s.

==Use==

[[File:MADDIDA Selen Rectifier.JPG|thumb|right|Selenium rectifiers used in 1950s [[MADDIDA]] computer.]]
[[File:Selenium rectifier.agr.jpg|thumb|Selenium rectifier from 1960s. Each plate is 1 -inch square.]]
Selenium rectifiers are able to withstand repetitive significant overload without the need of special protective measures. It is commonly used in electroplating rectifier under 200,000&nbsp;A and electrostatic precipitators operating between 30 and 100&nbsp;kV<ref>{{Cite book |last1=Reeves |first1=E. A. |url=https://books.google.com/books?id=KcI99VbjwPwC&pg=PA95 |title=Newnes Electrical Pocket Book |last2=Heathcote |first2=Martin |date=2013-06-17 |publisher=Taylor & Francis |isbn=978-1-136-37644-3 |pages=95 |language=en}}</ref>

[[Receiver (radio)|Radio]] and television receivers used them from about 1947 to 1975 to provide up to a few hundred volts of plate voltage. Vacuum -tube rectifiers had efficiencies of only 60% compared to the 85% of selenium rectifiers, partially because vacuum -tube rectifiers required heating. Selenium rectifiers have no warm-up time, unlike high -vacuum rectifiers. Selenium rectifiers were also cheaper and simpler to specify and install than vacuum tubes. However, they were later replaced by silicon diodes with high efficiencies (close to 100% at high voltages). Selenium rectifiers had the capability to act as current limiters, which can temporarily protect the rectifier during a short circuit and provide stable current for charging batteries.{{Citation needed |date=January 2022}}

==Properties==

A selenium rectifier is about the same size as coppera copper-oxide rectifiersrectifier, but is much larger than a silicon or germanium diode. Selenium rectifiers have a long but not indefinite service life of 60,000 to 100,000 hours, depending on rating and cooling. The rectifier can show some unforming of the rectifier characteristic after long storage.<ref>Ernst Bleule (ed.), ''Electronic methods'', Academic Press, 1964, {{ISBN|0-12-475902-5}}, pages 206-207206–207.</ref> Each cell can withstand a reverse voltage around 25 volts, and has a forward voltage drop around 1 volt, which limits the efficiency at low voltages. Selenium rectifiers have an [[operating temperature]] limit of 130 &nbsp;°C, and are not suitable for high-frequency circuits.<ref>H. P. Westman (ed), ''Reference Data for Radio Engineers Fifth Edition'', Howard W. Sams & Co., Inc. 1968, chapter 13.</ref>

==Replacement==

Selenium rectifiers had a shorter lifespan than desired. In the early stage of failure they produce a modest amount of sweet-smelling gas, sometimes described as "sickly sweet". At that point the rectification properties are almost totally gone, allowing reverse voltage to leak through the rectifier. During catastrophic failure they producedproduce significant quantities of malodorous and highly toxic fumes[[hydrogen selenide]]<ref>{{Cite journal |date=1950-08-22 |title=Constitution and mechanism of the selenium rectifier photocell |url=https://royalsocietypublishing.org/doi/10.1098/rspa.1950.0112 |journal=Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences |language=en |volume=202 |issue=1071 |pages=449–466 |doi=10.1098/rspa.1950.0112 |bibcode=1950RSPSA.202..449P |issn=0080-4630 |last1=Preston |first1=J. S. |s2cid=93164294 |url-access=subscription }}</ref><ref>{{Cite web |last= |year=1978 |title=Occupational Health Guideline for Hydrogen Selenide |url=https://www.cdc.gov/niosh/docs/81-123/pdfs/0336.pdf |access-date=2022-10-01 |website=cdc.gov}}</ref><ref>{{Cite web |last=PubChem |title=Hydrogen selenide |url=https://pubchem.ncbi.nlm.nih.gov/compound/533 |access-date=2022-10-01 |website=pubchem.ncbi.nlm.nih.gov |language=en}}</ref> that let the repair technician know what the problem was. By far the most common failure mode was a progressive increase in forward resistance, increasing forward [[voltage drop]] and reducing the rectifier's efficiency. During the 1960s they began to be superseded by [[silicon rectifiers]], which exhibited lower forward [[voltage drop]], lower cost, and higher reliability.<ref>[http://pubs.usgs.gov/of/2003/of03-018/of03-018.pdf Selenium], U.S. Department of the Interior].</ref> They are still manufactured for exact replacement purposes but are not designed into new equipment.

==Selenium diode computer logic==

In 1961 IBM started developing a low -speed computer logic family<ref>[https://wwwpatents.google.com/patentspatent/US3218472 US Patent 3218472]: Transistor switch with noise rejection provided by variable capacitance feedback diode.</ref> that used selenium diodes with similar characteristics to silicon but cost less than one cent. The [[computer terminal|terminal]] development departments were begging for low cost and didn’tdid not need speed. It was possible to punch eighth 1/8-inch (3.175 mm) discs from a sheet of selenium diode. GE claimed that they could make reliable selenium diodes. They could do better than the three to five year life of selenium rectifiers but TV manufacturers liked the shorter life. {{cn|date=November 2014}} A design was achieved for a DDTL circuit with two levels of [[diode logic]] feeding one [[Alloy-junction transistor|alloy transistor]] and no series input resistor or speed -up capacitor. The family was called SMAL<ref name="ibm" /> or SMALL, for Selenium"selenium Matrixmatrix ALloyalloy Logiclogic". The alloy transistor proved to be too fast for the selenium diode [[Diode#Reverse-recovery. effect|recovery]]. To solve this problem, a selenium diode was connected around the base-emitterbase–emitter to slow it down. The two -level logic was similar to the PLAs Programmableprogrammable logic array (PLA) that would come on the market many years later. Nearly any static logic function that yielded one output could be achieved with one transistor and a handful of cheap diodes. Several years later the selenium diodes indeed were found to be not reliable and were replaced by silicon diodes. The logic family was packaged on [[IBM Standard Modular System|SMS cards]].<ref name="ibm">{{cite book |title=The 1060 Data Communications System |publisher=IBM |page=2 |url=http://ed-thelen.org/comp-hist/IBM-ProdAnn/1060.pdf}}</ref>

==Further reading==

* ''F.T. Selenium Rectifier Handbook''; 2nd Ed; Federal Telephone and Radio; 80 pages; 1953. <small>[https://www.americanradiohistory.com/Archive-Bookshelf/Technology/Federal-Selenium-Rectifier-2nd-1953.pdf (archive)]</small>

* ''S.T. Selenium Rectifier Handbook''; 1st Ed; Sarkes Tarzian; 80 pages; 1950. <small>[https://archive.org/details/Selenium_Rectifier_Handbook_Sarkes-Tarzian_Company/ (archive)]</small>

==References==

Line 25 ⟶ 36:

[[Category:Diodes]]

[[Category:Selenium]]

[[Category:Electrical components]]

[[Category:Rectifiers]]