This article, Power system operations and control, has recently been created via the Articles for creation process. Please check to see if the reviewer has accidentally left this template after accepting the draft and take appropriate action as necessary.
Reviewer tools: Inform author |
Power system operations is a term used in electricity generation to describe the process of decision-making on the timescale from one day (day-ahead operation[1]) to minutes[2] prior to the power delivery. The corresponding engineering branch is called Power System Operations and Control.
Day-ahead operation
Day-ahead operation schedules the generation units that can be called upon to provide the electricity on the next day (unit commitment). The dispatchable generation units can produce electricity on demand and thus can be scheduled with accuracy. The production of the weather-dependent variable renewable energy for the next day is not certain, its sources are thus non-dispatchable. This variability, coupled with uncertain future power demand and the need to accommodate possible generation and transmission failures requires scheduling of operating reserves that are not expected to produce electricity, but can be dispatched on a very short notice.[1]
Some units have unique features that require their commitment much earlier: for example, the nuclear power stations take a very long time to start, while hydroelectric plants require planning of water resources usage way in advance, therefore commitment decisions for these are made weeks or even months before prior to the delivery.[3]
For a "traditional" vertically integrated electric utility the main goal of the unit commitment is to minimize both the marginal cost of producing the unit electricity and the (quite significant for fossil fuel generation) start-up costs. In a "restructured" electricity market a market clearing algorithm is utilized, frequently in a form of an auction; the merit order is sometimes defined not just by the monetary costs, but also by the environmental concerns.[1]
Hours-ahead operation
In the hours prior to the delivery, a system operator might need to deploy additional supplemental reserves or even commit more generation units, primarily to ensure the reliability of the supply while still trying to minimize the costs. At the same time, operator must ensure that enough reactive power reserves are available to prevent the voltage collapse.[2]
This graph was using the legacy Graph extension, which is no longer supported. It needs to be converted to the new Chart extension. |
The decisions ("economic dispatch") are based on the dispatch curve, where the X-axis constitutes the system power, intervals for the generation units are placed on this axis in the merit order with the interval length corresponding to the maximum power of the unit, Y-axis values represent the marginal cost of a MWh of electricity. For cost-based decisions, the units are ordered per increasing marginal cost (per-MWh, ignoring the startup costs). The graph on the right describes an extremely simplified system, with three committed generator units:[3]
- A can deliver up to 120 MW at the cost of $30 per MWh (from 0 to 120 MW of system power);
- B can deliver up to 80 MW at $60/MWh (from 120 to 200 MW of system power);
- C is capable of 50 MW at $120/MWh (from 200 to 250 MW of system power).
Minutes-ahead operation
In the minutes prior to the delivery, a system operator is using the power-flow study algorithms in order to find the optimal power flow. At this stage the goal is reliability ("security") of the supply.[2] The practical electric networks are too complex to perform the calculations by hand, so from 1920s the calculations were automated, at first in the form of specially-built analog computers, so called network analyzers, replaced by digital computers in the 1960s.
References
- ^ a b c Conejo & Baringo 2017, p. 9.
- ^ a b c Conejo & Baringo 2017, p. 10.
- ^ a b "Economic Dispatch and Operations of Electric Utilities". psu.edu. EME 801 Energy Markets, Policy, and Regulation: Penn State University.
{{cite web}}: CS1 maint: ___location (link)
Sources
- Conejo, Antonio J.; Baringo, Luis (5 December 2017). "Power System Operations". Power System Operations. Springer. ISBN 978-3-319-69407-8. OCLC 1015677828.
Category:Electric power generation