Vector inversion generator: Difference between revisions

Revision as of 15:00, 17 March 2017

Revision as of 00:22, 15 July 2017

Line 3:

==Construction==

Discrete component VIGs (pictured) consist of a stack of well-coupled common mode chokes interconnected with a stack of capacitors,. theyThe areinductors conceptuallypresent equivalenta high inductance to currents that are in-phase in the distributedtwo componentwindings, spiraland VIGa far lower inductance when the winding currents are flowing in opposite directions. The capacitors are charged with alternating polarity and when the switch (usually a triggered or free running spark gap in practice) is closed the voltage accross every second capacitor rapidly inverts inas polaritya duehalf tocycle theof lowoscillation reactanceat seena byfrequency aset differentialby currentthe flowingcapacitance throughresonating with the commondiffernetial mode inductance of the chokes. At the same whereastime the other capacitors discharge very slowly due to not having a differential current flowing to cancel the reactance. Discrete components allow large capacitors to be used thus storing much more energy, but cannot provide the high multiplication ratios and extremely short rise times of spiral transmission line types.

So after a half period, all the capacitors are in series and the voltages add.

This arrangement has a conceptual equivalence to the distributed component spiral VIG, with the alternating capacitors representin the two transmission lines of alternating polarity and the spiral turns representing successive stacked stages.

Discrete components allow large lumped capacitors to be used thus storing much more energy, but have difficualty replicating the high voltage multiplication ratios and extremely short rise times of spiral transmission line types.

A spiral VIG consists of four alternating conductor-insulator-conductor-insulator sheets, wound into a cylinder, forming a [[capacitor]] also acting as a single-ended [[transmission line]], connected to a [[spark gap]] switch. The capacitor is charged from a power source, e.g. the EDFEG, then the spark gap fires after its [[breakdown voltage]] is reached. The [[electromagnetic wave]] created by the [[electric spark]] discharge travels along the transmission line, converting [[electrostatic field]] to [[electromagnetic field]], then after reflecting from the open end converts back to electrostatic field. A pulse of output amplitude 2nU (where n is the number of turns of the capacitor and U is the initial voltage it was charged to) and a rise time equal to twice the [[electrical length (transmission medium)|electrical length]] of the transmission line.<ref>http://scholarsmine.mst.edu/post_prints/pdf/physics_09007dcc80588630.pdf</ref><ref>http://www.boliven.com/patent/US7151330/drawings</ref><ref>http://shadaly.com/vector_inversion_generator_4507567.html</ref> The device acts as a distributed [[pulse forming network]].