Push–pull output: Difference between revisions

Revision as of 06:27, 1 February 2021

Revision as of 23:49, 17 March 2021

Line 60:

=== Push–pull tube (valve) output stages ===

{{seeSee also|Valve audio amplifier – technical#The push–pull power amplifier}}

[[Vacuum tube]]s (valves) are not available in complementary types (as are pnp/npn transistors), so the tube push–pull amplifier has a pair of identical output tubes or groups of tubes with the [[control grid]]s driven in antiphase. These tubes drive current through the two halves of the primary winding of a center-tapped output transformer. Signal currents add, while the distortion signals due to the non-linear [[Current–voltage characteristic|characteristic curve]]s of the tubes subtract. These amplifiers were first designed long before the development of solid-state electronic devices; they are still in use by both [[audiophile]]s and musicians who consider them to sound better.

Line 67:

A '''Single Ended Push–Pull''' ('''SEPP''', '''SRPP''' or '''mu-follower'''<ref>{{cite web|title=SRPP Decoded|url=http://www.tubecad.com/may2000/|website=The Tube CAD Journal|access-date=7 November 2016}}</ref>) output stage, originally called the '''Series-Balanced amplifier''' (US patent 2,310,342, Feb 1943). is similar to a totem-pole arrangement for transistors in that two devices are in series between the power supply rails, but the input drive goes ''only to one of the devices,'' the bottom one of the pair; hence the (seemingly contradictory) Single-Ended description. The output is taken from the cathode of the top (not directly driven) device, which acts part way between a constant current source and a cathode follower but receiving some drive from the plate (anode) circuit of the bottom device. The drive to each tube therefore might not be equal, but the circuit tends to keep the current through the bottom device somewhat constant throughout the signal, increasing the power gain and reducing distortion compared with a true single-tube single-ended output stage.

The '''White Cathode Follower''' (Patent 2,358,428, Sep. 1944 by E. L. C. White) is similar to the SEPP design above, but the signal input is to the ''top'' tube, acting as a cathode follower, but one where the bottom tube (in common cathode configuration) if fed (usually via a step-up transformer) from the current in the plate (anode) of the top device. It essentially reverses the roles of the two devices in SEPP. The bottom tube acts part way between a constant current sink and an equal partner in the push–pull workload. Again, the drive to each tube therefore might not be equal.

Transistor versions of the SEPP and White follower do exist, but are rare.

Line 79:

*[[Open collector]]

== References ==

{{Reflist}}