In order to decrease the average I/O power dissipation for wide buses the observation that the Busbus-Invertinvert method performs better for small nbus sizes can be used to partition the bus into several narrower subbuses. Each of these subbuses can then be coded independently with its own invert signal. For example a 64-bit bus could be partitioned into eight 8-bit subbuses with a total of eight n order to decrease the average I/O power dissipation for wide buses the observation that the Bus-Invert method performs better for small n can be used to partition the bus into several narrower subbuses. Each of these subbuses can then be coded independently with its own invert signal. For example a 64-bit bus could be partitioned into eight 8-bitsubbuses with a total of eightadded invert signals. Because of the assumption that the data to be transferred over the wide bus is random[[uniform distribution|uniformly distributed]], the statistics for the narrower subbuses will be [[Independence (probability theory)|independent]] and the sequence of data for each subbus will be random uniformly distributed. For example for a 64-bit bus partitioned into eight 8-bit subbuses the average number of transitions per time-slot will be 26.16 (8 times 3.27, the average for one 8-bit subbus) and the average number of transitions per bus-line per time-slot will be .41 (as for an 8-bit bus with one invert line). The maximum number of transitions is not improved by partitioning the bus and remains the same at n/2. However, there is always an extra overhead of using more lines, but computationally, it has been found that the inversion bus encoding works well for most purposes.<ref name="r1">http://citeseerx.ist.psu.edu/viewdoc/download?doi=10.1.1.89.2154&rep=rep1&type=pdf</ref>
