TCP/IP model: Difference between revisions

Revision as of 07:47, 27 March 2012

Revision as of 07:48, 27 March 2012

Line 18:

* [[Robustness Principle]]: "In general, an implementation must be conservative in its sending behavior, and liberal in its receiving behavior. That is, it must be careful to send well-formed datagrams, but must accept any datagram that it can interpret (e.g., not object to technical errors where the meaning is still clear)." <ref>[http://www.ietf.org/rfc/rfc0791.txt?number=791 p.23 INTERNET PROTOCOL DARPA INTERNET PROGRAM PROTOCOL SPECIFICATION September 1981 Jon Postel Editor]</ref> "The second part of the principle is almost as important: software on other hosts may contain deficiencies that make it unwise to exploit legal but obscure protocol features." <ref>[http://tools.ietf.org/html/rfc1122#page-12 Requirements for Internet Hosts -- Communication Layers p.13 October 1989 R. Braden, Editor]</ref>

Even when the layers are examined, the assorted architectural documents—there is no single architectural model such as ISO 7498, the OSI reference model—have fewer and less rigidly-defined layers than the OSI model, and thus provide an easier fit for real-world protocols. In point of fact, one frequently referenced document, RFC 1958, does not contain a stack of layers. The lack of emphasis on layering is a strong difference between the IETF and OSI approaches. It only refers to the existence of the "internetworking layer" and generally to "upper layers"; this document was intended as a 1996 "snapshot" of the architecture: "The Internet and its architecture have grown in evolutionary fashion from modest beginnings, rather than from a Grand Plan. While this process of evolution is one of the main reasons for the technology's success, it nevertheless seems useful to record a snapshot of the current principles of the Internet architecture."

RFC 1122, entitled ''Host Requirements'', is structured in paragraphs referring to layers, but the document refers to many other architectural principles not emphasizing layering. It loosely defines a four-layer model, with the layers having names, not numbers, as follows: