Packet forwarding: Difference between revisions

Revision as of 04:17, 19 September 2005

Latest revision as of 00:40, 8 August 2025

(92 intermediate revisions by 63 users not shown)

Line 1:

''Forwarding''{{Short is the relayingdescription|Relaying of [[packet|packets]] from one [[network segment]] to another}}

{{refimprove|date=July 2009}}

to another by [[node (networking)|nodes]]

in a [[packet switching|packet switched]] [[computer network]].

'''Packet forwarding''' is the relaying of [[Packet (information technology)|packet]]s from one [[network segment]] to another by [[node (networking)|nodes]] in a [[computer network]].

The simplest forwarding model - [[unicast|unicasting]] - involves a packet being

relayed from link to link along a chain leading from the packet's

source to its destination. However, other forwarding strategies

are commonly used. [[Broadcasting (networks)|Broadcasting]] requires a packet to be

duplicated and copies sent on multiple links with the goal

of delivering a copy to every device on the network.

In practice, broadcast packets are not forwarded everywhere

on a network, but only to devices within a [[broadcast ___domain]].

Less common than broadcasting, but perhaps of greater

utility and theoretical signicicance is [[multicast|multicasting]],

where a packet is selectively duplicated and copies

delivered to each of a set of recipients.

==Models==

At nodes where multiple outgoing links are available, the

[[Image:unicast forwarding.png|frame|A [[unicast]] forwarding pattern, typical of many networking technologies including the overwhelming majority of [[Internet]] traffic]] [[Image:multicast forwarding.png|frame|A [[multicast]] forwarding pattern, typical of [[Protocol Independent Multicast|PIM]]]] [[Image:broadcast forwarding.png|frame|A [[Broadcasting (networking)|broadcast]] forwarding pattern, typical of [[bridging (networking)|bridged]] [[Ethernet]]]]

choice of which, all, or any to use requires a decision

making process that, while simple in concept, is of

sometimes bewildering complexity. Since a forwarding

decision must be made for every packet handled by a

node, the total time required for this can become

a major limiting factor in the overall performance

of a packet-switched network.

Much of the design effort of high-speed [[routers]]

has been focused on making rapid forwarding decisions

for large numbers of packets.

The simplest forwarding model{{mdashb}}[[unicast]]ing{{mdashb}}involves a packet being relayed from link to link along a chain leading from the packet's source to its destination. However, other forwarding strategies are commonly used. Broadcasting requires a packet to be duplicated and copies sent on multiple links with the goal of delivering a copy to every device on the network. In practice, broadcast packets are not forwarded everywhere on a network, but only to devices within a [[broadcast ___domain]], making ''broadcast'' a relative term. Less common than broadcasting, but perhaps of greater utility and theoretical significance, is [[multicast]]ing, where a packet is selectively duplicated and copies delivered to each of a set of recipients.

The forwarding decision is generally made using one

of two processes: [[routing]], which uses information

Networking technologies tend to naturally support certain forwarding models. For example, fiber optics and copper cables run directly from one machine to another to form a natural unicast media{{snd}}data transmitted at one end is received by only one machine at the other end. However, as illustrated in the diagrams, nodes can forward packets to create multicast or broadcast distributions from naturally unicast media. Likewise, traditional [[Ethernet]] ([[10BASE5]] and [[10BASE2]], but not the more modern [[10BASE-T]]) are natural broadcast media{{snd}}all the nodes are attached to a single long cable and a packet transmitted by one device is seen by every other device attached to the cable. Ethernet nodes implement unicast by ignoring packets not directly addressed to them. A [[wireless network]] is naturally multicast{{snd}} all devices within a reception radius of a transmitter can receive its packets. Wireless nodes ignore packets addressed to other devices, but require forwarding to reach nodes outside their reception radius.

encoded in a device's address to infer its ___location

on the network, or bridging, which makes no

==Decisions==

assumptions about where addresses are located and

At nodes where multiple outgoing links are available, the choice of which, all, or any to use for forwarding a given packet requires a decision-making process that, while simple in concept, is sometimes bewilderingly complex. Since a forwarding decision must be made for every packet handled by a node, the total time required for this can become a major limiting factor in overall network performance. Much of the design effort of high-speed [[Router (computing)|routers]] and [[network switch|switches]] has been focused on making rapid forwarding decisions for large numbers of packets.

depends heavily on [[broadcasting (networks)|broadcasting]] to located unknown

addresses. The heavy overhead of broadcasting has

The forwarding decision is generally made using one of two processes: [[routing]], which uses information encoded in a device's address to infer its ___location on the network, or [[bridging (networking)|bridging]], which makes no assumptions about where addresses are located and depends heavily on broadcasting to locate unknown addresses. The heavy overhead of broadcasting has led to the dominance of routing in large networks, particularly the [[Internet]]; bridging is largely relegated to small networks where the overhead of broadcasting is tolerable. However, since large networks are usually composed of many smaller networks linked together, it would be inaccurate to state that bridging has no use on the Internet; rather, its use is localized.

led to the dominance of [[routing]] in large networks,

particuarly the [[Internet]]; bridging is largely

==Methods==

relegated to small networks where the overhead

A node can use one of two different methods to forward packets: [[store-and-forward]] or [[cut-through switching]].<ref>{{cite thesis |author=Stefan Haas |url=http://inspirehep.net/record/887357/files/cer-002474543.pdf |title=The IEEE 1355 Standard: Developments, Performance and Application in High Energy Physics |date=1998 |page=58 |accessdate=2015-01-16}}</ref>

of broadcasting is tolerable. However, since

large networks are usually composed of many

==See also==

smaller networks linked together, it would

* [[Equal-cost multi-path routing]]

be inaccurate to state that bridging has

* [[Forwarding information base]]

no use on the Internet; rather, its use is

* [[Node-to-node data transfer]]

localized.

* [[Per-hop behaviour]]

* [[Port forwarding]]

==References==

{{reflist}}

{{DEFAULTSORT:Packet Forwarding}}

[[Category:Routing]]