Content deleted Content added
Citation bot (talk | contribs) Add: date, title. Changed bare reference to CS1/2. | Use this bot. Report bugs. | Suggested by BrownHairedGirl | Linked from User:BrownHairedGirl/Articles_with_bare_links | #UCB_webform_linked 94/2846 |
m remove square brackets from bare URL inline refs. The URL is much more helpful than a random number |
||
Line 2,757:
| A USB board for breadboarding, manufactured and sold as a kit by Fundamental Logic.
|-
| IMUduino<ref name="IMUduino-About">
| Femtoduino.com<ref name="Femtoduino">
|
| ATmega32U4
Line 2,797:
| [[File:Jeenode-v6.jpg|alt=JeeNode|left|frameless]]Low-cost, low-size, radio-enabled Arduino-compatible board running at 3.3 V. Inspired by the Modern Device RBBB (above) with a HopeRF RFM12B wireless module and a modular I/O design supporting a wide range of interfaces.<ref name="Auto7L-72" />
|-
| LCDuino<ref name="LCDuino-About">
| Geppetto Electronics
|
Line 2,855:
|
|
| [[File:MoteinoR4.jpg|alt=Moteino|left|frameless]] An SD-card size wireless-enabled breadboard friendly Arduino compatible board running at 16 MHz/3.3 V. It can mate with either an RFM12B or RFM69W/HW/CW transceiver from HopeRF, allowing very low cost wireless communication (also available without a transceiver). [[File:Moteino_types_&_options.jpg|right|frameless|These are the different types of available Moteino boards and their transceiver options.]] Programmable from the Arduino IDE through an FTDI cable/adapter, or directly through the USB interface (Moteino-USB revision). Moteino runs DualOptiboot,<ref name="DualOptiboot-About">
|-
| NavSpark<ref name="NavSpark" />
Line 3,232:
| Similar to a USB key.
|-
| Teensy 2.0<ref>
| [http://www.pjrc.com PJRC]
|
| ATmega32U4 8 bit AVR 16 MHz <ref name="pjrc_teensy">
|16 MHz
|
Line 3,259:
}} Boards from PJRC.com that run most Arduino sketches using the Teensyduino software add-on to the Arduino IDE.
|-
| Teensy 2.0++<ref>
| [http://www.pjrc.com PJRC]
|
Line 3,286:
}}A slightly more powerful version of the Teensy 2.0. It has 46 I/O pins; 8 KB RAM; 128 kB of flash; 10-bit ADC; UART, SPI, I²C, I²S, Touch and other I/O capability.
|-
| Teensy 3.0<ref>
| [http://www.pjrc.com PJRC]
|
Line 3,306:
| A very small board based on the Freescale MK20DX128VLH5 CPU. It has 34 I/O pins; 16 KB RAM; 128 kB of flash; 16-bit ADC; 3xUARTs, SPI, I²C, I²S, Touch and other I/O capability. Version 3.0 is not recommended for new designs.
|-
| Teensy 3.1/3.2<ref>
| [http://www.pjrc.com PJRC]
|
| |||