Advanced process control: Difference between revisions

Revision as of 02:22, 4 February 2024

Revision as of 03:52, 25 March 2025

Line 1:

{{Refimprove|date=January 2017}}

In [[control theory]], '''advanced process control''' (APC) refers to a broad range of techniques and technologies implemented within industrial process control systems. Advanced process controls are usually deployed optionally and in addition to ''basic'' process controls. Basic process controls are designed and built with the process itself, to facilitate basic operation, control and automation requirements. Advanced process controls are typically added subsequently, often over the course of many years, to address particular performance or economic improvement opportunities in the process.

[[Process control]] (basic and advanced) normally implies the process industries, which includesinclude chemicals, petrochemicals, oil and mineral refining, food processing, pharmaceuticals, power generation, etc. These industries are characterized by continuous processes and fluid processing, as opposed to discrete parts manufacturing, such as automobile and electronics manufacturing. The term [[process automation]] is essentially synonymous with process control.

Process controls (basic as well as advanced) are implemented within the process control system, which may mean a [[Distributed control system|distributed control system (DCS)]], [[Programmable logic controller|programmable logic controller (PLC)]], and/or a supervisory control computer. DCSs and PLCs are typically industrially hardened and fault-tolerant. Supervisory control computers are often not hardened or fault-tolerant, but they bring a higher level of computational capability to the control system, to host valuable, but not critical, advanced control applications. Advanced controls may reside in either the DCS or the supervisory computer, depending on the application. Basic controls reside in the DCS and its subsystems, including PLCs.