Open-loop gain: Difference between revisions

Revision as of 05:03, 14 March 2013

Revision as of 06:21, 19 July 2013

Line 1:

{{Unreferenced stub|auto=yes|date=December 2009}}

The '''open-loop [[gain]]''' of an [[operational amplifier]] is the [[gain]] obtained when no [[feedback]] is used in the [[electrical network|circuit]].

Open loop gain is usually exceedingly high; in fact, an ideal operational amplifier has infinite open-loop gain. Typically an op-amp may have an open-loop gain of around <math>10^5</math>. Normally, feedback is applied around the op-amp so that the gain of the overall [[electrical network|circuit]] is defined and kept to a figure which is more usable. However the very high gain of the op-amp enables considerable levels of feedback to be applied to achieve required performance. The open-loop gain of an operational amplifier falls very rapidly with increasing [[frequency]]. Along with [[slew rate]], this is one of the reasons why operational amplifiers have limited [[Bandwidth (signal processing)|bandwidth]].