Loop bin duplicator: Difference between revisions

Revision as of 22:50, 15 November 2016

Revision as of 22:53, 15 November 2016

Line 10:

== Analog loop bin duplicator ==

An analog loop bin uses a long loop of either 1/2" wide (for cassette duplication) or 1" wide (for 8-track tape duplication) loaded in a large bin located in the front of the machineduplicator. TheThis loop master tape is loaded into the machineduplicator's bin from a traditional open-reel of tape, where the program material has been recorded to it using a studio-type multitrack tape recorder in real-time beforehand. The loop tape for cassette duplication has 4 tracks on the loop bin master tape (2 stereo tracks for Side A recorded in one direction, and the other 2 for Side B recorded in the opposite direction), and for 8-tracks has all of the 8 tracks (4 2-track stereo programs) recorded in one direction. The loop-bin master tape is read by the duplicator at a very high speed. For cassettes, either 32, 64, 80, or 100 times the normal speed of playback (1.875 [[inches per second|ips]]) of an audio cassette (60, 120, 150, and 187.5 ips respectively) is used, and 10 or 20 times the normal speed of playback (3.75 ips) is used for 8-track duplication (37.50 and 75 ips respectively).

While this loop is being played back, the audio signals for the A and B side (or all 4 programs for 8-track) are sent to a "slave" recorder or an audio bus that contains multiple "slaves". The "slave" records from the loop bin master tape the 4 tracks for both A and B sides to a reel of raw 1/8" audio tape (for cassettes) or all 8 tape tracks to back-lubricated 1/4" audio tape (for 8-track cartridges) wound on a "pancake" reel (similar to [[film|motion picture film]] wound on a plastic core) at the same high speed. After it is recorded, this pancake of tape is then loaded onto special machines called loaders. For cassettes, the loader has cassette shells containing only a leader called "C-0" cassettes that are loaded one at a time or into a hopper where the C-0s are fed automatically depending on the type of loader. The tape from the pancake is then spliced onto the C-0 cassette's leader and then wound into the cassette by the loader. For 8-tracks, the tape is wound from the slave recorder onto a device mounted on its side, called a "sidewinder", which holds several small reels, and extracts and winds the tape from the slave recorder onto each reel into an endless-loop configuration (with the tape being pulled from the center of the wind), where each full reel is then placed in an empty 8-track cartridge and spliced together, either by machine or by hand, with a foil splice that holds the loop together. The foil splice also serves to automatically engage an 8-track player to advance to the next program when played.