Fast Flow Extinguishers: Difference between revisions

Revision as of 04:36, 4 June 2007

Revision as of 07:29, 11 June 2007

Line 1:

Commonly referedreferred to as "Fast Flow" or "High Performance" extinguishers. Available in 13.2 lb., 20lb., and 30lb. capacites and contain [[ABC Dry Chemical]], [[Purple-K]], or [[Sodium Bicarbonate]]. They are currently manufactured by Ansul in cartridge-operated form and Amerex in stored pressure design.

=== UL Rating Diffrences for "Fast Flow" ===

These extinguishers have a higher dry chemical flow rate then conventional extinguishers. In other words a fast flow extinguishers expelles a higher volume of agent in less time than a standard compliance flow extinguisher. As a result fast flow extinguishers have lower [[UL]] class A&B ratings than compliance flow extinguishers(the class B numerical rating is the aproximate square feet of burning fuel a [[novice]] operator could expect to extinguish). UL Class B tests are conducted on fuel in depth fires in what is known as a burn pan. Burn pans come in various

sizes(square feet) in relation to what UL rating a extinguisher will recivereceive for sucessfullysuccessfully extinguishing it. The larger the burn pan fire, the larger the rating and the longer the extinguisher must discharge to be able to handle the larger volume of fire before running out. For a given size extinguisher the resulting effect is a lower flow rate, resulting in a higher UL rating.

''GeneralyGenerally for same size extinguishers(agent capacity)''

-High UL rating = Low flow rate

Line 17:

In the revised NFPA 10 section "2-3 "Application for Specific Hazards" requires "fast flow" extinguishers in locations containing pressurized flammable liquids and pressurized flammable gas And areas with three dimensional class B hazards. Pressurized gas and three dimensional fires require higher flow rates then standard extinguishers in order to be extinguished. The higher flow rate puts more agent onto the fire quicker and results in in a faster "knock-down" of the fire. Higher flow rates also provide more operator protection by putting a "heavier" stream of dry chemical in between the operator and fire. This creates a temporay "heat shield" as long as the agent is being discharged because of the light color of the agent it reflects most of the radient heat back away from the operator.

[[Category:Firefighting equipment]]