Code Composer Studio: Difference between revisions

Revision as of 15:02, 28 May 2019

Revision as of 19:16, 10 July 2019

Line 94:

Up until release 4.x, CCS supported only XDS emulators. With the integration of [[MSP430]] and Stellaris microcontrollers, support was added for their respective [[JTAG]] debug probes: MSP-FET430 (both parallel and USB versions) and ICDI.<ref name="CCSDownload"/>

Release 5.x also saw the introduction of Beta support for Jlink[[J-LINK|J-Link]] [[JTAG]] debug probes from [[Segger Microcontroller Systems|Segger]].<ref name="Segger">[http://processors.wiki.ti.com/index.php/J-Link_Emulator_Support Segger Jlink support page at TI wiki]</ref>

Release 6.0.x saw the introduction of the new MSP-FET debug probe for MSP430 devices<ref>[http://www.ti.com/tool/MSP-FET MSP-FET page at TI website]</ref> and the new XDS200-class<ref>[http://www.ti.com/tool/TMDSEMU200-U XDS200 page at TI website]</ref> of debug probes for processors.

Release 6.1.x saw the introduction of the new XDS110-class<ref name="XDS110">[http://processors.wiki.ti.com/index.php/XDS110 XDS110 page at TI wiki]</ref> of debug probes for processors. It also saw the migration to full production support for Jlink[[J-LINK|J-Link]] [[JTAG]] debug probes from [[Segger Microcontroller Systems|Segger]].<ref name="Segger" />

Release 7.x saw the integration of Jlink[[J-LINK|J-Link]] [[JTAG]] debug probes from [[Segger Microcontroller Systems|Segger]]<ref name="Segger" /> directly in the CCS installer. It is also the first release to support the standalone version of XDS110.<ref name="XDS110" />

64-bit releases do not support Spectrum Digital XDS510USB JTAG debuggers.