Parallel mesh generation: Difference between revisions

Revision as of 15:18, 30 May 2013

Revision as of 22:41, 23 October 2014

Line 24:

Another parallel mesh generator is '''D3D''',<ref>[http://mech.fsv.cvut.cz/~dr/d3d.html D3D Mesh Generator Web page]</ref> was developed by Daniel Rypl<ref>University Web page of Daniel Rypl, http://mech.fsv.cvut.cz/~dr/</ref> at Czech Technical University in Prague. '''D3D''' is a mesh generator capable to discretize in parallel (or sequentially) 3D domains into mixed meshes.

BOXERMesh <ref>[http://www.cambridgeflowsolutions.com/en/products/boxer-mesh.html BOXERMesh]</ref> is a parallel octree mesh generator <ref>[http://www.cambridgeflowsolutions.com/uploads/2009_Scalable%20parallel%20mesh%20generation_AIAA_0981.pdf Scalable Parallel Mesh Generation]</ref> developed by Cambridge Flow Solutions.<ref>[http://www.cambridgeflowsolutions.com.html Cambridge Flow Solutions]</ref> Implemented as distributed-memory fully parallelised software, it is specifically designed to overcome the traditional bottlenecks constraining engineering simulation, delivering advanced meshing on geometries of arbitrary complexity and size. Its scalability has been demonstrated on very large meshes generated on HPC clusters.

== Challenges in parallel mesh generation ==