Troubleshooting from Device Manager: Difference between revisions

Revision as of 02:02, 31 May 2012

Revision as of 02:04, 31 May 2012

Line 23:

* Code 3 - The driver for this device may be corrupted, or your system may be running low on memory.

* Code 10 - This device cannot start.

* Code 12 - Not enough resources for the device. If you want to use this device, you will need to disable one or more other devices on your system.

* Code 14 - You must restart your computer for the device to work properly.

* Code 16 - Windows can't identify all the resources this device requires.

* Code 18 - Drivers for this device must be reinstalled.

* Code 19 - Configuration information in [[Windows registry]] is damaged or corrupted for this device. Uninstall and reinstall this device to solve this problem.

* Code 21 - Windows is removing this device.

* Code 22 - This device is disabled.

Line 36:

* Code 32 - A driver for this device has been disabled.

* Code 33 - Windows cannot determine which resources are required for this device.

* Code 34 - Windows cannot determine the settings for this device. Consult the documentation that came with this device and use the Resource tab to set the configuration.

* Code 35 - Your computer's firmware does not include enough information to properly configure and use this device. To use this device, contact your computer manufacturer to obtain a firmware or BIOS update.

* Code 36 - This device is requesting a [[PCI interrupt]] but is configured for an [[ISA interrupt]] (or vice versa). Use the computer's system setup program to reconfigure the interrupt for this device.

* Code 37 - Windows failed to initialize the device driver for this hardware.

* Code 38 - Windows cannot run the driver for this device because a previous instance of the driver exists.

Line 44:

* Code 40 - Windows cannot access this hardware because its service key information in the registry is missing or corrupted.

* Code 41 - Windows successfully loaded the device driver for this hardware but cannot find the hardware device.

* Code 42 - Windows cannot run the driver for this device because there is a duplicate device already running in the system. (Code 42)

* Code 43 - Windows has stopped this device because it has reported problems.

* Code 44 - An application or service has shut down this hardware device.

Line 50:

* Code 46 - Windows cannot gain access to this hardware device because the operating system is in the process of shutting down.

* Code 47 - Windows cannot use this device because it has been prepared for safe removal, but it has not been removed from the computer.

* Code 48 - The driver for this device has been blocked from starting because it is known to have problems with Windows. Contact the hardware vendor for a new driver.

* Code 49 - Windows cannot start new hardware devices because the [[system hive]] is too large and exceeds the Registry Size Limit.

* Code 52 - Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source.

==See Also==