Content deleted Content added
superfluous 's' |
m Disambiguate Hayes to Hayes Microcomputer Products using popups; formatting: whitespace (using Advisor.js) |
||
Line 14:
===DTR configurability on modems===
Virtually all modems new enough to support error correction and data compression (all modems 9600 bit/s and above, and some 2400 bit/s ones as well) have the capability of modifying their use of RS-232 signals, depending on the application.{{Citation needed|date=November 2009}} The [[AT command]] for manipulating DTR is typically <code>AT&D</code> followed by a single digit.<ref>{{Citation |title=The Extended Hayes Command Set | publisher=[[KDE]] |url=http://docs.kde.org/stable/en/kdenetwork/kppp/hayes-extended-commands.html |accessdate=2009-11-23 }}</ref> AT&D0 and AT&D2 are mandatory under V.250, and AT&D1 is optional.<ref name="V250_6_2_9" >{{Citation |title=V.250 : Serial asynchronous automatic dialling and control (05/99, 07/03) |chapter=6.2.9 Circuit 108 (data terminal ready) behaviour |publisher=[[ITU-T]]/Telecommunication Standardization Bureau |url=http://www.itu.int/rec/T-REC-V.250/en |format=PDF}}</ref> AT&D3 is non-standard but widely implemented,<ref name="USR_Courier_Ch8">{{Citation |title=Courier V-Everything Command Reference |publisher=[[U.S. Robotics]] |url=http://www.usr.com/support/3453b/3453b-crg/chap%208-controlling%20EIA-232.htm |chapter=8. Controlling EIA-232 Signaling |accessdate=2009-11-23 }}</ref><ref name="MS_PnP_1995" >{{Citation |title=PnP for COM Devices, rev 0.92 |format=RTF |publisher=[[Microsoft]] and [[Hayes Microcomputer Products|Hayes]] |url=http://download.microsoft.com/download/1/6/1/161ba512-40e2-4cc9-843a-923143f3456c/pnpcom.rtf |date=February 28, 1995 |chapter=A.4 AT&D3 Implementation Issues }}</ref> and higher values are used by some vendors.<ref>{{Citation |title=Alpha Micro GPRS Modem Functional Overview 1.0|url=http://www.alphamicro.net/resources/GPRS_functional_overview.pdf |accessdate=2009-11-23 |year=2003 |author=Nick Robins |publisher=Alpha Micro Components |format=PDF}}</ref>
* '''AT&D''' or '''AT&D0''' - Ignore DTR signal. A call will continue regardless of the DTR line, and the only way to end the call is with the escape sequence, or if it gets terminated by the other side. This setting is only used if the computer equipment cannot provide or control DTR.
Line 31:
==Use for flow control==
On some printers with serial interfaces, the DTR line is used for hardware [[flow control (data)|flow control]], similar to the use of RTS and CTS for modems. This practice is not consistent; other printers define RTS for this same purpose.
When DTR is used for flow control, it manages the flow of data from the printer to the computer. However, because during printing, the bulk of the data is from the computer to the printer, the importance of flow control in the opposite direction is minimal.
| |||