Simulation table: Difference between revisions

Revision as of 15:14, 21 December 2011

Revision as of 15:14, 21 December 2011

Line 1:

#REDIRECT [[simulation table]]

[[Image:Multi Axis Shaker Table.jpg|thumb|A modern Multi Axis Shaker table]]

A '''multi-axis shakersimulation table''' or '''MAST''' is an automotive test system specifically designed for the high-frequency testing of vehicle components. TheseIt testis systemssometimes consistalso of [[hexapod]] platform with a low resonance table on top. The test system can be used to simulate any kind of vibration in all six degrees of freedom. The movements of the test system are tightly controlled bycalled a [[digitalMulti-Axis testShaker controllerTable]] or MAST.

They can simulate acceleration and displacement outputs and reproduce key data collected on proving grounds, by providing a full six degrees of freedom (6 DOF).

These test systems consist of [[hexapod]] platform with a low resonance table on top. The test system can be used to simulate any kind of vibration in all six degrees of freedom.

The movements of the test system are tightly controlled by a [[digital test controller]].

Simulation tables can be either electrical or hydraulical. Electric simulation table usually achieve a frequency range up to 25 Hz with a maximum payload of around 500 kilograms.

For higher payloads or frequencies hydraulic simulation tables are used.

Low frequency hydraulic simulation tables can easily reach 50 Hz, while specialized high frequency simulation tables can reach in excess of 100 Hz, with more than 14 g of vertical acceleration to payloads beyond 680 kg (1,500 lbs).

{{automotive-tech-stub}}