Packet drivers is a API created in 1986 for network cards under x86-DOS like FreeDOS, DR-DOS, MS-DOS, etc.. made by FTP Software. It uses the x86 interrupt number (INT) between 0x60 .. 0x80. The exact number is detected at run-time. But it's usually 0x60. An application scan through the handlers for vectors 0x60 through 0x80 until it finds one with the text string "PKT DRVR" in the 12 bytes immediately following the entry point. The driver can handle Ethernet, Token ring, RS-232, Arcnet, X.25. [1]
Functions
| Function name | AH number |
|---|---|
| driver_info | 1 |
| access_type | 2 |
| release_type | 3 |
| send_pkt | 4 |
| terminate | 5 |
| get_address | 6 |
| reset_interface | 7 |
| +get_parameters | 10 |
| +as_send_pkt | 11 |
| *set_rcv_mode | 20 |
| *get_rcv_mode | 21 |
| *set_multicast_list | 22 |
| *get_multicast_list | 23 |
| *get_statistics | 24 |
| *set_address | 25 |
- + indicates a high-performance packet driver function
- * indicates an extended packet driver function
See also
References
- ^ "PC/TCP Packet Driver Specification". 090430 crynwr.com