Shape factor (image analysis and microscopy): Difference between revisions

Revision as of 19:17, 24 April 2015

Revision as of 19:33, 24 April 2015

Line 1:

{{seealsoother uses|Shape factor}}

'''Shape factors''' are [[Dimensionlessdimensionless quantity|dimensionless quantities]] used in [[image analysis]] and [[Microscope|microscopy]] that numerically describe the shape of a particle, independent of its size. Shape factors are calculated from measured [[dimension]]s, such as [[diameter]], [[Chord (geometry)|chord]] lengths, [[area]], [[perimeter]], [[centroid]], [[Moment (mathematics)|moments]], etc. The dimensions of the particles are usually [[Measure (mathematics)|measured]] from two-dimensional [[Cross section (geometry)|cross-sections]] or [[Orthographic projection|projections]], as in a microscope field, but shape factors also apply to three-dimensional objects. The particles could be the grains in a [[Metallography|metallurgical]] or [[Ceramography|ceramic microstructure]], or the microorganisms in a [[Microbiological culture|culture]], for example. The dimensionless quantities often represent the degree of [[Deviation (statistics)|deviation]] from an ideal shape, such as a [[Roundness (object)|circle]], sphere or equilateral [[polyhedron]].<ref>L. Wojnar & K.J. Kurzydłowski, et al., ''Practical Guide to Image Analysis'', [[ASM International (society)|ASM International]], 2000, p 157-160, ISBN 0-87170-688-1.</ref> Shape factors are often ''normalized'', that is, the value ranges from zero to one. A shape factor equal to one usually represents an ideal case or maximum symmetry, such as a circle, sphere, square or cube.

==Aspect ratio==

*The most common shape factor is the [[aspect ratio]], a function of the largest diameter and the smallest diameter [[Orthogonality|orthogonal]] to it:

:<math>A_R = \frac{d_\min}{d_\max}</math>

The normalized aspect ratio varies from approaching zero for a very elongated particle, such as a grain in a cold-worked metal, to near unity for an [[wikt:equiaxed|equiaxed]] grain. The reciprocal of the right side of the above equation is also used, such that the AR varies from one to approaching infinity.

==Circularity==

Line 50:

:<math>f_\text{circ} = \frac {4 \pi (2166086)} {39330^2} = 0.0176.</math>

The aspect ratio is agreeable with an eyeball-estimate on a globe. Such an estimate on a typical flat map, using the [[Mercator projection]], would be less accurate due to the distortiondistorted ofscale at high- [[latitude]] [[Orthographic projection (cartography)|projections]]s. The circularity is deceptively low, due to the [[fjord]]s that give Greenland a very jagged coastline (see the [[Coastlinecoastline paradox|coastline]]). A low value of circularity does not necessarily indicate a lack of symmetry, and shape factors are not limited to microscopic objects.

==References==