Lumped-element model: Difference between revisions

Revision as of 09:59, 7 July 2023

Revision as of 10:01, 7 July 2023

Line 159:

A simplifying assumption in this ___domain is that all heat transfer mechanisms are linear, implying that radiation and convection are linearised for each problem.

Several publications can be found that describe how to generate lumped-element models of buildings. In most cases, the building is considered a single thermal zone and in this case, turning multi-layered walls into lumped elements can be one of the most complicated tasks in the creation of the model. The dominant-layer method is one simple and reasonably accurate method.<ref>Ramallo-González, A.P., Eames, M.E. & Coley, D.A., 2013. Lumped Parameter Models for Building Thermal Modelling: An Analytic approach to simplifying complex multi-layered constructions. Energy and Buildings, 60, pp.174-184.</ref> In this method, one of the layers is selected as the dominant layer in the whole construction, this layer is chosen considering the most relevant frequencies of the problem. In his thesis,<ref>Ramallo-González, A.P. 2013. Modelling Simulation and Optimisation of Low-energy Buildings. PhD. University of Exeter.</ref>

Lumped-element models of buildings have also been used to evaluate the efficiency of domestic energy systems, by running many simulations under different future weather scenarios.<ref>Cooper, S.J.G., Hammond, G.P., McManus, M.C., Ramallo-Gonzlez, A. & Rogers, J.G., 2014. Effect of operating conditions on performance of domestic heating systems with heat pumps and fuel cell micro-cogeneration. Energy and Buildings, 70, pp.52-60.</ref>