FN SCAR
L'FN SCAR è un fucile d'assalto sviluppato dalla Fabrique National d'Herstal (FN)su precisa richiesta delle forze speciali statunitensi (US SOCOM).
Varianti e Progettazione
Il fucile FN SCAR nasce dalla richiesta dell'US SOCOM di un nuovo fucile da combattimento disponibile in più calibri. Le richieste iniziali prevedevano più specificatamente due armi:
- l'FN SCAR-L (da light, leggero) calibro 5,56 mm NATO;
- l'FN SCAR-H ( da 99heavy, pesante) calibro 7,62 mm NATO e facilmente adottabile sul campo di battaglia ad altri calibri ( come le M43 sovietiche).
L'idea chiave dello SCAR è la fornitura all'operatore di un'ampia varietà d'opzioni a cominciare dalla canna che può essere scelta corta per il combattimento ravvicinato o lunga per una variante di precisione che poteva utilizzare anche munizioni raccolte sul campo come quelle degli AK-47. Entrambe le versioni, sono quindi disponibili in tre varianti:
- Standard (S);
- per combattimento ravvicinato (CQC da Close Quarter Combat);
- Sniper (SV da Sniper Variant o LB da Long Barrel cioé canna lunga).
Tutte queste varianti non modificano le procedure di manutenzione, gli equipaggiamenti opzionali utilizzabili o i sistemi di controllo come il selettore di fuoco.
L'annuncio da parte dell' US SOCOM del vincitore dell'appalto arrivò nel 2004. La FN si doveva occupare della progettazione e della produzione in serie del fucile. Verso la metà del 2005, i primi SCAR erano disponibili all'utente finale: le Forze Speciali statunitensi. Poiché lo US SOCOM usa la stessa designazione della marina, le due versioni di SCAR furono chiamate Mark 16 (il light) e Mark 17 (l'heavy). Da questa data in poi, lo SCAR ha iniziato a sostituire la maggior parte dei fucili usati dalle forze SOCOM come le carabine M4 i fucili M16 e i fucili di precisione Mk.25.
Funzionamento
L'FN SCAR non è basato su nessun fucile precedente e la sua progettazione è partita da zero. In tutte le sue varianti utilizza una sistema di recupero di gas
As it turned out, FN SCAR rifles are not based on any previous weapons but designed from the scratch. In all variants FN SCAR rifles feature gas operated, short stroke piston action with rotating bolt locking. Bolt system appears to be somewhat similar to that of FN Minimi / M249 SAW machine gun. This system apparently is less sensitive to fine sand, dust and any other fouling inside the receiver, than any system with M16-type multi-lug bolt and plunger-type ejector. Receiver is made from two parts, upper and lower, connected with two cross-pins. Upper part is made from extruded aluminium, lower part is made from polymer. SCAR-L and SCAR-H use similar upper receivers that differ only in the size of ejection port. Other different parts include caliber-specific bolt, barrel, and lower receiver with integral magazine housing. Parts commonality between SCAR-L and SCAR-H is astonishing 90%. Barrels are quick-detachable, and held in the upper receiver with two cross-bolts. Barrel change procedure requires minimum amount of tools, takes just several minutes and there is no need to adjust the headspace after the change. The trigger unit with ambidextrous safety-fire mode selector switch allows for single shots and full automatic fire, with no provisions for limited-length bursts mode. The charging handle could be easily installed on either side of the weapon, so the upper receiver has respective cuts on both sides. Top of the upper receiver is covered by the full-length integral Picatinny rail (MIL-STD 1913); additional Picatinny rails are mounted on both sides and under the free-floating handguards. Side-folding polymer buttstock is adjustable for length of pull, and is shaped to provide positive cheek rest with adjustable cheek support. SCAR rifles are fitted with removable, adjustable iron sights, with folding diopter-type rear sight on the receiver rail, and folding front sight on the gas block. Any additional type of sighting equipment, necessary for current tasks, including telescope and night sights, can be installed using MIL-STD 1913 compatible mounts. Mk.16 SCAR-L rifle will use improved M16-type magazines, made of steel; Mk.17 SCAR-H will use proprietary 20-round magazines in 7.62x51 NATO chambering, or standard AK-type magazines in proposed 7.62x39 M43 chambering. Current prototypes of SCAR rifles do not have bayonet mounts, and, probably, will never have one.