Motore Monoalbero FIAT

Con il nome monoalbero FIAT (detto anche Fiat SOHC) si intende una famiglia di propulsori per uso automobilistico prodotti dal Gruppo FIAT a partire dal 1969 fino al 2010.

Progettato inizialmente da Aurelio Lampredi, padre anche dei ben più noti propulsori bialbero FIAT, fu costantemente aggiornato negli anni vedendo la sua cubatura crescere dagli originali 1116 cc (nella Fiat 128) fino a 1839 cc (nella Fiat Linea) pur essendo sostituito prima dal propulsore FIRE oltre che successivamente dalle famiglie di motori Pratola Serra ed E.Torq.

Contesto

 

Sezione della versione da 1.581 cc del Monoalbero FIAT

Il motore venne ideato da Lampredi durante la realizzazione della Fiat 128, infatti il gruppo torinese necessitava allora di un motore da montare trasversalmente per soddisfare le richieste del progettista Dante Giacosa in merito alla costruzione della prima Fiat a trazione anteriore. Il propulsore consisteva in un quattro cilindri in linea con monoblocco in ghisa, testata in alluminio e distribuzione con un singolo albero a camme mosso da una cinghia dentata. Caratteristica inedita fu la realizzazione del gruppo motore-trasmissione con il cambio montato lateralmente al motore, soluzione precedentemente utilizzata solo nella Autobianchi Primula. Nonostante la naturale predisposizione del motore alla disposizione trasversale unita alla trazione anteriore, ci furono delle eccezioni a trazione posteriore nella Fiat X1/9 con motore centrale e nella Tofaş Murat con il motore disposto longitudinalmente.

Una caratteristica prominente nel motore SOHC Fiat era il suo design a corsa corta, scelta tecnica effettuata poiché permetteva di utilizzare valvole più grandi rispetto alla concorrenza a parità di cubatura e, per la naturale conformazione dei motori superquadri, permetteva di ridurre le forze di inerzia e quindi di permettere al motore di raggiungere regimi particolarmente elevati.

The engine was developed for forced-induction use in the Fiat Uno Turbo. It was then further refined for the Uno Turbo Mark II, and later for the Punto GT.

As with its bigger brother the famous Fiat DOHC (aka Fiat/Lancia twincam) engine, the Fiat SOHC engine was shared with the Fiat subsidiary Lancia (appearing in 1,500 cc guise in the Lancia Delta/Prisma of the 1980s) as well as being used in the Fiat 128 derived Yugo.

The final incarnation of the 128 SOHC engine was modified to utilise 16 valves and dual cam shafts. The engine (using the designation "Torque") featured the bore-spacing, bore and stroke of the 1580 cc 159/160 series engine with a new 16 valve DOHC cylinder-head. To incorporate the extra oil-return-paths and symmetrical head (as opposed to the asymmetrical SOHC head) the cylinder-block was slightly revised making the DOHC head non-interchangeable with the previous incarnations of the 128 engine. The "Torque" engine (178.B3 - 182.A4) powered the Brava/Bravo, Marea and Multipla Fiat^{[senza fonte]} automobiles as well as the second-generation Lancia Delta (never sold in the UK), finally ending production in 1999 for the European market. In Argentina it remained on production until 2002 mostly exported to be fitted into Brazilian-made versions of the Brava, Palio, Siena, Strada and Doblò.

Engine specification

The Fiat SOHC engine was produced in a number of configurations differing in stroke and bore but maintaining a standard bore-spacing. The first generation of 128 derived engines used a stroke of 55.5 mm and a bore of 80 mm to produce a displacement of 1116 cc. The bore was increased to 86 mm (maintaining the 55.5 mm stroke) to give a displacement of 1290 cc for the X1/9. The original 1290 cc 128/X1/9 engine is the only one of the family to have used the 86 mm bore. The second generation used bores of either 80 mm or 86.4 mm with strokes of 55.5 mm or 63.9 mm giving four possible engine capacities. The final generation of SOHC engines standardised on a longer 67.4 mm stroke with either an 80.5 mm or 86.4 mm bore (giving 1372 cc and 1581 cc respectively).

Valid engine bore/stroke combinations

Stroke (mm) Bore (mm) 80 80.5 86 86.4 55.5 1116 1130 1290 1302 Capacity (cc) 63.9 1285 1301 1485 1499 67.4 1355 1372 1566 1581

Key 1st Generation 1st & 2nd Generation 2nd Generation 3rd Generation

Engine specification (by engine-number) Engine Code Bore (mm) Stroke (mm) Capacity (cc) stated Capacity (cc) calculated Production (from - to) BHP Notes 128.A.000 80 55.5 1116 1116 1969–1982 55-65 128 128.A1.000 86 55.5 1290 1290 1971 - 78 75-85 128 Rally & Sport 128.AS.000 86 55.5 1290 1290 1972–1978 75 X1/9 1300 128.A.064 80 55.5 1116 1116 1971–2008 55-64 Zastava Koral/Tempo, Skala 55 60 1.1 (21 May (company)) 128.A1.064 80 55.5 1116 1116 1979–1983 64 Zastava 101 SC-super (21 May (company)) 128.A2.064 80 55.5 1116 1116 1988–2008 60 Zastava|YUGO 60 Koral/Tempo 1.1 CW (21 May (company)) 128.AC.000 86 55.5 1290 1290 1989–1983 73 Zastava 101 Specijal (21 May (company)) 128.A7.064 86 55.5 1290 1290 1981–1986 65 Zastava 101 1300 1.3 (21 May (company)) 128.A6.064 86.4 55.5 1298 1302 1987–2008 65 Zastava YUGO Koral, Skala, Florida 65, 1.3 (21 May (company)) 11.E1.064 80 55.5 1116 1116 1986–1998 60 Zastava YUGO Koral EFI 60 (21 May (company)) Bosch Motronic MP3.1 13.E1.064 86.4 55.5 1298 1302 1986–1998 65 Zastava YUGO Koral EFI 65 (21 May (company)) Bosch Motronic MP3.1 13.E3.064 86.4 55.5 1298 1302 1988–1998 65 YUGO Florida/Sana 1.3 EFI (21 May (company)) DMB) Bosch Motronic MP3.1 11.MA.064 80 55.5 1116 1116 1998–2008 60 Zastava|YUGO Koral/Tempo 1.1 i (21 May (company)) Bosch Motronic M4.6 13.MA.064 86.4 55.5 1298 1302 1998–2008 65 Zastava|YUGO Florida, Koral/Tempo 1.3 i (21 May (company)) Bosch Motronic M4.6 131.F4.016 80.5 67.4 1372 1372 1995-2002 82 Tofaş Şahin 1.4 131.D2.016 86.4 67.4 1581 1581 1995-2002 92 Tofaş Şahin S, Kartal 131.D1.016 86.4 67.4 1581 1581 1992-2002 96 Tofaş Doğan and Kartal 1.6 S, SL, SLX (carb) 131.F3.016 86.4 67.4 1581 1581 1998-2002 96 Tofaş Doğan and Kartal 1.6 S, SLX (i.e., cat) 138.A.000 80 55.5 1116 1116 1978–1985 60 Ritmo 60 138.A1.000 86.4 55.5 1301 1302 1978–1982 75-65 Ritmo 65 138.A2.000 86.4 63.9 1498 1499 1978–1982 75-85 X1/9 1500, Ritmo 75 138.A3.000 86.4 55.5 1301 1302 1982 75 Ritmo S75 138.A4.000 86.4 63.9 1498 1499 1980–1982 75-85 X1/9 1500, Ritmo S85 138.A5.000 86.4 55.5 1301 1302 1982–1985 70 Also 138.AS.000 138.B.000 80 55.5 1116 1116 1983–1985 55 Uno 55 138.B1.000 80 55.5 1116 1116 1982–1985 55-58 Ritmo Mk II 138.B2.000 86.4 55.5 1301 1302 1983–1986 68-70 Uno 70 138.B3.000 86.4 63.9 1498 1499 1982–1985 70-85 Regata 85S 146.A4.048 80 55.5 1116 1116 1985–1989 58,5 Uno 60 146.A2.000 80.5 63.9 1301 1301 1985–1989 105 Uno Turbo Mk I 146.A2.146 80.5 63.9 1301 1301 1987–1989 99 Uno Turbo Mk I (cat) 146.A2.246 80.5 63.9 1301 1301 1989–1991 101 Uno Turbo Mk II (cat) 146.A8.000 80.5 67.4 1372 1372 1989-1994 118 Uno Turbo Mk II 146.A8.046 80.5 67.4 1372 1372 1989-1993 111 Uno Turbo Mk II (cat) 146.C1.000 80.5 67.4 1372 1372 1989–1993 72 Uno 70SXie 149.A7.000 86.4 55.5; 1301 1302 1986–1989 65 Uno 70SX 149.C1.000 86.4 63.9 1498 1499 1988 75 Uno 75 SX i.e. (cat)/Selecta 159.A2.000 80.5 67.4 1372 1372 1990–1993 76 Tipo/Tempra 1.4 (carb & i.e.) 159.A3.000 86.4 67.4 1581 1581 1990–1996 75-78 Tipo/Tempra 1.6 (carb & i.e.) 159.B9.000 86.4 67.4 1581 1584 1996 90 Tempra i.e. 160.A1.000 80.5 67.4 1372 1372 1988–1993 72 Tipo/Tempra 1.4 i.e. 160.A1.046 80.5 67.4 1372 1372 1992–1993 69 Uno Selecta 160.A2.000 86.4 67.4 1580 1581 1988–1993 83 Tipo/Tempra 1.6 (carb & i.e.) 835.C1.000 86.4 67.4 1580 1581 1993–1995 75 Tipo/Tempra 1.6 i.e. (Typ 160) 176.A4.000 80.5 67.4 1372 1372 1993–1995 136 Mk I Punto GT (GT1), CR 7.8:1 176.A4.000 80.5 67.4 1372 1372 1995–1997 133 Mk I Punto GT (GT2), CR 7.8:1 176.B6.000 80.5 67.4 1372 1372 1997–1999 130 Mk I Punto GT (GT3), CR 9.0:1 176.A9.000 86.4 67.4 1581 1581 1994–1997 88 Mk I Punto Sporting & Cabrio 835.C1.000 86.4 67.4 1581 1581 1989–1994 75-78 Lancia Dedra Mk I (1.6 i.e.) 835.A1.046 86.4 67.4 1581 1581 1989–1994 75-78 Lancia Dedra Mk I (1.6 i.e.) 835.A1.000 86.4 67.4 1581 1581 1995–1997 90 Lancia Dedra Mk II (1.6 i.e.) 182.A4.000 86.4 67.4 1581 1581 1995–2002 103 DOHC 16v, Bravo/Brava/Marea/Multipla/Lancia Dedra 1.6 16v 182.B6.000 80.5 78.4 1596 1596 2002–2005 103 DOHC 16v, Marea/Multipla/Stilo 310 A3.011 86.4 78.4 1839 1839 2008–2010 132 DOHC 16v, Brazilian Linea 1.9 16v EcoFlex

Key 1st Generation 2nd Generation 3rd Generation

Applications

List of vehicles utilising variations of the Fiat SOHC engine.

Fiat

• Fiat 128: 1969-1985
• Fiat Regata: 1985-1990
• Fiat Ritmo/Strada: 1978-1988
• Fiat Punto Mk I: 1993-1999
• Fiat Uno: 1983-1989
• Fiat Tipo: 1988-1995
• Fiat Tempra: 1990-1995
• Fiat X1/9: 1972-1989

Lancia

• Lancia Delta: 1979-1994
• Lancia Prisma: 1980s
• Lancia Dedra: 1990-1998

Zastava

• Yugo 55
• Yugo 60
• Yugo 65
• Zastava 101
• Zastava 128
• Zastava Florida
• Yugo sana 1.3 1.4

Tofaş

• Tofaş Şahin/Doğan/Kartal: 1992-2002

Induction

Production

The Fiat SOHC used the full gamut of induction techniques through its long production run. The original 128 and 138 series engines originally used a single down-draught carburettor. The carburettor was normally of progressive twin-choke design (two asymmetric sized chokes operated progressively) such as the Weber DMTR and DATR of the X1/9. Multi Point fuel Injection (MPI) was introduced late in the 138 series to help meet lowered emission requirements in the US. The original MPI system comprised a large cylindrical plenum running parallel to the engine with individual runners to each inlet port and a single throttle controlling air-flow into the plenum. This plenum was pressurised in the Mk I Uno Turbo. The plenum was slightly redesigned to a more angular "box" shape for the 3rd Generation engines and was again pressurised for the Uno and Punto GT Turbo models. For the 3rd Generation engines the down-draft carburettor was replaced with a Single Point fuel Injection system (SPI) in the base-level models. The SPI system mounts on a manifold similar to that of the carburetted models and looks, as well as acts, much like a single-choke carburettor with a single throttle plate but no venturi and a centrally mounted single injector.

Tuning & modification

Carburettor

Traditionally both down-draft (DCNF & IDF) and side-draft (DCOE) twin-choke carburettors have been used to extract more power from the 128 derived engines. IDFs are rarely used due to an incorrect orientation of the float-bowls (causing possible surge/starve issues under cornering), the correctly orientated DCNF being the preferred down-draft carburettor in this application (also having a much lower profile than the IDF). For ultimate power the DCOE carburettor is used even though the float-bowl direction matches that of the IDF (i.e. incorrect). The aforementioned carburettors are usually used in pairs (effectively giving one independently tuneable carburettor per engine-cylinder), though applications where a single DCNF/DCOE are used to feed a shared manifold do exist. DCNF's tend to be either 36 mm or 40 mm, the larger 44-DCNF is deemed too large for the engine. Both 40-DCOE and 45-DCOE are commonly used where space allows.^[1]

MPI

Tuning of the early MPI systems has previously been difficult as the electronic control systems are analogue making them difficult to "re-map". Low-cost DIY Fuel Injection (FI) controllers (such as MegaSquirt) have made it easier to alter the characteristics of the early MPI systems and release similar potential as the DCNF/DCOE carburettors. It is possible to "chip" the later digital MPI systems though aftermarket FI controllers again give greater flexibility.

Throttle bodies

Individual FI Throttle Bodies (TBs) are available for mounting to DCNF and DCOE manifolds as well as custom-built FI systems which, with aftermarket controllers, give the most flexibility and control over fuelling out of all the options.

Motorcycle carburettors

Motorcycle, or "bike" carburettors, being a modern and cost-effective alternative to DCOE/DCNFs, have been adapted to work with the 128-derived engines. They potentially offer better control over fuelling than DCNF/DCOE, but their use on the Fiat SOHC engine is still in its infancy.

Camshaft profile

The camshaft was a main methods of varying the 128 series engines characteristics for different applications/markets. The high-revving oversquare design of the 128 engine lends itself to high-overlap high-duration cam profiles better than more traditional square/under-square engine designs without losing drivability.^[2] Though a beneficial characteristic for sports orientated engine the high-overlap high-duration cam design gives poor emissions output which was unacceptable under the tightened US emissions regulations. To remedy this (in addition to the introduction of MPI) camshafts for emission-restricted markets featured asthmatic low-lift, low-duration, low-overlap profiles totally unsuited to the nature of the 128 engine.

Standard production camshaft specifications

Profile	Duration (degrees)	Overlap (degrees)	Lift (mm)	Clearance (mm) Inlet/Exhaust	Application
12/52-52/12	244	24	-	-	1.1 L 128 - European Specification
10/54-54/10	244	20	-	-	1.1 L 128 - North-American Specification
24/68-68/24	272	48	9.85	-	128 Rally
24/68-68/24	272	48	9.85	-	1300 X1/9 - European Specification
10/54-54/10	244	20	-	-	1300 X1/9 - North-American Specification
12/52-52/12	244	24	-	-	1300 X1/9 - Australian Specification
24/68-68/24	272	48	9.9	-	1500 X1/9 - European Specification (carb)
10/54-54/10	244	20	-	-	1500 X1/9 - North-American Specification (FI)
10/54-54/10	244	20	-	-	1500 X1/9 - Australian Specification (carb)
9/39-31/1	228-212	10	8	-	1.3 L Uno
0/30-40/10	210-230	10	8	-	1.3 L Uno Turbo
14/36-44/6	230	20	8.8	-	1.4 L Uno Turbo
7/35-37/5	222	12	8.8	0.4/0.5	1.6 Tipo

Tuning and modification

Fast-road/race camshaft specifications

Manufacturer	Profile name	Profile	Duration (degrees)	Overlap (degrees)	Lift (mm)	Clearance (mm) Inlet/Exhaust	Application
Kent	FT7	35/67-67/35	282	70	10.33	0.20 / 0.20	NA - fast road
Kent	FT8	52/76-76/52	308	104	10.82	0.20 / 0.20	NA - race
Piper	BP270	33/67-67/33	280	66	9.80	0.20 / 0.20	NA - fast road
Piper	BP285	36/72-72/36	288	72	10.40	0.20 / 0.20	NA - fast road
Piper	BP300	39/71-71/39	290	78	11.18	0.25 / 0.25	NA - race
Piper	BP320	53/83-83/53	316	106	11.18	0.25 / 0.25	NA - race

Footnotes

1. ^ To fit DCOE carburettors in an X1/9 a small amount of bodywork must be removed/reshaped
2. ^ The standard European carburettord X1/9 used a camshaft more radical than many after-market "performance" camshafts offered for contemporary engines from other (non Italian) European manufacturers.

[[Categoria:Motori Fiat]]