Addyman Zephyr: Difference between revisions

Revision as of 21:16, 4 July 2011

Revision as of 22:02, 4 July 2011

Line 29:

==Design==

Erik Addyman designed and built the single seat Zephyr, his first design, in 1933. It was intended as a lightwinglight wind sailplane, combining a wing of modest aspect ratio with a nacelle cockpit and a truss girder fuselage of the kind more common on primary gliders. It was a wooden structured, largely [[aircraft fabric (aircraft)covering|fabric]] covered aircraft.<ref name=Ellison/>

The two [[spar]] wing had a straight [[leading edge]] and constant [[chord]] out to a little over half span, where trailing edge of the [[ailerons]], set at a slight angle to the spar, curved inwards. It was wire braced form above with pairs of wires from the spars to a central, inverted V strut pylon and below by wires to the lower nacelle [[longerons]]. There were no [[flap (aircraft)|flaps]] or [[Air brake (aircraft)|airbrakes]]. The central wing rib was continued rearward with the the upper member of the open, flat, converging [[Warren girder]] fuselage, whose lower member joined the keel of the [[plywood]] and fabric covered nacelle just aft of the wing trailing edge. This placed the open single cockpit just forward of the wing leading edge. A central keel skid formed the main [[undercarriage]], with assistance from a tail bumper.<ref name=Ellison/>

A narrow span, triangular [[tailplane]], wire braced above and below, carried longer span [[elevator (aircraft)|elevators]] with rounded tips and a cut-out for the deep, rounded [[rudder]] hinged to small, triangular fin.<ref name=Ellison/>

==Operational history==

<!-- ==Variants== -->